Configuring LDP Session Backoff

Configuring LDP Session Backoff Parameters

Configuring LDP Session Backoff Parameters

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpBackoffParams": {
                "attributes": {
                  "initBackoff": "100",
                  "maxBackoff": "300"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <backoffparams-items>
      <initBackoff>100</initBackoff>
      <maxBackoff>300</maxBackoff>
    </backoffparams-items>
  </ldp-items>
</System>

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

mpls ldp configuration
backoff 100 300

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
topSystem	sys
mplsldpLDP	sys/ldp
mplsldpBackoffParams	sys/ldp/backoffparams

mplsldpLDP Properties

The following table contains information about the mplsldpLDP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
adminSt	nw:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled

mplsldpBackoffParams Properties

The following table contains information about the mplsldpBackoffParams properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
initBackoff	mplsldp:InitBackoff (scalar:Uint32)	Initial session backoff time (seconds)	RANGE: [5 , 2147483] DEFAULT: 15
maxBackoff	mplsldp:MaxBackoff (scalar:Uint32)	Maximum session backoff time (seconds)	RANGE: [5 , 2147483] DEFAULT: 120

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting LDP Session Backoff Parameters

Deleting LDP Session Backoff Parameters

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "mplsldpLDP": {
          "attributes": {
            "adminSt": "enabled"
          },
          "children": [
            {
              "mplsldpBackoffParams": {
                "attributes": {
                  "initBackoff": "15",
                  "maxBackoff": "120"
}}}]}}]}}

{
    imdata:[]
}

<System>
  <ldp-items>
    <adminSt>enabled</adminSt>
    <backoffparams-items>
      <initBackoff>15</initBackoff>
      <maxBackoff>120</maxBackoff>
    </backoffparams-items>
  </ldp-items>
</System>