Enabling and Disabling PIM

Enabling PIM

Enabling PIM

POST http://<IP_Address>/api/mo/sys/fm/pim.json

{
  "fmPim": {
    "attributes": {
      "adminSt": "enabled"
    }
  }
}

{
    "imdata": []
}

<System>
 <fm-items>
    <pim-items>
      <adminSt>enabled</adminSt>
    </pim-items>
  </fm-items>
</System>

This example enables PIM. By default, PIM is disabled.

CLI Command

The CLI command below is the equivalent to the payload example displayed in the pane on the right.

feature pim

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
fmPim	sys/fm/pim

fmPim Properties

The following table contains information about the fmPim properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
adminSt	fm:AdminState (scalar:Enum8)	Admin status	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling PIM

Disabling PIM

POST http://<IP_Address>/api/mo/sys/fm/pim.json

{
  "fmPim": {
    "attributes": {
      "adminSt": "disabled"
    }
  }
}

{
    "imdata": []
}

<System>
  <fm-items>
    <pim-items>
      <adminSt>disabled</adminSt>
    </pim-items>
  </fm-items>
</System>

This example disables PIM.