Clearing IPv6 Statistics

Clearing Global Traffic Statistics

Clearing Global Traffic Statistics

POST http://<mgmt0_IP>/api/mo/sys/action.json

      
                   {
                         "actionLSubj": {
                             "attributes": {
                                 "dn": "sys/action/lsubj-[sys/ipv6/inst]"

                                   }
                                   "children" : [{
                                       "ipv6InstClearTrafficStatLTask" : {
                                           "attributes" : {
                                               "adminSt" : "start",
                                "dn" : "sys/action/lsubj-[sys/ipv6/inst]/ipv6InstClearTrafficStatLTask",
                                "freq": "one-shot"
                                }

                                         }
                                   }]
                         }
                   }

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

clear ipv6 traffic

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Clearing Interface Traffic Statistics

Clearing Interface Traffic Statistics

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
      "actionLSubj": {
          "attributes": {
              "dn": "sys/action/lsubj-[sys/ipv6/inst]"
                }
            "children" : [{
         "ipv6InstClearIntfStatLTask" : {
             "attributes" : {
                 "adminSt" : "start",
                 "dn" : "sys/action/lsubj-[sys/ipv6/inst]/ipv6InstClearIntfStatLTask",
                 "interface" : "eth1/1",
                 "freq": "one-shot"
                         }
                     }
                }]
              }
        }

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

clear ipv6 interface statistics ethernet 1/1

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

actionLSubj Properties

The following table contains information about the actionLSubj properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html