Enabling and Disabling EVPN/MVPN Features
Enabling the Next-Generation Multicast VPN (ngMVPN) control plane makes new address family commands available in BGP and new options for configuring tenant routed multicast. For more information about ngMVPN and tenant routed multicast, see the Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide.
Enabling EVPN/MVPN Features
Enabling EVPN/MVPN Features
POST http://<mgmt0_IP>/api/mo/sys/fm.json
{
"fmEntity": {
"children": [
{
"fmNgmvpn": {
"attributes": {
"adminSt": "enabled"
}}}]}}
{
imdata:[]
}
<System>
<fm-items>
<ngmvpn-items>
<adminSt>enabled</adminSt>
</ngmvpn-items>
</fm-items>
</System>
Enables the Next-Generation Multicast VPN (ngMVPN) control plane. New address family commands become available in BGP.
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
feature ngmvpn
Note: The property information for this example was added in Release 9.3(3).
Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.
MO | DN |
---|---|
fmEntity | sys/fm |
fmNgmvpn | sys/fm/ngmvpn |
fmNgmvpn Properties
The following table contains information about the fmNgmvpn properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.
Property Name | Data Type | Description | Values |
---|---|---|---|
adminSt | fm:AdminState (scalar:Enum8) | Admin status | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
Related Documentation
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:
Disabling EVPN/MVPN Features
Disabling EVPN/MVPN Features
POST http://<mgmt0_IP>/api/mo/sys/fm.json
{
"fmEntity": {
"children": [
{
"fmNgmvpn": {
"attributes": {
"adminSt": "disabled"
}}}]}}
{
imdata:[]
}
<System>
<fm-items>
<ngmvpn-items>
<adminSt>disabled</adminSt>
</ngmvpn-items>
</fm-items>
</System>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
no feature ngmvpn
Note: The property information for this example was added in Release 9.3(3).
Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.
MO | DN |
---|---|
fmEntity | sys/fm |
fmNgmvpn | sys/fm/ngmvpn |
fmNgmvpn Properties
The following table contains information about the fmNgmvpn properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.
Property Name | Data Type | Description | Values |
---|---|---|---|
adminSt | fm:AdminState (scalar:Enum8) | Admin status | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
Related Documentation
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: