Configuring License Reservation

For more information, see the Cisco NX-OS Licensing Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-installation-and-configuration-guides-list.html/

Enabling License Reservation

Enabling License Reservation
POST http://<mgmt0_IP>/api/mo/sys/fm.json
{
  "fmEntity": {
    "children": [
      {
        "fmSmartReservation": {
          "attributes": {
            "adminSt": "enabled"
}}}]}}
{
    imdata:[]
}
<System>
  <fm-items>
    <smartreservation-items>
      <adminSt>enabled</adminSt>
    </smartreservation-items>
  </fm-items>
</System>

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

license smart reservation


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
fmEntity sys/fm
fmSmartReservation sys/fm/smartreservation


fmSmartReservation Properties

The following table contains information about the fmSmartReservation properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
adminStfm:AdminState
(scalar:Enum8)
Admin statusSELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling License Reservation

Disabling License Reservation
POST http://<mgmt0_IP>/api/mo/sys/fm.json
{
  "fmEntity": {
    "children": [
      {
        "fmSmartReservation": {
          "attributes": {
            "adminSt": "disabled"
}}}]}}
{
    imdata:[]
}
<System>
  <fm-items>
    <smartreservation-items>
      <adminSt>disabled</adminSt>
    </smartreservation-items>
  </fm-items>
</System>

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no license smart reservation


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
fmEntity sys/fm
fmSmartReservation sys/fm/smartreservation


fmSmartReservation Properties

The following table contains information about the fmSmartReservation properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
adminStfm:AdminState
(scalar:Enum8)
Admin statusSELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html