Enabling EIGRP
Enabling EIGRP
POST http://<mgmt_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"fmEntity": {
"children": [
{
"fmEigrp": {
"attributes": {
"adminSt": "enabled"
}
}
}
]
}
}
]
}
}
{
imdata:[]
}
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<System xmlns="http://cisco.com/ns/yang/cisco-nx-os-device">
<fm-items>
<eigrp-items>
<adminSt>enabled</adminSt>
</eigrp-items>
</fm-items>
</System>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
feature eigrp
Note: The property information for this example was added in release 10.2(2)F.
Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.
| MO | DN |
|---|---|
| fmEigrp | sys/fm/eigrp |
fmeigrp Properties
The following table contains information about the fmeigrp properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.
| Property Name | Data Type | Values | Description |
|---|---|---|---|
| adminSt | fm: AdminState scalar: Enum8 | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled (2) | Admin status of EIGRP feature |
Related Documentation
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: