Enabling and Disabling LLDP

Before you can access the LLDP commands, you must enable the LLDP feature.

Enabling LLDP

Enabling LLDP

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "fmEntity": {
          "children": [
            {
              "fmLldp": {
                "attributes": {
                  "adminSt": "enabled"
                }
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <fm-items>
    <lldp-items>
      <adminSt>enabled</adminSt>
    </lldp-items>
  </fm-items>
</System>

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

feature lldp

Note: The property information for this example was added in Release 9.3(3).

Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
topSystem	sys
fmEntity	sys/fm
fmLldp	sys/fm/lldp

fmLldp Properties

The following table contains information about the fmLldp properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
adminSt	fm:AdminState (scalar:Enum8)	Admin status	SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling LLDP

Disabling LLDP

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "fmEntity": {
          "children": [
            {
              "fmLldp": {
                "attributes": {
                  "adminSt": "disabled"
                }
              }
            }
          ]
        }
      }
    ]
  }
}

{
    imdata:[]
}

<System>
  <fm-items>
    <lldp-items>
      <adminSt>disabled</adminSt>
    </lldp-items>
  </fm-items>
</System>