Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)

Latest

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Configuring to Deny

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/rpm.json
{
  "rpmEntity": {
    "children": [
      {
        "rtmaclistRuleMac": {
          "attributes": {
            "name": "SampleString_123"
          },
          "children": [
            {
              "rtmaclistEntry": {
                "attributes": {
                  "action": "deny",
                  "macAddr": "D8:B1:90:71:E9:03",
                  "macAddrMask": "D8:B1:90:71:E9:03",
                  "order": "1243"
}}}]}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <rpm-items>
    <maclist-items>
      <RuleMac-list>
        <name>SampleString_123</name>
        <ent-items>
          <Entry-list>
            <order>1243</order>
            <action>deny</action>
            <macAddr>D8:B1:90:71:E9:03</macAddr>
            <macAddrMask>D8:B1:90:71:E9:03</macAddrMask>
          </Entry-list>
        </ent-items>
      </RuleMac-list>
    </maclist-items>
  </rpm-items>
</System>

Configuring MAC Lists

You can configure a MAC list to permit or deny a range of MAC addresses.

For more information, see the Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-3000-series-switches/tsd-products-support-series-home.html

Configuring to Deny

Note: This example was added in Release 9.3(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

mac-list SampleString_123 seq 1243 deny d8b1.9071.e903 d8b1.9071.e903

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
rpmEntity	sys/rpm
rtmaclistRuleMac	sys/rpm/maclist-[SampleString_123]
rtmaclistEntry	sys/rpm/maclist-[SampleString_123]/ent-1243

rtmaclistRuleMac Properties

The following table contains information about the rtmaclistRuleMac properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	pol:ObjName (naming:Name256)	Object name	MAX SIZE: 64

rtmaclistEntry Properties

The following table contains information about the rtmaclistEntry properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
action	rtflt:Action (scalar:Enum8)	Action	SELECTION: 0 - deny 1 - permit DEFAULT: permit
macAddr	address:MAC	Mac Address	Value must match MM:MM:MM:SS:SS:SS format
macAddrMask	address:MAC	Mac Address Mask	Value must match MM:MM:MM:SS:SS:SS format
order	rtflt:Order (scalar:Uint32)	Order	RANGE: [1 , 4294967294]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring to Permit