Configuring an IPv6 MVPN Address Family

This section uses examples to demonstrate BGP configuration options and to show how the REST APIs correspond to the CLI commands.

Configuring all Routes Regardless Of Target-VPN Communities

Configuring all Routes Regardless Of Target-VPN Communities

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "retainRttAll": "enabled",
                        "retainRttRtMap": "",
                        "type": "ipv6-mvpn"
}}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>ipv6-mvpn</type>
              <retainRttAll>enabled</retainRttAll>
              <retainRttRtMap></retainRttRtMap>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 address-family ipv6 mvpn
  retain route-target all

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting The Configuration Of All Routes

Deleting The Configuration Of All Routes

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "retainRttAll": "disabled",
                        "retainRttRtMap": "",
                        "type": "ipv6-mvpn"
}}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>ipv6-mvpn</type>
              <retainRttAll>disabled</retainRttAll>
              <retainRttRtMap></retainRttRtMap>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 address-family ipv6 mvpn
  no retain route-target all

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Route Map To Filter Routes

Applying a Route Map To Filter Routes

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "retainRttAll": "disabled",
                        "retainRttRtMap": "Rt_Map1",
                        "type": "ipv6-mvpn"
}}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>ipv6-mvpn</type>
              <retainRttAll>disabled</retainRttAll>
              <retainRttRtMap>Rt_Map1</retainRttRtMap>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 address-family ipv6 mvpn
  retain route-target route-map Rt_Map1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Route Map To Filter Routes

Deleting a Route Map To Filter Routes

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpDomAf": {
                      "attributes": {
                        "retainRttAll": "disabled",
                        "retainRttRtMap": "",
                        "type": "ipv6-mvpn"
}}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>ipv6-mvpn</type>
              <retainRttAll>disabled</retainRttAll>
              <retainRttRtMap></retainRttRtMap>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 address-family ipv6 mvpn
  no retain route-target route-map Rt_Map1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling the checking of Peer AS-Number While Advertising

Disabling the checking of Peer AS-Number While Advertising

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "dis-peer-as-check",
                              "inheritContPeerPolicyCtrl": "",
                              "type": "ipv6-mvpn"
}}}]}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <ctrl>dis-peer-as-check</ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family ipv6 mvpn
  disable-peer-as-check

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling the checking of Peer AS-Number While Advertising (inherited from a Peer Template Under IPv6 MVPN)

Disabling the checking of Peer AS-Number While Advertising (inherited from a Peer Template Under IPv6 MVPN)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "100"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": "",
                              "peerImp": "P_1"
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "ctrl": "",
                                    "inheritContPeerPolicyCtrl": "",
                                    "type": "ipv6-mvpn"
                                  }
                                }
                              }
                            ]
                          }
                        },
                        {
                          "bgpPeerCont": {
                            "attributes": {
                              "inheritContPeerCtrl": "",
                              "name": "P_1"
                              "ctrl": "16",
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <peerImp>P_1</peerImp>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
          <peercont-items>
            <PeerCont-list>
              <name>P_1</name>
              <ctrl>16</ctrl>
              <inheritContPeerCtrl></inheritContPeerCtrl>
            </PeerCont-list>
          </peercont-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

The default is only valid when inheriting a template.

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 template peer P_1  neighbor 1.2.3.4
  inherit peer P_1
   address-family ipv6 mvpn
    default disable-peer-as-check

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Enabling the checking of Peer AS-Number While Advertising

Enabling the checking of Peer AS-Number While Advertising

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "ctrl": "",
                              "inheritContPeerPolicyCtrl": "",
                              "type": "ipv6-mvpn"
}}}]}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <ctrl></ctrl>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family ipv6 mvpn
  no disable-peer-as-check

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Auto-Generating RTs for an EBGP Neighbor

Auto-Generating RTs for an  EBGP Neighbor

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "rewriteRtAsn": "enabled",
                              "type": "ipv6-mvpn"
}}}]}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <rewriteRtAsn>enabled</rewriteRtAsn>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family ipv6 mvpn
  rewrite-rt-asn

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Auto-Generating RTs for an EBGP Neighbor (inherited from a Peer Template Under IPv6 MVPN)

Auto-Generating RTs for an  EBGP Neighbor (inherited from a Peer Template Under IPv6 MVPN)

POST http://<mgmt0_IP>/api/mo/sys.json

 {
  "topSystem": {
    "children": [
      {
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "100"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": "",
                              "peerImp": "P_1"
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "inheritContPeerPolicyCtrl": "",
                                    "rewriteRtAsn": "disabled",
                                    "type": "ipv6-mvpn"
                                  }
                                }
                              }
                            ]
                          }
                        },
                        {
                          "bgpPeerCont": {
                            "attributes": {
                              "inheritContPeerCtrl": "",
                              "name": "P_1"
                              "rewriteRtAsn": "enabled",
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <peerImp>P_1</peerImp>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <rewriteRtAsn>disabled</rewriteRtAsn>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
          <peercont-items>
            <PeerCont-list>
              <name>P_1</name>
              <inheritContPeerCtrl></inheritContPeerCtrl>
            </PeerCont-list>
          </peercont-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

The default is only valid when inheriting a template.

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 template peer P_1
 neighbor 1.2.3.4
  inherit peer P_1
 address-family ipv6 mvpn
 default rewrite-rt-asn

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling Auto-Generating RTs for an EBGP Neighbor

Disabling Auto-Generating RTs for an EBGP Neighbor

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "rewriteRtAsn": "disabled",
                              "type": "ipv6-mvpn"
}}}]}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <rewriteRtAsn>disabled</rewriteRtAsn>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family ipv6 mvpn
  no rewrite-rt-asn

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Setting Inbound Soft Reconfiguration To Always

Setting Inbound Soft Reconfiguration To Always

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "softReconfigBackup": "inbound-always",
                              "type": "ipv6-mvpn"
}}}]}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <softReconfigBackup>inbound-always</softReconfigBackup>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family ipv6 mvpn
  soft-reconfiguration inbound always

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Inbound Soft Reconfiguration (inherited from a Peer Template Under IPv6 MVPN)

Configuring Inbound Soft Reconfiguration (inherited from a Peer Template Under IPv6 MVPN)

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "bgpEntity": {
          "children": [
            {
              "bgpInst": {
                "attributes": {
                  "asn": "100"
                },
                "children": [
                  {
                    "bgpDom": {
                      "attributes": {
                        "name": "default"
                      },
                      "children": [
                        {
                          "bgpPeer": {
                            "attributes": {
                              "addr": "1.2.3.4",
                              "inheritContPeerCtrl": "",
                              "peerImp": "P_1"
                            },
                            "children": [
                              {
                                "bgpPeerAf": {
                                  "attributes": {
                                    "inheritContPeerPolicyCtrl": "",
                                    "softReconfigBackup": "none",
                                    "type": "ipv6-mvpn"
                                  }
                                }
                              }
                            ]
                          }
                        },
                        {
                          "bgpPeerCont": {
                            "attributes": {
                              "inheritContPeerCtrl": "",
                              "name": "P_1",
                              "softReconfigBackup": "1"
                            }
                          }
                        }
                      ]
                    }
                  }
                ]
              }
            }
          ]
        }
      }
    ]
  }
}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <peerImp>P_1</peerImp>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <softReconfigBackup>none</softReconfigBackup>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
          <peercont-items>
            <PeerCont-list>
              <name>P_1</name>
              <inheritContPeerCtrl></inheritContPeerCtrl>
            </PeerCont-list>
          </peercont-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

The default is only valid when inheriting a template.

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 template peer P_1
 neighbor 1.2.3.4
  inherit peer P_1
   address-family ipv6 mvpn
   default soft-reconfiguration inbound

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling Inbound Soft Reconfiguration

Disabling Inbound Soft Reconfiguration

POST http://<mgmt0_IP>/api/mo/sys/bgp.json

{
  "bgpEntity": {
    "children": [
      {
        "bgpInst": {
          "attributes": {
            "asn": "100"
          },
          "children": [
            {
              "bgpDom": {
                "attributes": {
                  "name": "default"
                },
                "children": [
                  {
                    "bgpPeer": {
                      "attributes": {
                        "addr": "1.2.3.4",
                        "inheritContPeerCtrl": ""
                      },
                      "children": [
                        {
                          "bgpPeerAf": {
                            "attributes": {
                              "inheritContPeerPolicyCtrl": "",
                              "softReconfigBackup": "none",
                              "type": "ipv6-mvpn"
}}}]}}]}}]}}]}}

{
    "imdata": []
}

<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <peer-items>
            <Peer-list>
              <addr>1.2.3.4</addr>
              <inheritContPeerCtrl></inheritContPeerCtrl>
              <af-items>
                <PeerAf-list>
                  <type>ipv6-mvpn</type>
                  <inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
                  <softReconfigBackup>none</softReconfigBackup>
                </PeerAf-list>
              </af-items>
            </Peer-list>
          </peer-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family ipv6 mvpn
  no soft-reconfiguration inbound

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html