Configuring the Baseboard Management Controller

Configuring a BMC IP Address (IPv4)

Configuring a BMC IP Address (IPv4)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "wedgeBmc": {
          "attributes": {
            "ipAddr": "1.2.3.4",
            "ipEnabled": "yes"
}}}]}}

{
    imdata:[]
}

<System>
  <wedge-items>
    <ipAddr>1.2.3.4</ipAddr>
    <ipEnabled>yes</ipEnabled>
  </wedge-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

wedge bmc ip-addr 1.2.3.4

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
topSystem	sys
wedgeBmc	sys/wedge

wedgeBmc Properties

The following table contains information about the wedgeBmc properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
ipAddr	address:Ip	Wedge BMC IP Address	Value must match ipv4 or ipv6 known format
ipEnabled	wedge:BmcIPEnabled (scalar:Enum8)	BMC Ip Enabled Status	SELECTION: 0 - no 1 - yes DEFAULT: no

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a BMC IP Address (IPv4)

Deleting a BMC IP Address (IPv4)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "wedgeBmc": {
          "attributes": {
            "ipAddr": "1.2.3.4",
            "ipEnabled": "no"
}}}]}}

{
    imdata:[]
}

<System>
  <wedge-items>
    <ipAddr>1.2.3.4</ipAddr>
    <ipEnabled>no</ipEnabled>
  </wedge-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

no wedge bmc ip-addr 1.2.3.4

Verifying a DME Configuration

MO	DN
topSystem	sys
wedgeBmc	sys/wedge

wedgeBmc Properties

Property Name	Data Type	Description	Values
ipAddr	address:Ip	Wedge BMC IP Address	Value must match ipv4 or ipv6 known format
ipEnabled	wedge:BmcIPEnabled (scalar:Enum8)	BMC Ip Enabled Status	SELECTION: 0 - no 1 - yes DEFAULT: no

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a BMC IP Address (IPv6)

Configuring a BMC IP Address (IPv6)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "wedgeBmc": {
          "attributes": {
            "ipAddr": "1:2::3:4",
            "ipEnabled": "yes"
}}}]}}

{
    imdata:[]
}

<System>
  <wedge-items>
    <ipAddr>1:2::3:4</ipAddr>
    <ipEnabled>yes</ipEnabled>
  </wedge-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

wedge bmc ip-addr 1:2::3:4

Verifying a DME Configuration

MO	DN
topSystem	sys
wedgeBmc	sys/wedge

wedgeBmc Properties

Property Name	Data Type	Description	Values
ipAddr	address:Ip	Wedge BMC IP Address	Value must match ipv4 or ipv6 known format
ipEnabled	wedge:BmcIPEnabled (scalar:Enum8)	BMC Ip Enabled Status	SELECTION: 0 - no 1 - yes DEFAULT: no

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a BMC IP Address (IPv6)

Deleting a BMC IP Address (IPv6)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "wedgeBmc": {
          "attributes": {
            "ipAddr": "1:2::3:4",
            "ipEnabled": "no"
}}}]}}

{
    imdata:[]
}

<System>
  <wedge-items>
    <ipAddr>1:2::3:4</ipAddr>
    <ipEnabled>no</ipEnabled>
  </wedge-items>
</System>

Note: This example was added in Release 9.3(1).

CLI Commands

no wedge bmc ip-addr 1:2::3:4

Verifying a DME Configuration

MO	DN
topSystem	sys
wedgeBmc	sys/wedge

wedgeBmc Properties

Property Name	Data Type	Description	Values
ipAddr	address:Ip	Wedge BMC IP Address	Value must match ipv4 or ipv6 known format
ipEnabled	wedge:BmcIPEnabled (scalar:Enum8)	BMC Ip Enabled Status	SELECTION: 0 - no 1 - yes DEFAULT: no

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html