Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)
Configuring Fan Zone Speed
DME
YANG
Copy
POST http://<mgmt0_IP>/api/mo/sys/ops.json

{
  "eqptEntity": {
    "children": [
      {
        "eqptFanZone": {
          "attributes": {
            "zoneSpeed": "123"
}}}]}}

Response
{
    imdata:[]
}

Copy
<System>
  <ops-items>
    <fanzone-items>
      <zoneSpeed>123</zoneSpeed>
    </fanzone-items>
  </ops-items>
</System>

Configuring Fan Zone Speed

Configuring Fan Zone Speed

Note: This example was added in Release 9.2(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

hardware fan-zone 1 raise-speed 123

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
eqptEntity sys/ops
eqptFanZone sys/ops/fanzone


eqptFanZone Properties

The following table contains information about the eqptFanZone properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
zoneSpeedscalar:Uint32
The fan zone speedRANGE: [0, 4294967295]


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Fan Zone Speed

Deleting Fan Zone Speed

Note: This example was added in Release 9.2(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no hardware fan-zone 1 raise-speed 123

Note: The property information for this example was added in Release 9.3(3).


Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MODN
eqptEntity sys/ops
eqptFanZone sys/ops/fanzone


eqptFanZone Properties

The following table contains information about the eqptFanZone properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property NameData TypeDescriptionValues
zoneSpeedscalar:Uint32
The fan zone speedRANGE: [0, 4294967295]


Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Next