Enabling and Disabling RPF on the Switch

This section contains payload examples and CLIs to demonstrate how to use the NX-API REST API to configure Unicast RPF on Cisco Nexus 3000 and 9000 Series switches and to show how the REST APIs correspond to the CLI commands. For more information, see the Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 7.x.

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-installation-and-configuration-guides-list.html/

Enabling Unicast RPF on the Switch

Enabling Unicast RPF on the Switch

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "platformEntity": {
          "attributes": {
            "urpfStatus": "disabled"
          }
        }
      }
    ]
  }
}

{
    "imdata": []
}

<System>
  <pltfm-items>
    <urpfStatus>disabled</urpfStatus>
  </pltfm-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

system urpf disable

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

Disabling Unicast RPF on the Switch

Disabling Unicast RPF on the Switch

POST http://<mgmt0_IP>/api/mo/sys.json

{
  "topSystem": {
    "children": [
      {
        "platformEntity": {
          "attributes": {
            "urpfStatus": "disabled"
          }
        }
      }
    ]
  }
}

{
    "imdata": []
}

<System>
  <pltfm-items>
    <urpfStatus>disabled</urpfStatus>
  </pltfm-items>
</System>

Note: This example was added in Release 7.0(3)I7(3).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

no system urpf disable

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html