Cisco Nexus 3000 and 9000 Series NX-API REST SDK API, Release 9.3(x)
Loading...
Configuring Software Replication of PIM ASM Leak Packets
DME
YANG
Copy
POST http://<mgmt0_IP>/api/mo/sys/mcastfwdv6/inst.json

{
  "mcastfwdv6Inst": {
    "children": [
      {
        "mcastfwdv6SwRepli": {
          "attributes": {
            "type": "swasm"
}}}]}}

Response
{
    imdata:[]
}

Copy
<System>
  <mcastfwdv6-items>
    <inst-items>
      <swrepli-items>
        <type>swasm</type>
      </swrepli-items>
    </inst-items>
  </mcastfwdv6-items>
</System>

Configuring Software Replication of PIM ASM Leak Packets

Configuring Software Replication of PIM ASM Leak Packets

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ipv6 routing multicast software-replicate


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
mcastfwdv6Inst sys/mcastfwdv6/inst
mcastfwdv6SwRepli sys/mcastfwdv6/inst/swrepli


mcastfwdv6SwRepli Properties

The following table contains information about the mcastfwdv6SwRepli properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
typemcastfwdv6:SwRep
(scalar:Enum8)		Enable software replication of PIM ASM leak packets and incoming interfaceSELECTION:
0 - none
1 - swasm


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Software Replication of PIM ASM Leak Packets

Deleting Software Replication of PIM ASM Leak Packets

Note: This example was added in Release 9.3(5).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no ipv6 routing multicast software-replicate


Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
mcastfwdv6Inst sys/mcastfwdv6/inst
mcastfwdv6SwRepli sys/mcastfwdv6/inst/swrepli


mcastfwdv6SwRepli Properties

The following table contains information about the mcastfwdv6SwRepli properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
statusmo:ModificationStatus
(scalar:Bitmask32)		The upgrade status. This property is for internal use only.SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Next