Configuring PVLAN on a VLAN Interface

Configuring VLAN Additions to the Private VLAN List (SVI Secondary VLANs)

Configuring VLAN Additions to the Private VLAN List (SVI Secondary VLANs) 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "pvlanPrivateVlan": {
          "children": [
            {
              "pvlanSvi": {
                "attributes": {
                  "if": "vlan1",
                  "secondaryVlans": "1919"
                }
              }
            }
          ]
        }
      },
      {
        "interfaceEntity": {
          "children": [
            {
              "sviIf": {
                "attributes": {
                  "id": "vlan1"
                }
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <pvlan-items>
    <svi-items>
      <Svi-list>
        <if>vlan1</if>
        <secondaryVlans>1919</secondaryVlans>
      </Svi-list>
    </svi-items>
  </pvlan-items>
  <intf-items>
    <svi-items>
      <If-list>
        <id>vlan1</id>
      </If-list>
    </svi-items>
  </intf-items>
</System>

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

interface vlan 1
  private-vlan mapping add 1919


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
topSystem sys
pvlanPrivateVlan sys/pvlan
pvlanSvi sys/pvlan/svi-[vlan1]
interfaceEntity sys/intf
sviIf sys/intf/svi-[vlan1]


pvlanSvi Properties

The following table contains information about the pvlanSvi properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
ifnw:IfId
(base:IfIndex)		Interface id of port with PVLANMust match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
secondaryVlansl2:VlanBitmap
(base:BitArray)		Secondary VLANS of the PVLAN domain
ARRAY SIZE: 4096


sviIf Properties

The following table contains information about the sviIf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
idnw:IfId
(base:IfIndex)		An identifier .Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting VLAN Additions to the Private VLAN List (SVI Secondary VLANs)

Deleting VLAN Additions to the Private VLAN List (SVI Secondary VLANs) 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "pvlanPrivateVlan": {
          "children": [
            {
              "pvlanSvi": {
                "attributes": {
                  "if": "vlan1",
                  "status": "deleted"
                }
              }
            }
          ]
        }
      },
      {
        "interfaceEntity": {
          "children": [
            {
              "sviIf": {
                "attributes": {
                  "id": "vlan1"
                }
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <pvlan-items>
    <svi-items>
      <Svi-list nc:operation="delete">
        <if>vlan1</if>
      </Svi-list>
    </svi-items>
  </pvlan-items>
  <intf-items>
    <svi-items>
      <If-list>
        <id>vlan1</id>
      </If-list>
    </svi-items>
  </intf-items>
</System>

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

interface vlan 1
  no private-vlan mapping add 1919


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
topSystem sys
pvlanPrivateVlan sys/pvlan
pvlanSvi sys/pvlan/svi-[vlan1]
interfaceEntity sys/intf
sviIf sys/intf/svi-[vlan1]


pvlanSvi Properties

The following table contains information about the pvlanSvi properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
ifnw:IfId
(base:IfIndex)		Interface id of port with PVLANMust match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
statusmo:ModificationStatus
(scalar:Bitmask32)		The upgrade status. This property is for internal use only.SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced


sviIf Properties

The following table contains information about the sviIf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
idnw:IfId
(base:IfIndex)		An identifier .Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring VLAN Removal From the Current List (SVI Secondary VLANs)

Configuring VLAN Removal From the Current List (SVI Secondary VLANs) 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "pvlanPrivateVlan": {
          "children": [
            {
              "pvlanSvi": {
                "attributes": {
                  "if": "vlan1",
                  "secondaryVlans": ""
                }
              }
            }
          ]
        }
      },
      {
        "interfaceEntity": {
          "children": [
            {
              "sviIf": {
                "attributes": {
                  "id": "vlan1"
                }
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <pvlan-items>
    <svi-items>
      <Svi-list>
        <if>vlan1</if>
        <secondaryVlans></secondaryVlans>
      </Svi-list>
    </svi-items>
  </pvlan-items>
  <intf-items>
    <svi-items>
      <If-list>
        <id>vlan1</id>
      </If-list>
    </svi-items>
  </intf-items>
</System>

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

interface vlan 1
  private-vlan mapping remove 1919


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
topSystem sys
pvlanPrivateVlan sys/pvlan
pvlanSvi sys/pvlan/svi-[vlan1]
interfaceEntity sys/intf
sviIf sys/intf/svi-[vlan1]


pvlanSvi Properties

The following table contains information about the pvlanSvi properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
ifnw:IfId
(base:IfIndex)		Interface id of port with PVLANMust match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
secondaryVlansl2:VlanBitmap
(base:BitArray)		Secondary VLANS of the PVLAN domain
ARRAY SIZE: 4096


sviIf Properties

The following table contains information about the sviIf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
idnw:IfId
(base:IfIndex)		An identifier .Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting VLAN Removal From the Current List (SVI Secondary VLANs)

Deleting VLAN Removal From the Current List (SVI Secondary VLANs) 

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "pvlanPrivateVlan": {
          "children": [
            {
              "pvlanSvi": {
                "attributes": {
                  "if": "vlan1",
                  "status": "deleted"
                }
              }
            }
          ]
        }
      },
      {
        "interfaceEntity": {
          "children": [
            {
              "sviIf": {
                "attributes": {
                  "id": "vlan1"
                }
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <pvlan-items>
    <svi-items>
      <Svi-list nc:operation="delete">
        <if>vlan1</if>
      </Svi-list>
    </svi-items>
  </pvlan-items>
  <intf-items>
    <svi-items>
      <If-list>
        <id>vlan1</id>
      </If-list>
    </svi-items>
  </intf-items>
</System>

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

interface vlan 1
  no private-vlan mapping


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
topSystem sys
pvlanPrivateVlan sys/pvlan
pvlanSvi sys/pvlan/svi-[vlan1]
interfaceEntity sys/intf
sviIf sys/intf/svi-[vlan1]


pvlanSvi Properties

The following table contains information about the pvlanSvi properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
ifnw:IfId
(base:IfIndex)		Interface id of port with PVLANMust match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
statusmo:ModificationStatus
(scalar:Bitmask32)		The upgrade status. This property is for internal use only.SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced


sviIf Properties

The following table contains information about the sviIf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
idnw:IfId
(base:IfIndex)		An identifier .Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html