Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)

Latest

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Configuring the Fast Reload Stablization Time

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/sysmgr.json
{
  "sysmgrEntity": {
    "children": [
      {
        "sysmgrConfig": {
          "attributes": {
            "adminSt": "enable",
            "fastReloadTimer": "2886"
}}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <sysmgr-items>
    <config-items>
      <adminSt>enable</adminSt>
      <fastReloadTimer>2886</fastReloadTimer>
    </config-items>
  </sysmgr-items>
</System>

Configuring the Fast Reload Network Stabilization Timer

Configuring the Fast Reload Stablization Time

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

system fast-reload stabilization-timer 2886

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
sysmgrConfig	sys/sysmgr/config
sysmgrEntity	sys/sysmgr

sysmgrConfig Properties

The following table contains information about the sysmgrConfig properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
adminSt	sysmgr:CfgAdminSt (scalar:Enum8)	State to configure sysmgr properites	SELECTION: 0 - enable 1 - disable-all 2 - disable-trc-mask 3 - disable-fast-timer DEFAULT: disable-all
fastReloadTimer	sysmgr:ReloadTimer (scalar:Uint32)	Fast-reload timer value for network stabilization(in secs). Used only during fast-reload	RANGE: [10 , 10000]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Fast Reload Stablization Time