END_CALL_EVENT
An END_CALL_EVENT message is generated when the association between a call and the client is dissolved and no further call-event messages for the call are sent to this client. This message does not necessarily indicate that the subject call has been terminated.
This message is optional.
The following tables define the format of the END_CALL_EVENT message.
|
Fixed part Field name |
Value |
Data type |
Byte size |
|---|---|---|---|
|
reserved |
Set this value to 0. |
UINT |
4 |
|
reserved |
Set this value to 1. |
UINT |
4 |
|
reserved |
Set this value to 21. |
USHORT |
2 |
|
ConnectionDeviceType |
Set this value to 0. The type of device ID supplied in the ConnectionDeviceID floating field. See ConnectionDeviceType Values. |
USHORT |
2 |
|
CallID |
The Call ID value assigned to this call by Unified CCX. |
UINT |
4 |
|
Floating part Field name |
Value |
Data type |
Maximum size |
|---|---|---|---|
|
ConnectionDeviceID[25] (required) |
The ID of the connection between the call and the device. In CTI Protocol Version 14, the general rules for the Primary.Actual Field Format will apply to this field. |
STRING |
64 |