Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)
Crypto ca import for mytrustpoing pkcs12
DME
Copy
POST http://10.126.67.45/api/mo/sys/action.json

{
"actionLSubj": {
"attributes": {
"dn": "sys/action/lsubj-[sys/userext]"
}
"children": [{
"aaaUserEpCryptoCaImportLTask": {
"attributes": {
"adminSt": "start",
"dn": "sys/action/lsubj-[sys/userext]/aaaUserEpCryptoCaImportLTask",
"trustpoint": "test",
"fileFormat": "pkcs12",
"sourceFilePath": "/bootflash/server.pfx",
"passphrase": "cisco123",
"freq": "one-shot"
}
}
}]
}
}

Crypto ca import for mytrustpoint pkcs12

This section provides details on DMEization of crypto ca import CLI.

Crypto ca import for mytrustpoing pkcs12

The CLI command below is the equivalent of the payload example displayed in the pane on the right.

crypto ca import <trustpoint-label> pkcs12 bootflash:<file> <passphrase>

Note: The property information for this example was added in Release 10.2(1)F.

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Next