June 11, 2024

New Feature

There are no new customer-facing features for this release.

Resolved Caveat

CDET Identifier Description
CSCwj30268 IW Service: IW9165D always shows out of sync

Supported firmware versions

Industrial Wireless Device Minimum Supported Release* Required Release
IW9167E 17.11.1 (17.11.0.155) 17.14.1 (17.14.0.79)
IW9165E 17.12.1 (17.12.1.5) 17.14.1 (17.14.0.79)
IW9165D 17.12.1 (17.12.1.5) 17.14.1 (17.14.0.79)
IEC-6400 1.0.1 (1.0.1.3) 1.0.1 (1.0.1.3)

Note: * This version is required for the device to be visible in IoT OD. The device must be upgraded to the required release to use most features.

May 14, 2024

New Feature

Introducing release 17.14.1 (17.14.0.79) for Cisco Catalyst IW9167E, IW9165E, and IW9165D access points.

Supported firmware versions

Industrial Wireless Device Minimum Supported Release* Required Release
IW9167E 17.11.1 (17.11.0.155) 17.14.1 (17.14.0.79)
IW9165E 17.12.1 (17.12.1.5) 17.14.1 (17.14.0.79)
IW9165D 17.12.1 (17.12.1.5) 17.14.1 (17.14.0.79)
IEC-6400 1.0.1 (1.0.1.3) 1.0.1 (1.0.1.3)

Note: * This version is required for the device to be visible in IoT OD. The device must be upgraded to the required release to use most features.

April 24, 2024

New Features

  • Introducing release 1.0.1 (1.0.1.3) for Cisco IEC6400 Edge Compute Appliance. 
  • Introducing a new pop-up in the inventory table that shows when firmware updates will be required to use IW Service for most features.

Resolved Caveat

CDET Identifier Description
CSCwf73435 IW Service: "Add Device" process fails to properly process UTF encoded csv files

Supported firmware versions

Industrial Wireless Device Minimum Supported Release* Required Release
IW9167E 17.11.1 (17.11.0.155) 17.13.1 (17.13.0.109)
IW9165E 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IW9165D 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IEC-6400 1.0.1 (1.0.1.3) 1.0.1 (1.0.1.3)

Note: * This version is required for the device to be visible in IoT OD. The device must be upgraded to the required release to use most features.

March 27, 2024

New Features

  • Introducing new left navigation support which allows you to view all IoT OD supported services on the left navigation pane of the dashboard, irrespective of whether procured or not procured for your organization.
  • Introducing new landing page support which allows you to view information pertaining to any service you wish to know.

Supported firmware versions

Industrial Wireless Device Minimum Supported Release* Required Release
IW9167E 17.11.1 (17.11.0.155) 17.13.1 (17.13.0.109)
IW9165E 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IW9165D 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IEC-6400 1.0.0 (1.0.0.8) 1.0.0 (1.0.0.8)

Note: * This version is required for the device to be visible in IoT OD. The device must be upgraded to the required release to use most features.

February 2, 2024

New Feature

  • Introducing auto-refresh for the following columns in the inventory table:
    • Status (connected / disconnected device)
    • Firmware Version
    • Configuration status (in sync or not)

Resolved Caveat

CDET Identifier Description
CSCwi64679 IW Service: Cannot create group from predefined templates

Supported firmware versions

Industrial Wireless Device Minimum Supported Release* Required Release
IW9167E 17.11.1 (17.11.0.155) 17.13.1 (17.13.0.109)
IW9165E 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IW9165D 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IEC-6400 1.0.0 (1.0.0.8) 1.0.0 (1.0.0.8)

Note: * This version is required for the device to be visible in IoT OD. The device must be upgraded to the required release to use most features.

January 18, 2024

New Feature

  • Introducing release 17.13.1 (17.13.0.109) for Cisco Catalyst IW9167E, IW9165E and IW9165D access points

Supported firmware versions

Industrial Wireless Device Minimum Supported Release* Required Release
IW9167E 17.11.1 (17.11.0.155) 17.13.1 (17.13.0.109)
IW9165E 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IW9165D 17.12.1 (17.12.1.5) 17.13.1 (17.13.0.109)
IEC-6400 1.0.0 (1.0.0.8) 1.0.0 (1.0.0.8)

Note: * This version is required for the device to be visible in IoT OD. The device must be upgraded to the required release to use most features.