Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Applying an AS-PATH Filter List to Incoming Routes

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
  "topSystem": {
    "children": [
      {
        "rpmEntity": {
          "children": [
            {
              "rtlistRule": {
                "attributes": {
                  "name": "List_A"
                },
                "children": [
                  {
                    "rtlistEntry": {
                      "attributes": {
                        "action": "permit",
                        "order": "10",
                        "regex": "1"
}}}]}}]}},{
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "123"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": ""
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "inheritContPeerPolicyCtrl": "",
                                    "type": "ipv6-ucast"
                                  },
                                  "children": [
                                    {
                                      "bgpFltrCtrlP": {
                                        "attributes": {
                                          "direction": "in",
                                          "list": "List_A"
}}}]}}]}}]}}]}}]}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <rpm-items>
    <accesslist-items>
      <Rule-list>
        <name>List_A</name>
        <ent-items>
          <Entry-list>
            <order>10</order>
            <action>permit</action>
            <regex>1</regex>
          </Entry-list>
        </ent-items>
      </Rule-list>
    </accesslist-items>
  </rpm-items>
  <bgp-items>
    <inst-items>
      <asn>123</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-ucast</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <fltrctrl-items>
                    <FltrCtrlP-list>
                      <direction>in</direction>
                      <list>List_A</list>
                    </FltrCtrlP-list>
                  </fltrctrl-items>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Configuring an IPv6 Unicast Subaddress Family Under a BGP Neighbor (IP Address)

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip as-path access-list List_A seq 10 permit 1
router bgp 123
neighbor 1.2.3.4
address-family ipv6 unicast
filter-list List_A in

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
topSystem	sys
rpmEntity	sys/rpm
rtlistRule	sys/rpm/accesslist-{[name]}
rtlistEntry	sys/rpm/accesslist-{[name]}/ent-{order}
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-{name}
bgpPeer	sys/bgp/inst/dom-{name}/peer-{[addr]}
bgpPeerAf	sys/bgp/inst/dom-{name}/peerif-{[id]}/af-{[type]}
bgpFltrCtrlP	sys/bgp/inst/dom-{name}/policycont-{name}/fltrctrl-{direction}

rtlistRule Properties

The following table contains information about the rtlistRule properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	MAX SIZE: 64

rtlistEntry Properties

The following table contains information about the rtlistEntry properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [1 , 4294967294]
regex	string:Basic	Regular Expression	A sequence of characters

bgpInst Properties

The following table contains information about the bgpInst properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

The following table contains information about the bgpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeer Properties

The following table contains information about the bgpPeer properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
addr	address:Ip	Peer address	Value must match ipv4 or ipv6 known format
inheritContPeerCtrl	bgp:InheritContPeerCtrlType (scalar:Bitmask64)	Inherit control of peer parameters	SELECTION: 1 - shutdown 2 - remote-as 4 - conn-mode 8 - bfd 16 - dis-conn-check 32 - cap-neg-off 64 - description 128 - timer 256 - password 512 - source-interface 1024 - ttl 2048 - ipv4-ucast 4096 - ipv4-mcast 8192 - epe 16384 - ipv6-ucast 32768 - ipv6-mcast 65536 - no-dyn-cap 131072 - local-as 262144 - remove-private-as 524288 - ipv4-lucast 1048576 - ipv6-lucast 2097152 - lnkstate 4194304 - log-nbr-chgs 8388608 - peer-type 16777216 - ipv4-mvpn 33554432 - ipv6-mvpn 67108864 - low-memory-exempt 134217728 - cap-suppr-4-byte-as 268435456 - l2vpn-evpn 536870912 - aff-grp 2147483648 - vpnv4-ucast 8589934592 - vpnv6-ucast 34359738368 - security-hops 137438953472 - bmp-activate-server-1 274877906944 - bmp-activate-server-2 549755813888 - dscp 1099511627776 - gshut-activate 2199023255552 - ipv4-mdt 4398046511104 - mhop-intvl 8796093022208 - mhop-auth

bgpPeerAf Properties

The following table contains information about the bgpPeerAf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all 1073741824 - import-vpn-unicast 2147483648 - import-l2vpn-evpn
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

bgpFltrCtrlP Properties

The following table contains information about the bgpFltrCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

CLI Commands

ip as-path access-list List_A seq 10 permit 1
router bgp 123
neighbor 1.2.3.4
address-family ipv6 unicast
filter-list List_A out

Note: The property information for this example was added in Release 9.3(3).

MO	DN
topSystem	sys
rpmEntity	sys/rpm
rtlistRule	sys/rpm/accesslist-{[name]}
rtlistEntry	sys/rpm/accesslist-{[name]}/ent-{order}
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-{name}
bgpPeer	sys/bgp/inst/dom-{name}/peer-{[addr]}
bgpPeerAf	sys/bgp/inst/dom-{name}/peerif-{[id]}/af-{[type]}
bgpFltrCtrlP	sys/bgp/inst/dom-{name}/policycont-{name}/fltrctrl-{direction}

rtlistRule Properties

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	MAX SIZE: 64

rtlistEntry Properties

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [1 , 4294967294]
regex	string:Basic	Regular Expression	A sequence of characters

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeer Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Peer address	Value must match ipv4 or ipv6 known format
inheritContPeerCtrl	bgp:InheritContPeerCtrlType (scalar:Bitmask64)	Inherit control of peer parameters	SELECTION: 1 - shutdown 2 - remote-as 4 - conn-mode 8 - bfd 16 - dis-conn-check 32 - cap-neg-off 64 - description 128 - timer 256 - password 512 - source-interface 1024 - ttl 2048 - ipv4-ucast 4096 - ipv4-mcast 8192 - epe 16384 - ipv6-ucast 32768 - ipv6-mcast 65536 - no-dyn-cap 131072 - local-as 262144 - remove-private-as 524288 - ipv4-lucast 1048576 - ipv6-lucast 2097152 - lnkstate 4194304 - log-nbr-chgs 8388608 - peer-type 16777216 - ipv4-mvpn 33554432 - ipv6-mvpn 67108864 - low-memory-exempt 134217728 - cap-suppr-4-byte-as 268435456 - l2vpn-evpn 536870912 - aff-grp 2147483648 - vpnv4-ucast 8589934592 - vpnv6-ucast 34359738368 - security-hops 137438953472 - bmp-activate-server-1 274877906944 - bmp-activate-server-2 549755813888 - dscp 1099511627776 - gshut-activate 2199023255552 - ipv4-mdt 4398046511104 - mhop-intvl 8796093022208 - mhop-auth

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all 1073741824 - import-vpn-unicast 2147483648 - import-l2vpn-evpn
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

bgpFltrCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Prefix List to Incoming Routes

CLI Commands

ip prefix-list List_1 seq 10 permit 4.3.2.1/3
router bgp 123
neighbor 1.2.3.4
address-family ipv6 unicast
prefix-list List_1 in

Note: The property information for this example was added in Release 9.3(3).

MO	DN
topSystem	sys
rpmEntity	sys/rpm
rtpfxRuleV4	sys/rpm/pfxlistv4-{[name]}
rtpfxEntry	sys/rpm/pfxlistv6-{[name]}/ent-{order}
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-{name}
bgpPeer	sys/bgp/inst/dom-{name}/peer-{[addr]}
bgpPeerAf	sys/bgp/inst/dom-{name}/peerif-{[id]}/af-{[type]}
bgpPfxCtrlP	sys/bgp/inst/dom-{name}/policycont-{name}/pfxctrl-{direction}

rtpfxRuleV4 Properties

The following table contains information about the rtpfxRuleV4 properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	MAX SIZE: 64

rtpfxEntry Properties

The following table contains information about the rtpfxEntry properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
criteria	rtpfx:Criteria (scalar:Enum8)	Criteria	SELECTION: 0 - exact 1 - inexact DEFAULT: exact
fromPfxLen	l3:IpPfxLen (scalar:Uint16)	The start of a range used to describe the prefix length if the criteria is not an exact match.	RANGE: [0 , 128] DEFAULT: 0
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [1 , 4294967294]
pfx	address:Ip	Specifies the OSPF route prefix.	Value must match ipv4 or ipv6 known format
toPfxLen	l3:IpPfxLen (scalar:Uint16)	The end of a range to describe the prefix length if the criteria is not an exact match.	RANGE: [0 , 128] DEFAULT: 0

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeer Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Peer address	Value must match ipv4 or ipv6 known format
inheritContPeerCtrl	bgp:InheritContPeerCtrlType (scalar:Bitmask64)	Inherit control of peer parameters	SELECTION: 1 - shutdown 2 - remote-as 4 - conn-mode 8 - bfd 16 - dis-conn-check 32 - cap-neg-off 64 - description 128 - timer 256 - password 512 - source-interface 1024 - ttl 2048 - ipv4-ucast 4096 - ipv4-mcast 8192 - epe 16384 - ipv6-ucast 32768 - ipv6-mcast 65536 - no-dyn-cap 131072 - local-as 262144 - remove-private-as 524288 - ipv4-lucast 1048576 - ipv6-lucast 2097152 - lnkstate 4194304 - log-nbr-chgs 8388608 - peer-type 16777216 - ipv4-mvpn 33554432 - ipv6-mvpn 67108864 - low-memory-exempt 134217728 - cap-suppr-4-byte-as 268435456 - l2vpn-evpn 536870912 - aff-grp 2147483648 - vpnv4-ucast 8589934592 - vpnv6-ucast 34359738368 - security-hops 137438953472 - bmp-activate-server-1 274877906944 - bmp-activate-server-2 549755813888 - dscp 1099511627776 - gshut-activate 2199023255552 - ipv4-mdt 4398046511104 - mhop-intvl 8796093022208 - mhop-auth

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all 1073741824 - import-vpn-unicast 2147483648 - import-l2vpn-evpn
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

bgpPfxCtrlP Properties

The following table contains information about the bgpPfxCtrlP properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Prefix List to Outgoing Routes

CLI Commands

ip prefix-list List_1 seq 10 permit 4.3.2.1/3
router bgp 123
neighbor 1.2.3.4
address-family ipv6 unicast
prefix-list List_1 out

Note: The property information for this example was added in Release 9.3(3).

MO	DN
topSystem	sys
rpmEntity	sys/rpm
rtpfxRuleV4	sys/rpm/pfxlistv4-{[name]}
rtpfxEntry	sys/rpm/pfxlistv6-{[name]}/ent-{order}
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-{name}
bgpPeer	sys/bgp/inst/dom-{name}/peer-{[addr]}
bgpPeerAf	sys/bgp/inst/dom-{name}/peerif-{[id]}/af-{[type]}
bgpPfxCtrlP	sys/bgp/inst/dom-{name}/policycont-{name}/pfxctrl-{direction}

rtpfxRuleV4 Properties

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	MAX SIZE: 64

rtpfxEntry Properties

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
criteria	rtpfx:Criteria (scalar:Enum8)	Criteria	SELECTION: 0 - exact 1 - inexact DEFAULT: exact
fromPfxLen	l3:IpPfxLen (scalar:Uint16)	The start of a range used to describe the prefix length if the criteria is not an exact match.	RANGE: [0 , 128] DEFAULT: 0
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [1 , 4294967294]
pfx	address:Ip	Specifies the OSPF route prefix.	Value must match ipv4 or ipv6 known format
toPfxLen	l3:IpPfxLen (scalar:Uint16)	The end of a range to describe the prefix length if the criteria is not an exact match.	RANGE: [0 , 128] DEFAULT: 0

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeer Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Peer address	Value must match ipv4 or ipv6 known format
inheritContPeerCtrl	bgp:InheritContPeerCtrlType (scalar:Bitmask64)	Inherit control of peer parameters	SELECTION: 1 - shutdown 2 - remote-as 4 - conn-mode 8 - bfd 16 - dis-conn-check 32 - cap-neg-off 64 - description 128 - timer 256 - password 512 - source-interface 1024 - ttl 2048 - ipv4-ucast 4096 - ipv4-mcast 8192 - epe 16384 - ipv6-ucast 32768 - ipv6-mcast 65536 - no-dyn-cap 131072 - local-as 262144 - remove-private-as 524288 - ipv4-lucast 1048576 - ipv6-lucast 2097152 - lnkstate 4194304 - log-nbr-chgs 8388608 - peer-type 16777216 - ipv4-mvpn 33554432 - ipv6-mvpn 67108864 - low-memory-exempt 134217728 - cap-suppr-4-byte-as 268435456 - l2vpn-evpn 536870912 - aff-grp 2147483648 - vpnv4-ucast 8589934592 - vpnv6-ucast 34359738368 - security-hops 137438953472 - bmp-activate-server-1 274877906944 - bmp-activate-server-2 549755813888 - dscp 1099511627776 - gshut-activate 2199023255552 - ipv4-mdt 4398046511104 - mhop-intvl 8796093022208 - mhop-auth

bgpPeerAf Properties

Property Name	Data Type	Description	Values
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all 1073741824 - import-vpn-unicast 2147483648 - import-l2vpn-evpn
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

bgpPfxCtrlP Properties

Property Name	Data Type	Description	Values
direction	bgp:RtCtrlDir (scalar:Enum8)	Direction: Specifies whether to apply this policy in the incoming or outgoing direction.	SELECTION: 1 - in 2 - out DEFAULT: in
list	string:Basic	Name of list to control the route distribution	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Address as Nexthop for All Routes

Note: This example was added in Release 9.2(3).

CLI Commands

router bgp 100
neighbor 1.2.3.4
address-family ipv6 unicast
next-hop-self all

Note: The property information for this example was added in Release 9.3(3).

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-{name}
bgpPeer	sys/bgp/inst/dom-{name}/peer-{[addr]}
bgpPeerAf	sys/bgp/inst/dom-{name}/peerif-{[id]}/af-{[type]}

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeer Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Peer address	Value must match ipv4 or ipv6 known format
inheritContPeerCtrl	bgp:InheritContPeerCtrlType (scalar:Bitmask64)	Inherit control of peer parameters	SELECTION: 1 - shutdown 2 - remote-as 4 - conn-mode 8 - bfd 16 - dis-conn-check 32 - cap-neg-off 64 - description 128 - timer 256 - password 512 - source-interface 1024 - ttl 2048 - ipv4-ucast 4096 - ipv4-mcast 8192 - epe 16384 - ipv6-ucast 32768 - ipv6-mcast 65536 - no-dyn-cap 131072 - local-as 262144 - remove-private-as 524288 - ipv4-lucast 1048576 - ipv6-lucast 2097152 - lnkstate 4194304 - log-nbr-chgs 8388608 - peer-type 16777216 - ipv4-mvpn 33554432 - ipv6-mvpn 67108864 - low-memory-exempt 134217728 - cap-suppr-4-byte-as 268435456 - l2vpn-evpn 536870912 - aff-grp 2147483648 - vpnv4-ucast 8589934592 - vpnv6-ucast 34359738368 - security-hops 137438953472 - bmp-activate-server-1 274877906944 - bmp-activate-server-2 549755813888 - dscp 1099511627776 - gshut-activate 2199023255552 - ipv4-mdt 4398046511104 - mhop-intvl 8796093022208 - mhop-auth

bgpPeerAf Properties

Property Name	Data Type	Description	Values
ctrl	bgp:PeerAfControl (scalar:Bitmask16)	Peer address-family control	SELECTION: 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - allow-self-as 64 - default-originate 128 - advertisement-interval 256 - suppress-inactive 512 - nh-self-all
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all 1073741824 - import-vpn-unicast 2147483648 - import-l2vpn-evpn
nhSelfAll	scalar:Bool	Set address as next-hop for all routes	SELECTION: true or false
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Address as Nexthop for All Routes

Note: This example was added in Release 9.2(3).

CLI Commands

router bgp 100
neighbor 1.2.3.4
address-family ipv6 unicast
no next-hop-self all

Note: The property information for this example was added in Release 9.3(3).

MO	DN
bgpEntity	sys/bgp
bgpInst	sys/bgp/inst
bgpDom	sys/bgp/inst/dom-{name}
bgpPeer	sys/bgp/inst/dom-{name}/peer-{[addr]}
bgpPeerAf	sys/bgp/inst/dom-{name}/peerif-{[id]}/af-{[type]}

bgpInst Properties

Property Name	Data Type	Description	Values
asn	bgp:AsnNum (string:Basic)	Autonomous system number	A sequence of characters

bgpDom Properties

Property Name	Data Type	Description	Values
name	naming:Name256 (string:Basic)	The name of the object.	MAX SIZE: 63

bgpPeer Properties

Property Name	Data Type	Description	Values
addr	address:Ip	Peer address	Value must match ipv4 or ipv6 known format
inheritContPeerCtrl	bgp:InheritContPeerCtrlType (scalar:Bitmask64)	Inherit control of peer parameters	SELECTION: 1 - shutdown 2 - remote-as 4 - conn-mode 8 - bfd 16 - dis-conn-check 32 - cap-neg-off 64 - description 128 - timer 256 - password 512 - source-interface 1024 - ttl 2048 - ipv4-ucast 4096 - ipv4-mcast 8192 - epe 16384 - ipv6-ucast 32768 - ipv6-mcast 65536 - no-dyn-cap 131072 - local-as 262144 - remove-private-as 524288 - ipv4-lucast 1048576 - ipv6-lucast 2097152 - lnkstate 4194304 - log-nbr-chgs 8388608 - peer-type 16777216 - ipv4-mvpn 33554432 - ipv6-mvpn 67108864 - low-memory-exempt 134217728 - cap-suppr-4-byte-as 268435456 - l2vpn-evpn 536870912 - aff-grp 2147483648 - vpnv4-ucast 8589934592 - vpnv6-ucast 34359738368 - security-hops 137438953472 - bmp-activate-server-1 274877906944 - bmp-activate-server-2 549755813888 - dscp 1099511627776 - gshut-activate 2199023255552 - ipv4-mdt 4398046511104 - mhop-intvl 8796093022208 - mhop-auth

bgpPeerAf Properties

Property Name	Data Type	Description	Values
ctrl	bgp:PeerAfControl (scalar:Bitmask16)	Peer address-family control	SELECTION: 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - allow-self-as 64 - default-originate 128 - advertisement-interval 256 - suppress-inactive 512 - nh-self-all
inheritContPeerPolicyCtrl	bgp:InheritContPeerPolicyCtrlType (scalar:Bitmask64)	Inherit control of peer policy parameters	SELECTION: 1 - allow-as-in 2 - send-com-std 4 - rr-client 8 - nh-self 16 - dis-peer-as-check 32 - soft-reconfig-in 64 - max-prefix 128 - route-map-in 256 - route-map-out 512 - prefix-map-in 1024 - prefix-map-out 2048 - fltr-map-in 4096 - fltr-map-out 8192 - unsuppr-map 16384 - default-originate 32768 - advertisement-interval 65536 - addl-paths-send-cap 131072 - addl-paths-recv-cap 262144 - send-com-ext 524288 - suppress-inactive 1048576 - as-override 2097152 - next-hop-third-party 4194304 - wght 8388608 - soo 16777216 - advt-map 33554432 - encap-mpls 67108864 - rewrite-rt-asn 134217728 - adv-gw-ip 268435456 - adv-loc-lbl-rt 536870912 - nh-self-all 1073741824 - import-vpn-unicast 2147483648 - import-l2vpn-evpn
nhSelfAll	scalar:Bool	Set address as next-hop for all routes	SELECTION: true or false
type	bgp:AfT (scalar:Enum8)	Type	SELECTION: 1 - ipv4-ucast 2 - ipv4-mcast 3 - vpnv4-ucast 5 - ipv6-ucast 6 - ipv6-mcast 7 - vpnv6-ucast 8 - vpnv6-mcast 9 - l2vpn-evpn 10 - ipv4-lucast 11 - ipv6-lucast 12 - lnkstate 13 - ipv4-mvpn 14 - ipv6-mvpn 15 - l2vpn-vpls 16 - ipv4-mdt DEFAULT: ipv4-ucast

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Response

Configuring an IPv6 Unicast Subaddress Family Under a BGP Neighbor (IP Address)

Applying an AS-PATH Filter List to Incoming Routes

Applying an AS-PATH Filter List to Outgoing Routes

Applying a Prefix List to Incoming Routes

Applying a Prefix List to Outgoing Routes

Configuring the Address as Nexthop for All Routes

Deleting the Address as Nexthop for All Routes