Web App access method

To configure the Web App access method:

Note: There can be situations where using the Web App access method has limitations. For example, if a website is implemented using redirect from the web-site's URL to a static IP address the redirect does not work properly or if the website uses websockets in its implementation. If there is any question in using Web App as an access method, it is recommended to use SEA Plus as an alternative access method.

1. From the Services panel, choose Secure Equipment Access > System Management > Network Devices. 
2. Open the Network Device Details screen and click on a device name that is listed in the Connected Clients table to open the Connected Client Details page.

Note: For detailed information on adding Connected Clients, see Add Network Devices and Connected Clients to a group.

3. Click Add Access Method. 
4. Choose Web App from the Access Method list.

Connected Client Details

• Client Name: IP Address of Connected Client. (Read-Only)
• IP Address/Host Name:IP Address of Connected Client. (Read-Only)

Access Method Details

• Access Method: Web App
• Full URL Enter the full URL of the client device. (Example: https://10.8.40.145/example/path).

External Equipment Management

• Managed Connected Clients: Choose the additional devices that will be managed by this device. Only subtended devices added to the network device as Connected Clients in EDM can be chosen.

Access Name: Access Name is pre-populated based on the information above and is editable, if desired. If the name already exists, it will be automatically appended with a number. For example, Access Name (2).

• Name: The pre-populated or customized name.
• Description: Maximum length is 150 characters.

6. When the access method is complete, click Add Access Method.

7. Return to the SEA main menu and choose Access Management to give users access to the remote sessions where the appropriate access method(s) reside.