Support PIP (Portable IP) routes with Gateway IPs in EVPN

For more information, see the Cisco Nexus 9000 Series NX-OS SRv6 Configuration Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-installation-and-configuration-guides-list.html/

Configuring Next-Hop Address as Gateway IP

Configuring Next-Hop Address as Gateway IP

POST http://<mgmt0_IP>/api/mo/sys/rpm.json

{
  "rpmEntity": {
    "children": [
      {
        "rtmapRule": {
          "attributes": {
            "name": "Map_1"
          },
          "children": [
            {
              "rtmapEntry": {
                "attributes": {
                  "action": "permit",
                  "order": "10"
                },
                "children": [
                  {
                    "rtmapSetEvpn": {
                      "attributes": {
                        "gwType": "nexthop"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <rpm-items>
    <rtmap-items>
      <Rule-list>
        <name>Map_1</name>
        <ent-items>
          <Entry-list>
            <order>10</order>
            <action>permit</action>
            <sevpn-items>
              <gwType>nexthop</gwType>
            </sevpn-items>
          </Entry-list>
        </ent-items>
      </Rule-list>
    </rtmap-items>
  </rpm-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

route-map Map_1
set evpn gateway-ip use-nexthop

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
rpmEntity	sys/rpm
rtmapRule	sys/rpm/rtmap-[Map_1]
rtmapEntry	sys/rpm/rtmap-[Map_1]/ent-10
rtmapSetEvpn	sys/rpm/rtmap-[Map_1]/ent-10/sevpn

rtmapRule Properties

The following table contains information about the rtmapRule properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	RANGE: [0 , 63]

rtmapEntry Properties

The following table contains information about the rtmapEntry properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [0 , 65535]

rtmapSetEvpn Properties

The following table contains information about the rtmapSetEvpn properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
gwType	rtmap:GatewayT (scalar:Enum8)	EVPN Gateway Address Type	SELECTION: 0 - ip-address 1 - nexthop DEFAULT: ip-address

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Next-Hop Address as Gateway IP

Deleting Next-Hop Address as Gateway IP

POST http://<mgmt0_IP>/api/mo/sys/rpm.json

{
  "rpmEntity": {
    "children": [
      {
        "rtmapRule": {
          "attributes": {
            "name": "Map_1"
          },
          "children": [
            {
              "rtmapEntry": {
                "attributes": {
                  "action": "permit",
                  "order": "10"
                },
                "children": [
                  {
                    "rtmapSetEvpn": {
                      "attributes": {
                        "status": "deleted"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <rpm-items>
    <rtmap-items>
      <Rule-list>
        <name>Map_1</name>
        <ent-items>
          <Entry-list>
            <order>10</order>
            <action>permit</action>
            <sevpn-items nc:operation="delete">
            </sevpn-items>
          </Entry-list>
        </ent-items>
      </Rule-list>
    </rtmap-items>
  </rpm-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

route-map Map_1
no set evpn gateway-ip use-nexthop

Verifying a DME Configuration

MO	DN
rpmEntity	sys/rpm
rtmapRule	sys/rpm/rtmap-[Map_1]
rtmapEntry	sys/rpm/rtmap-[Map_1]/ent-10
rtmapSetEvpn	sys/rpm/rtmap-[Map_1]/ent-10/sevpn

rtmapRule Properties

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	RANGE: [0 , 63]

rtmapEntry Properties

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [0 , 65535]

rtmapSetEvpn Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	The upgrade status. This property is for internal use only.	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Forward Packets Over Multipath Paths (L2VPN EVPN AF)

Configuring Forward Packets Over Multipath Paths (L2VPN EVPN AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "maxLclEcmp": "32",
                        "type": "l2vpn-evpn"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>l2vpn-evpn</type>
              <maxLclEcmp>32</maxLclEcmp>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

router bgp 100
address-family l2vpn evpn
maximum-paths local 32

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpDomAf	sys/bgp/inst/dom-default/af-[l2vpn-evpn]

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpDomAf Properties

The following table contains information about the bgpDomAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
maxLclEcmp	bgp:MaxEcmp (scalar:UByte)	Maximum number of equal-cost multipath for local paths	RANGE: [1 , 64] DEFAULT: 1
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Forward Packets Over Multipath Paths (L2VPN EVPN AF)

Deleting Forward Packets Over Multipath Paths (L2VPN EVPN AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "maxLclEcmp": "1",
                        "type": "l2vpn-evpn"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>l2vpn-evpn</type>
              <maxLclEcmp>1</maxLclEcmp>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

router bgp 100
address-family l2vpn evpn
no maximum-paths local 32

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-default
bgpDomAf	sys/bgp/inst/dom-default/af-[l2vpn-evpn]

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpDomAf Properties

Property Name	Data Type	Description	Values
maxLclEcmp	bgp:MaxEcmp (scalar:UByte)	Maximum number of equal-cost multipath for local paths	RANGE: [1 , 64] DEFAULT: 1
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Forward Packets Over Multipath Paths (IPv4 Unicast AF)

Configuring Forward Packets Over Multipath Paths (IPv4 Unicast AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "VRF_1"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "maxLclEcmp": "28",
                        "type": "ipv4-ucast"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>VRF_1</name>
          <af-items>
            <DomAf-list>
              <type>ipv4-ucast</type>
              <maxLclEcmp>28</maxLclEcmp>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

router bgp 100
  vrf VRF_1
   address-family ipv4 unicast
    maximum-paths local 28

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-VRF_1
bgpDomAf	sys/bgp/inst/dom-VRF_1/af-[ipv4-ucast]

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpDomAf Properties

Property Name	Data Type	Description	Values
maxLclEcmp	bgp:MaxEcmp (scalar:UByte)	Maximum number of equal-cost multipath for local paths	RANGE: [1 , 64] DEFAULT: 1
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Forward Packets Over Multipath Paths (IPv4 Unicast AF)

Deleting Forward Packets Over Multipath Paths (IPv4 Unicast AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "VRF_1"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "maxLclEcmp": "1",
                        "type": "ipv4-ucast"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>VRF_1</name>
          <af-items>
            <DomAf-list>
              <type>ipv4-ucast</type>
              <maxLclEcmp>1</maxLclEcmp>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

router bgp 100
  vrf VRF_1
   address-family ipv4 unicast
    no maximum-paths local 28

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-VRF_1
bgpDomAf	sys/bgp/inst/dom-VRF_1/af-[ipv4-ucast]

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpDomAf Properties

Property Name	Data Type	Description	Values
maxLclEcmp	bgp:MaxEcmp (scalar:UByte)	Maximum number of equal-cost multipath for local paths	RANGE: [1 , 64] DEFAULT: 1
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Forward Packets Over Multipath Paths (IPv6 Unicast AF)

Configuring Forward Packets Over Multipath Paths (IPv6 Unicast AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "VRF_1"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "maxLclEcmp": "15",
                        "type": "ipv6-ucast"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>VRF_1</name>
          <af-items>
            <DomAf-list>
              <type>ipv6-ucast</type>
              <maxLclEcmp>15</maxLclEcmp>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

router bgp 100
  vrf VRF_1
   address-family ipv6 unicast
    maximum-paths local 15

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-VRF_1
bgpDomAf	sys/bgp/inst/dom-VRF_1/af-[ipv6-ucast]

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpDomAf Properties

Property Name	Data Type	Description	Values
maxLclEcmp	bgp:MaxEcmp (scalar:UByte)	Maximum number of equal-cost multipath for local paths	RANGE: [1 , 64] DEFAULT: 1
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Forward Packets Over Multipath Paths (IPv6 Unicast AF)

Deleting Forward Packets Over Multipath Paths (IPv6 Unicast AF)

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "VRF_1"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "maxLclEcmp": "1",
                        "type": "ipv6-ucast"
}}}]}}]}}]}}

{
    imdata:[]
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>VRF_1</name>
          <af-items>
            <DomAf-list>
              <type>ipv6-ucast</type>
              <maxLclEcmp>1</maxLclEcmp>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 9.3(5).

CLI Commands

router bgp 100
  vrf VRF_1
   address-family ipv6 unicast
    no maximum-paths local 15

Verifying a DME Configuration

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-VRF_1
bgpDomAf	sys/bgp/inst/dom-VRF_1/af-[ipv6-ucast]

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpDomAf Properties

Property Name	Data Type	Description	Values
maxLclEcmp	bgp:MaxEcmp (scalar:UByte)	Maximum number of equal-cost multipath for local paths	RANGE: [1 , 64] DEFAULT: 1
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html