Configuring an L2VPN EVPN Address Family under a Neighbor

Configuring a Route Map to Specify Import Criteria

Configuring a Route Map to Specify Import Criteria

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "l2vpn-evpn"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importRt": "yes",
                                    "importType": "vpn-unicast",
                                    "reoriginate": "no",
                                    "rtMap": "SampleString_123"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>l2vpn-evpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list>
                      <importType>vpn-unicast</importType>
                      <importRt>true</importRt>
                      <reoriginate>false</reoriginate>
                      <rtMap>SampleString_123</rtMap>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family l2vpn evpn
    import vpn unicast route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Route Map to Specify Import Criteria

Deleting a Route Map to Specify Import Criteria

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "l2vpn-evpn"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importType": "vpn-unicast",
                                    "status": "deleted"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>l2vpn-evpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list nc:operation="delete">
                      <importType>vpn-unicast</importType>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family l2vpn evpn
    no import vpn unicast route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reoriginating the Route with a New RT

Reoriginating the Route with a New RT

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "l2vpn-evpn"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importRt": "yes",
                                    "importType": "vpn-unicast",
                                    "reoriginate": "yes",
                                    "rtMap": ""
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>l2vpn-evpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list>
                      <importType>vpn-unicast</importType>
                      <importRt>true</importRt>
                      <reoriginate>true</reoriginate>
                      <rtMap></rtMap>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family l2vpn evpn
    import vpn unicast reoriginate

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Reoriginating Config

Deleting the Reoriginating Config

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "l2vpn-evpn"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importType": "vpn-unicast",
                                    "status": "deleted"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>l2vpn-evpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list nc:operation="delete">
                      <importType>vpn-unicast</importType>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family l2vpn evpn
    no import vpn unicast reoriginate

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Importing the Routes into Another Address Family (VPN EVPN Under a L2VPN EVPN AF)

Importing the Routes into Another Address Family (VPN EVPN Under a L2VPN EVPN AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "l2vpn-evpn"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importRt": "yes",
                                    "importType": "vpn-unicast",
                                    "reoriginate": "no",
                                    "rtMap": "SampleString_123"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>l2vpn-evpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list>
                      <importType>vpn-unicast</importType>
                      <importRt>true</importRt>
                      <reoriginate>false</reoriginate>
                      <rtMap>SampleString_123</rtMap>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family l2vpn evpn
    import vpn unicast route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Routes Imported into another Address Family (VPN EVPN Under a L2VPN EVPN AF)

Deleting the Routes Imported into another Address Family (VPN EVPN Under a L2VPN EVPN AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "type": "l2vpn-evpn"
                            },
                            "children": [
                              {
                                "bgpImportRt": {
                                  "attributes": {
                                    "importType": "vpn-unicast",
                                    "status": "deleted"
}}}]}}]}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>l2vpn-evpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <import-items>
                    <ImportRt-list nc:operation="delete">
                      <importType>vpn-unicast</importType>
                    </ImportRt-list>
                  </import-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
  neighbor 1.2.3.4
   address-family l2vpn evpn
    no import vpn unicast route-map SampleString_123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

bgpImportRt Properties

The following table contains information about the bgpImportRt properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html