Cisco Nexus 3000 and 9000 Series NX-API REST SDK API, Release 9.3(x)

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Configuring an RP in an Anycast-RP Set

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/pim6/inst.json
{
  "pim6Inst": {
    "children": [
      {
        "pim6Dom": {
          "attributes": {
            "name": "default"
          },
          "children": [
            {
              "pim6AcastRpFuncP": {
                "children": [
                  {
                    "pim6AcastRpPeer": {
                      "attributes": {
                        "addr": "1:2::3:4/128",
                        "rpSetAddr": "4:3::2:1/128"
}}}]}}]}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <pim6-items>
    <inst-items>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <acastrpfunc-items>
            <peer-items>
              <AcastRpPeer-list>
                <addr>1:2::3:4/128</addr>
                <rpSetAddr>4:3::2:1/128</rpSetAddr>
              </AcastRpPeer-list>
            </peer-items>
          </acastrpfunc-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </pim6-items>
</System>

Configuring PIM6 in Global Configuration Mode

Configuring an RP in an Anycast-RP Set

Note: This example was added in Release 9.2(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ipv6 pim anycast-rp 1:2::3:4 4:3::2:1

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AcastRpFuncP	sys/pim6/inst/dom-{name}/acastrpfunc
pim6AcastRpPeer	sys/pim6/inst/dom-{name}/acastrpfunc/peer-{[addr]}-peer-{[rpSetAddr]}

pim6Dom Properties

The following table contains information about the pim6Dom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6AcastRpPeer Properties

The following table contains information about the pim6AcastRpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
addr	address:Ip	Address	Value must match ipv4 or ipv6 known format
rpSetAddr	address:Ip	IP Address of node performing the function	Value must match ipv4 or ipv6 known format

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an RP in an Anycast-RP Set

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim anycast-rp 1:2::3:4 4:3::2:1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AcastRpFuncP	sys/pim6/inst/dom-{name}/acastrpfunc
pim6AcastRpPeer	sys/pim6/inst/dom-{name}/acastrpfunc/peer-{[addr]}-peer-{[rpSetAddr]}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6AcastRpPeer Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Address	Value must match ipv4 or ipv6 known format
rpSetAddr	address:Ip	IP Address of node performing the function	Value must match ipv4 or ipv6 known format
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Remove Routes When Restarting PIM6

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim flush-routes

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
flushRoutes	scalar:Bool	Flush Routes	SELECTION: true or false
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Remove Routes When Restarting PIM6

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim flush-routes

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
flushRoutes	scalar:Bool	Flush Routes	SELECTION: true or false
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Log Up/Down PIM6 Neighbor Transitions

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim log-neighbor-changes

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
logNbhChng	scalar:Bool	Log Neighbhor changes	SELECTION: true or false
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Log Up/Down PIM6 Neighbor Transitions

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim log-neighbor-changes

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
logNbhChng	scalar:Bool	Log Neighbhor changes	SELECTION: true or false
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Enable Listening or Forwarding of Auto-RP Messages

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim auto-rp listen

Note: The property information for this example was added in Release 9.3(3).

MO	DN
topSystem	sys
pim6Entity	sys/pim6
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Enable Listening or Forwarding of Auto-RP Messages

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim auto-rp listen

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Enabling the Forwading of Auto-RP Messages

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim auto-rp forward

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling the Forwading of Auto-RP Messages

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim auto-rp forward

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Creating a Configuration to Listen to Bootstrap Messages

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr listen

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrP Properties

The following table contains information about the pim6BsrP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
ctrl	rtdmc:BSRCtrl (scalar:Bitmask8)	Control	SELECTION: 1 - listen 2 - forward

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Configuration to Listen to Bootstrap Messages

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr listen

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrP Properties

Property Name	Data Type	Description	Values
ctrl	rtdmc:BSRCtrl (scalar:Bitmask8)	Control	SELECTION: 1 - listen 2 - forward

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Creating a Configuration to Forward Bootstrap Messages

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr forward

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrP Properties

Property Name	Data Type	Description	Values
ctrl	rtdmc:BSRCtrl (scalar:Bitmask8)	Control	SELECTION: 1 - listen 2 - forward

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Configuration to Forward Bootstrap Messages

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr forward

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrP Properties

Property Name	Data Type	Description	Values
ctrl	rtdmc:BSRCtrl (scalar:Bitmask8)	Control	SELECTION: 1 - listen 2 - forward

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Group Ranges Through Policy

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim use-shared-tree-only group-list RT_Map1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6SharedRangeP	sys/pim6/inst/dom-{name}/asm/shared

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6SharedRangeP Properties

The following table contains information about the pim6SharedRangeP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
pfxList	string:Basic	Prefix List	A sequence of characters
rtMap	string:Basic	Route Map	A sequence of characters
useSPTCommand	scalar:Bool	Flag to use spt-threashold command	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Group Ranges Through Policy

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim use-shared-tree-only group-list RT_Map1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6SharedRangeP	sys/pim6/inst/dom-{name}/asm/shared

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6SharedRangeP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Source-Tree Switching Threshold to Never Switch to Source Tree for a Group List

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim spt-threshold infinity group-list RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6SharedRangeP	sys/pim6/inst/dom-{name}/asm/shared

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6SharedRangeP Properties

Property Name	Data Type	Description	Values
pfxList	string:Basic	Prefix List	A sequence of characters
rtMap	string:Basic	Route Map	A sequence of characters
useSPTCommand	scalar:Bool	Flag to use spt-threashold command	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source-Tree Switching Threshold to Never Switch to Source Tree for a Group List

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim spt-threshold infinity group-list RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6SharedRangeP	sys/pim6/inst/dom-{name}/asm/shared

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6SharedRangeP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Bootstrap Protocol RP-Distribution Priority

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr bsr-candidate ethernet 1/1 hash-len 10 priority 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6BsrFuncP	sys/pim6/inst/dom-{name}/bsr/bsrfunc

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrFuncP Properties

The following table contains information about the pim6BsrFuncP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
hashLen	rtdmc:BSRHashLen (scalar:Uint16)	Hash Mask Len	RANGE: [0, 65535]
interval	rtdmc:BSRInterval (scalar:Uint16)	Interval	RANGE: [1 , 65535] DEFAULT: 60
prio	rtdmc:BSRPrio (scalar:Uint16)	Priority	RANGE: [1 , 255] DEFAULT: 64
srcIf	nw:IfId (base:IfIndex)	Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Bootstrap Protocol RP-Distribution Priority

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr bsr-candidate ethernet 1/1 hash-len 10 priority 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6BsrFuncP	sys/pim6/inst/dom-{name}/bsr/bsrfunc

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrFuncP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Priority and Interval for a Policy That Filters RP-Candidate Messages

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr rp-candidate ethernet 1/1 group-list FF02:0:0:0:0:1:FF00:0000/1 priority 123 interval 12

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFuncP	sys/pim6/inst/dom-{name}/bsr/rpfunc
pim6RpGrpRange	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}/range-{bidir}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFuncP Properties

The following table contains information about the pim6RpFuncP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
interval	rtdmc:BSRInterval (scalar:Uint16)	Interval	RANGE: [1 , 65535] DEFAULT: 60
prio	rtdmc:BSRPrio (scalar:Uint16)	Priority	RANGE: [1 , 255] DEFAULT: 64
srcIf	nw:IfId (base:IfIndex)	Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

pim6RpGrpRange Properties

The following table contains information about the pim6RpGrpRange properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
bidir	scalar:Bool	BiDir Groups	SELECTION: true or false
grpList	address:Ip	Group List	Value must match ipv4 or ipv6 known format
pfxList	string:Basic	Prefix List	A sequence of characters
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Priority and Interval for a Policy That Filters RP-Candidate Messages

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr rp-candidate ethernet 1/1 group-list FF02:0:0:0:0:1:FF00:0000/1 priority 123 interval 12

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFuncP	sys/pim6/inst/dom-{name}/bsr/rpfunc

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFuncP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Filtering RP Candidate Messages with the Specified Route Map, Interval, and Prioriy Level

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr rp-candidate ethernet 1/1 route-map RtMap_1 priority 123 interval 12

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFuncP	sys/pim6/inst/dom-{name}/bsr/rpfunc
pim6RpGrpRange	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}/range-{bidir}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFuncP Properties

Property Name	Data Type	Description	Values
interval	rtdmc:BSRInterval (scalar:Uint16)	Interval	RANGE: [1 , 65535] DEFAULT: 60
prio	rtdmc:BSRPrio (scalar:Uint16)	Priority	RANGE: [1 , 255] DEFAULT: 64
srcIf	nw:IfId (base:IfIndex)	Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

pim6RpGrpRange Properties

Property Name	Data Type	Description	Values
bidir	scalar:Bool	BiDir Groups	SELECTION: true or false
grpList	address:Ip	Group List	Value must match ipv4 or ipv6 known format
pfxList	string:Basic	Prefix List	A sequence of characters
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Filtering RP Candidate Messages with the Specified Route Map, Interval, and Prioriy Level

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr rp-candidate ethernet 1/1 route-map RtMap_1 priority 123 interval 12

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFuncP	sys/pim6/inst/dom-{name}/bsr/rpfunc

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFuncP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Static RP for a Group Range

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim rp-address 1:2::3:4 route-map RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6StaticRPP	sys/pim6/inst/dom-{name}/staticrp
pim6StaticRP	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}
pim6RpGrpRange	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}/range-{bidir}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6StaticRP Properties

The following table contains information about the pim6StaticRP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
addr	address:Ip	Address	Value must match ipv4 or ipv6 known format

pim6RpGrpRange Properties

Property Name	Data Type	Description	Values
bidir	scalar:Bool	BiDir Groups	SELECTION: true or false
override	scalar:Bool	Flag to override RP preference to choose static RP	SELECTION: true or false
pfxList	string:Basic	Prefix List	A sequence of characters
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Static RP for a Group Range

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim rp-address 1:2::3:4 route-map RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6StaticRPP	sys/pim6/inst/dom-{name}/staticrp
pim6StaticRP	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6StaticRP Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Address	Value must match ipv4 or ipv6 known format
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Override and Prefix List Policy for a Static RP

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim rp-address 1:2::3:4 prefix-list List_1 override

Note: The property information for this example was added in Release 9.3(3).

MO	DN
topSystem	sys
pim6Entity	sys/pim6
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6StaticRPP	sys/pim6/inst/dom-{name}/staticrp
pim6StaticRP	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}
pim6RpGrpRange	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}/range-{bidir}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6StaticRP Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Address	Value must match ipv4 or ipv6 known format

pim6RpGrpRange Properties

Property Name	Data Type	Description	Values
bidir	scalar:Bool	BiDir Groups	SELECTION: true or false
override	scalar:Bool	Flag to override RP preference to choose static RP	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Override and Prefix List Policy for a Static RP

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim rp-address 1:2::3:4 prefix-list List_1 override

Note: The property information for this example was added in Release 9.3(3).

MO	DN
topSystem	sys
pim6Entity	sys/pim6
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6StaticRPP	sys/pim6/inst/dom-{name}/staticrp
pim6StaticRP	sys/pim6/inst/dom-{name}/staticrp/rp-{[addr]}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6StaticRP Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Address	Value must match ipv4 or ipv6 known format
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the State Limit

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim state-limit 1234 reserved RtMap_1 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6ResP	sys/pim6/inst/dom-{name}/limit

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6ResP Properties

The following table contains information about the pim6ResP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
max	mcast:NumEntries (scalar:Uint32)	Maximum Multicast Entries	RANGE: [0 , 4294967295] DEFAULT: 0
rsvd	mcast:NumEntries (scalar:Uint32)	Reserved Multicast Entries	RANGE: [0 , 4294967295] DEFAULT: 0
rtMap	string:Basic	Reserved Entries Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the State Limit

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim state-limit 1234 reserved RtMap_1 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6ResP	sys/pim6/inst/dom-{name}/limit

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6ResP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Filtering Mapping Agent Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim auto-rp mapping-agent-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Filtering Mapping Agent Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim auto-rp mapping-agent-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Filtering Mapping Agent Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim auto-rp mapping-agent-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Filtering Mapping Agent Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim auto-rp mapping-agent-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Auto-RP Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim auto-rp rp-candidate-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

The following table contains information about the pim6RpFilterP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Auto-RP Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim auto-rp rp-candidate-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Auto-RP Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim auto-rp rp-candidate-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Auto-RP Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim auto-rp rp-candidate-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Filtering BSR Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr bsr-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6BsrFilterP	sys/pim6/inst/dom-{name}/bsr/bsrfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrFilterP Properties

The following table contains information about the pim6BsrFilterP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Filtering BSR Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr bsr-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6BsrFilterP	sys/pim6/inst/dom-{name}/bsr/bsrfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrFilterP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Filtering BSR Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr bsr-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6BsrFilterP	sys/pim6/inst/dom-{name}/bsr/bsrfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrFilterP Properties

Property Name	Data Type	Description	Values
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Filtering BSR Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr bsr-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6BsrFilterP	sys/pim6/inst/dom-{name}/bsr/bsrfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6BsrFilterP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Bootstrap Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr rp-candidate-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Bootstrap Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr rp-candidate-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Bootstrap Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim bsr rp-candidate-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
rtMap	string:Basic	Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Bootstrap Protocol RP-Distribution Configuration Policy for Filtering RP Candidate Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim bsr rp-candidate-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6BsrP	sys/pim6/inst/dom-{name}/bsr
pim6RpFilterP	sys/pim6/inst/dom-{name}/bsr/rpfilter

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RpFilterP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Receiving Register Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim register-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6RegTrP	sys/pim6/inst/dom-{name}/asm/reg

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RegTrP Properties

The following table contains information about the pim6RegTrP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
pfxList	string:Basic	Register Message Prefix List	A sequence of characters
rtMap	string:Basic	Register Message Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Receiving Register Messages with a Route Map

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim register-policy RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6RegTrP	sys/pim6/inst/dom-{name}/asm/reg

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RegTrP Properties

Property Name	Data Type	Description	Values
pfxList	string:Basic	Register Message Prefix List	A sequence of characters
rtMap	string:Basic	Register Message Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Policy for Receiving Register Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim register-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6RegTrP	sys/pim6/inst/dom-{name}/asm/reg

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RegTrP Properties

Property Name	Data Type	Description	Values
pfxList	string:Basic	Register Message Prefix List	A sequence of characters
rtMap	string:Basic	Register Message Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Policy for Receiving Register Messages with a Route Policy

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim register-policy RT_POL

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6AsmPatP	sys/pim6/inst/dom-{name}/asm
pim6RegTrP	sys/pim6/inst/dom-{name}/asm/reg

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6RegTrP Properties

Property Name	Data Type	Description	Values
pfxList	string:Basic	Register Message Prefix List	A sequence of characters
rtMap	string:Basic	Register Message Route Map	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Group Range Policy for SSM Range

Note: This example was added in Release 9.2(1).

CLI Commands

ipv6 pim ssm route-map RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6SsmPatP	sys/pim6/inst/dom-{name}/ssm
pim6SsmRangeP	sys/pim6/inst/dom-{name}/ssm/range

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6SsmRangeP Properties

The following table contains information about the pim6SsmRangeP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
grpList	address:Ip	Group List	Value must match ipv4 or ipv6 known format
grpList1	address:Ip	Group List	Value must match ipv4 or ipv6 known format
grpList2	address:Ip	Group List	Value must match ipv4 or ipv6 known format
grpList3	address:Ip	Group List	Value must match ipv4 or ipv6 known format
pfxList	string:Basic	Prefix List	A sequence of characters
rtMap	string:Basic	Route Map	A sequence of characters
ssmNone	scalar:Bool	SSM None	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Group Range Policy for SSM Range

Note: This example was added in Release 9.2(1).

CLI Commands

no ipv6 pim ssm route-map RtMap_1

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}
pim6SsmPatP	sys/pim6/inst/dom-{name}/ssm
pim6SsmRangeP	sys/pim6/inst/dom-{name}/ssm/range

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

pim6SsmRangeP Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Isolating a Router From an IPv6 PIM Perspective

Note: This example was added in Release 9.2(2).

CLI Commands

ipv6 pim isolate

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Gl	sys/pim6/inst/gl

pim6Gl Properties

The following table contains information about the pim6Gl properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
isolate	scalar:Bool	Isolate this router flag	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Router Isolated From an IPv6 PIM Perspective

Note: This example was added in Release 9.2(2).

CLI Commands

no ipv6 pim isolate

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Gl	sys/pim6/inst/gl

pim6Gl Properties

Property Name	Data Type	Description	Values
isolate	scalar:Bool	Isolate this router flag	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Join-Prune Messages to Inter-Packet Delay

Note: This example was added in Release 9.2(2).

CLI Commands

ipv6 pim jp-delay 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
jpDelay	rtdmc:JpDelayRange (scalar:Uint32)	Join-Prune message inter-packet delay	RANGE: [1 , 4294967295] DEFAULT: 100
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Join-Prune Messages to Inter-Packet Delay

Note: This example was added in Release 9.2(2).

CLI Commands

no ipv6 pim jp-delay 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
jpDelay	rtdmc:JpDelayRange (scalar:Uint32)	Join-Prune message inter-packet delay	RANGE: [1 , 4294967295] DEFAULT: 100
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Rate Limit for PIM Data Registers

Note: This example was added in Release 9.2(2).

CLI Commands

ipv6 pim register-rate-limit 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63
regRateLmt	rtdmc:RegRateRange (scalar:Uint32)	Register rate limit for data packets per second	RANGE: [0 , 65535] DEFAULT: 0

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Rate Limit for PIM Data Registers

Note: This example was added in Release 9.2(2).

CLI Commands

no ipv6 pim register-rate-limit 123

Note: The property information for this example was added in Release 9.3(3).

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-{name}

pim6Dom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63
regRateLmt	rtdmc:RegRateRange (scalar:Uint32)	Register rate limit for data packets per second	RANGE: [0 , 65535] DEFAULT: 0

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Disabling ECMP Multicast Load Splitting

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 multicast multipath none

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribConfig	sys/m6rib/inst/dom-default/config

m6ribDom Properties

The following table contains information about the m6ribDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribConfig Properties

The following table contains information about the m6ribConfig properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
mode	m6rib:MultipathMode (scalar:Enum8)	M6RIB ECMP Multicast load splitting	SELECTION: 1 - none 2 - s-g-hash DEFAULT: s-g-hash

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Disabling ECMP Multicast Load Splitting

Note: This example was added in Release 9.3(3).

CLI Commands

no ipv6 multicast multipath none

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribConfig	sys/m6rib/inst/dom-default/config

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribConfig Properties

Property Name	Data Type	Description	Values
mode	m6rib:MultipathMode (scalar:Enum8)	M6RIB ECMP Multicast load splitting	SELECTION: 1 - none 2 - s-g-hash DEFAULT: s-g-hash

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Resilient RPF Interface

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 multicast multipath resilient

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribConfig	sys/m6rib/inst/dom-default/config

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribConfig Properties

Property Name	Data Type	Description	Values
modeResilient	m6rib:ResilientType (scalar:Bool)	Multipath Resilient RPF interface mode	SELECTION: true or false DEFAULT: false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Resilient RPF Interface

Note: This example was added in Release 9.3(3).

CLI Commands

no ipv6 multicast multipath resilient

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribConfig	sys/m6rib/inst/dom-default/config

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribConfig Properties

Property Name	Data Type	Description	Values
modeResilient	m6rib:ResilientType (scalar:Bool)	Multipath Resilient RPF interface mode	SELECTION: true or false DEFAULT: false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Removing Routes when Restarting PIM6

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 pim flush-routes

Verifying a DME Configuration

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-default

pim6Dom Properties

Property Name	Data Type	Description	Values
flushRoutes	scalar:Bool	Flush Routes	SELECTION: true or false DEFAULT: false
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Config for Removing Routes when Restarting PIM6

Note: This example was added in Release 9.3(3).

CLI Commands

no ipv6 pim flush-routes

Verifying a DME Configuration

MO	DN
pim6Inst	sys/pim6/inst
pim6Dom	sys/pim6/inst/dom-default

pim6Dom Properties

Property Name	Data Type	Description	Values
flushRoutes	scalar:Bool	Flush Routes	SELECTION: true or false DEFAULT: false
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Bintrace

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 routing multicast trace enable

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribTrace	sys/m6rib/inst/dom-default/trace

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribTrace Properties

The following table contains information about the m6ribTrace properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
traceEnable	scalar:Bool	Configure multicast and enable bintrace	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Bintrace

Note: This example was added in Release 9.3(3).

CLI Commands

no ipv6 routing multicast trace enable

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribTrace	sys/m6rib/inst/dom-default/trace

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribTrace Properties

Property Name	Data Type	Description	Values
traceEnable	scalar:Bool	Configure multicast and enable bintrace	SELECTION: true or false

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the MFDM Buffer Route Size

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 routing multicast mfdm-buffer-route-count 86

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribConfig	sys/m6rib/inst/dom-default/config

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribConfig Properties

Property Name	Data Type	Description	Values
mfdmSize	m6rib:MfdmSize (scalar:Uint32)	Mfdm buffer route size	RANGE: [50 , 500] DEFAULT: 50

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the MFDM Buffer Route Size

Note: This example was added in Release 9.3(3).

CLI Commands

no ipv6 routing multicast mfdm-buffer-route-count 86

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribConfig	sys/m6rib/inst/dom-default/config

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribConfig Properties

Property Name	Data Type	Description	Values
mfdmSize	m6rib:MfdmSize (scalar:Uint32)	Mfdm buffer route size	RANGE: [50 , 500] DEFAULT: 50

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Number of Bintrace Entries

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 routing multicast trace entries 1

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribTrace	sys/m6rib/inst/dom-default/trace

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribTrace Properties

Property Name	Data Type	Description	Values
traceEntryCnt	m6rib:TraceCountType (scalar:Uint32)	Update number of bintrace entries	RANGE: [0 , 4294967295]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Number of Bintrace Records per Entry

Note: This example was added in Release 9.3(3).

CLI Commands

ipv6 routing multicast trace records 1

Verifying a DME Configuration

MO	DN
m6ribInst	sys/m6rib/inst
m6ribDom	sys/m6rib/inst/dom-default
m6ribTrace	sys/m6rib/inst/dom-default/trace

m6ribDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

m6ribTrace Properties

Property Name	Data Type	Description	Values
traceRecCnt	m6rib:TraceCountType (scalar:Uint32)	Update number of bintrace record per entry	RANGE: [0 , 4294967295]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html