Equipment Diagnostics

Diagnostic Actions

Diagnostic Actions

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
"actionLSubj": {
    "attributes": {
        "dn": "sys/action/lsubj-[sys/diag/rule-[type]-trig-[trig]/subj-[oDn]]"
    }
    "children" : [{
        "eqptdiagSubjTestLTask" : {
            "attributes" : {
                "adminSt" : "start",
                "dn" : "sys/action/lsubj-[sys/diag/rule-[type]-trig-[trig]/subj-[oDn]]/eqptdiagSubjTestLTask",
                "freq": "one-shot"
                }
            }
       }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. The command options include the following:

diagnostic ?
  clear Erase Diagnostic Test Results/Stats
  ondemand On demand diagnostic setting
  start Starting on demand diagnostic
  stop Stopping diagnostic
  test Diagnostic test selection

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Managing the Equipment

Locating the Chassis

Locating the Chassis

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
     "actionLSubj": {
         "attributes": {
             "dn": "sys/action/lsubj-[sys/ch]"
         }
         "children" : [{
             "eqptChLocateLTask" : {
                 "attributes" : {
                      "adminSt" : "start",
                      "dn" : "sys/action/lsubj-[sys/ch]/eqptChLocateLTask",
                      "freq": "one-shot"
                      }
             }
         }]
     }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led module <mod-num>

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Locating the Fan Tray

Locating the Fan Tray

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/ftslot-1/ft]"
        }
        "children" : [{
            "eqptFtLocateLTask" : {
                "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/ftslot-1/ft]/eqptFtLocateLTask",
                     "freq": "one-shot"
                     }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led fan 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Locating the Linecard

Locating the Linecard

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
                "actionLSubj": {
                    "attributes": {
                        "dn": "sys/action/lsubj-[sys/ch/lcslot-1/lc]"
                    }
                    "children" : [{
                        "eqptLCLocateLTask" : {
                            "attributes" : {
                                 "adminSt" : "start",
                                 "dn" : "sys/action/lsubj-[sys/ch/lcslot-1/lc]/eqptLCLocateLTask",
                                 "freq": "one-shot"
                                 }
                        }
                    }]
                }
            }

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led module 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Locating the System Controller

Locating the System Controller

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/scslot-1/sc]"
        }
        "children" : [{
            "eqptSysCLocateLTask" : {
                "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/scslot-1/sc]/eqptSysCLocateLTask",
                     "freq": "one-shot"                                       
                    }
                }
           }]
   }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led module 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Locating the Extended Chassis

Locating the Extended Chassis

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/extch-101]"
        }
        "children" : [{
            "eqptExtChLocateLTask" : {
                "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/extch-101]/eqptExtChLocateLTask",
                     "freq": "one-shot"
                     }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led fex 101

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Locating the FC

Locating the FC

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/fcslot-1/fc]"
        }
        "children" : [{
            "eqptFCLocateLTask" : {
                "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/fcslot-1/fc]/eqptFCLocateLTask",
                     "freq": "one-shot"
                     }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led module 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Locating the Supervisor Card

Locating the Supervisor Card

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/supslot-1/sup]"
        }
        "children" : [{
            "eqptSupCLocateLTask" : {
                 "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/supslot-1/sup]/eqptSupCLocateLTask",
                     "freq": "one-shot"
                    }
                }
           }]
   }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

locator-led module 1

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reloading the Linecard

Reloading the Linecard

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/lcslot-1/lc]"
        }
        "children" : [{
            "eqptLCReloadLTask" : {
                "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/lcslot-1/lc]/eqptLCReloadLTask",
                     "freq": "one-shot"
                     }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

reload module <mod>

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reloading the FC

Reloading the FC

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/fcslot-1/fc]"
        }
        "children" : [{
            "eqptFCReloadLTask" : {
                "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/fcslot-1/fc]/eqptFCReloadLTask",
                     "freq": "one-shot"
                     }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

reload module <mod>

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reloading the System Controller

Reloading the System Controller

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
       "actionLSubj": {
           "attributes": {
               "dn": "sys/action/lsubj-[sys/ch/scslot-1/sc]"
           }
           "children" : [{
               "eqptSysCReloadLTask" : {
                   "attributes" : {
                        "adminSt" : "start",
                        "dn" : "sys/action/lsubj-[sys/ch/scslot-1/sc]/eqptSysCReloadLTask",
                        "freq": "one-shot"
                        }
                    }
               }]
     }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

reload module <mod>

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reloading the Chassis

Reloading the Chassis

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
     "actionLSubj": {
         "attributes": {
             "dn": "sys/action/lsubj-[sys/ch]"
         }
         "children" : [{
             "eqptChReloadLTask" : {
                 "attributes" : {
                      "adminSt" : "start",
                      "dn" : "sys/action/lsubj-[sys/ch]/eqptChReloadLTask",
                      "freq": "one-shot"
                      }
             }
         }]
     }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

reload module <mod>

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reloading the Supervisor Card

Reloading the Supervisor Card

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
    "actionLSubj": {
        "attributes": {
            "dn": "sys/action/lsubj-[sys/ch/supslot-1/sup]"
        }
        "children" : [{
            "eqptSupCReloadLTask" : {
                 "attributes" : {
                     "adminSt" : "start",
                     "dn" : "sys/action/lsubj-[sys/ch/supslot-1/sup]/eqptSupCReloadLTask",
                     "freq": "one-shot"
                     }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

reload module <mod>

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Reloading the Extended Chassis

Reloading the Extended Chassis

POST http://<mgmt0_IP>/api/mo/sys/action.json

{
               "actionLSubj": {
                   "attributes": {
                       "dn": "sys/action/lsubj-[sys/extch-101]"
                   }
                   "children" : [{
            "eqptExtChReloadLTask" : {
                "attributes" : {
                    "adminSt" : "start",
                    "dn" : "sys/action/lsubj-[sys/extch-101]/eqptExtChReloadLTask",
                    "freq": "one-shot"
                    }
            }
        }]
    }
}

{
  "imdata": []
}

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right.

reload fex 101

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html