Configuring a VRF Under an OSPFv3 Instance

Configuring an IPv6 Address Family

Configuring an IPv6 Address Family

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3DomAf": {
                            "attributes": {
                              "type": "ipv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <af-items>
              <DomAf-list>
                <type>ipv6-ucast</type>
              </DomAf-list>
            </af-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   address-family ipv6 unicast

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3DomAf Properties

The following table contains information about the ospfv3DomAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an IPv6 Address Family

Deleting an IPv6 Address Family

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3DomAf": {
                            "attributes": {
                              "status": "deleted",
                              "type": "ipv6-ucast"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <af-items>
              <DomAf-list nc:operation="delete">
                <type>ipv6-ucast</type>
              </DomAf-list>
            </af-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no address-family ipv6 unicast

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3DomAf Properties

The following table contains information about the ospfv3DomAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Enabling Graceful Restart Only for a Planned Restart

Enabling Graceful Restart Only for a Planned Restart

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3Gr": {
                            "attributes": {
                              "ctrl": "planned-only"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <gr-items>
              <ctrl>planned-only</ctrl>
            </gr-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   graceful-restart planned-only

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Gr Properties

The following table contains information about the ospfv3Gr properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling Graceful Restart

Disabling Graceful Restart 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3Gr": {
                            "attributes": {
                              "ctrl": "disabled"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <gr-items>
              <ctrl>disabled</ctrl>
            </gr-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no graceful-restart planned-only

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Gr Properties

The following table contains information about the ospfv3Gr properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configure Maximum Interval to Restart Gracefully

Configure Maximum Interval to Restart Gracefully

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3Gr": {
                            "attributes": {
                              "gracePeriod": "1386"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <gr-items>
              <gracePeriod>1386</gracePeriod>
            </gr-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   graceful-restart grace-period 1386

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Gr Properties

The following table contains information about the ospfv3Gr properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Maximum Interval to Restart Gracefully

Deleting Maximum Interval to Restart Gracefully

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3Gr": {
                            "attributes": {
                              "gracePeriod": "60"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <gr-items>
              <gracePeriod>60</gracePeriod>
            </gr-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no graceful-restart grace-period 1386

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Gr Properties

The following table contains information about the ospfv3Gr properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Helper-disable

Configuring Helper-disable

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3Gr": {
                            "attributes": {
                              "helper": "no"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <gr-items>
              <helper>false</helper>
            </gr-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   graceful-restart helper-disable

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Gr Properties

The following table contains information about the ospfv3Gr properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Unconfiguring Helper-disable

Unconfiguring Helper

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1"
                      },
                      "children": [
                        {
                          "ospfv3Gr": {
                            "attributes": {
                              "helper": "yes"
                            }
                          }
                        }
                      ]
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <gr-items>
              <helper>true</helper>
            </gr-items>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no graceful-restart helper-disable

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Gr Properties

The following table contains information about the ospfv3Gr properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Enable name-lookup for OSPFv3

Enable name-lookup for OSPFv3

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1",
                        "nameLookup": "yes"
                      }
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <nameLookup>true</nameLookup>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   name-lookup

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disable name-lookup for OSPFv3

Disable name-lookup for OSPFv3

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1",
                        "nameLookup": "no"
                      }
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <nameLookup>false</nameLookup>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no name-lookup

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Suppressing Routing Updates on the Interface (Interfaces Passive by Default)

Suppressing Routing Updates on the Interface (Interfaces Passive by Default)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1",
                        "passiveIntfDefault": "yes"
                      }
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <passiveIntfDefault>true</passiveIntfDefault>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   passive-interface default

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Unsuppressing Routing Updates on the Interface(Interfaces non-passive by Default)

Unsuppressing Routing Updates on the Interface (Interfaces non-passive by Default)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "VRF_1",
                        "passiveIntfDefault": "no"
                      }
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <passiveIntfDefault>false</passiveIntfDefault>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no passive-interface default

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Shutting Down the OSPFv3 Instance

Shutting Down the OSPF Protocol Instance

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "adminSt": "disabled",
                        "name": "VRF_1"
                      }
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <adminSt>disabled</adminSt>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   shutdown

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Unconfiguring the shutdown of OSPFv3 Protocol Instance

Unconfiguring the shutdown of OSPFv3 Protocol Instance 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "ospfv3Entity": {
          "children": [
            {
              "ospfv3Inst": {
                "attributes": {
                  "name": "Test_1"
                },
                "children": [
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "adminSt": "enabled",
                        "name": "VRF_1"
                      }
                    }
                  },
                  {
                    "ospfv3Dom": {
                      "attributes": {
                        "name": "default"
                      }
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <ospfv3-items>
    <inst-items>
      <Inst-list>
        <name>Test_1</name>
        <dom-items>
          <Dom-list>
            <name>VRF_1</name>
            <adminSt>enabled</adminSt>
          </Dom-list>
          <Dom-list>
            <name>default</name>
          </Dom-list>
        </dom-items>
      </Inst-list>
    </inst-items>
  </ospfv3-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router ospfv3 Test_1
  vrf VRF_1
   no shutdown

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

ospfv3Inst Properties

The following table contains information about the ospfv3Inst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

ospfv3Dom Properties

The following table contains information about the ospfv3Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html