OC Relay Agent
Package: openconfig-relay-agent.yang
Enabling IPv4 DHCP Relay
Enabling IPv4 DHCP Relay
Request:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<config>
<enable-relay-agent xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">true</enable-relay-agent>
</config>
</dhcp>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
ip dhcp relay
Getting the DHCP Relay-Enable Status
Getting the DHCP Relay-Enable Status
Request:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<config>
<enable-relay-agent/>
</config>
</dhcp>
</relay-agent>
</filter>
</get-config>
</rpc>
Enabling DHCP Relay Address on an Interface
Enabling DHCP Relay Address on an Interface
Request:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<interfaces>
<interface>
<id xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/1</id>
<config>
<id xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/1</id>
<helper-address xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="create">1.1.1.1</helper-address>
</config>
</interface>
</interfaces>
</dhcp>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
interface ethernet 1/1ip dhcp relay address 1.1.1.1
Getting the Interface DHCP Relay Address Configuration (Interface Filtered)
Getting the Interface DHCP Relay Address Configuration (Interface Filtered)
Request:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<interfaces>
<interface>
<id>eth1/1</id>
<config>
<id/>
<helper-address/>
</config>
</interface>
</interfaces>
</dhcp>
</relay-agent>
</filter>
</get-config>
</rpc>
Getting the DHCP Relay Address Configuration on all Interfaces (Interface Unfiltered)
Getting the DHCP Relay Address Configuration on all Interfaces (Interface Unfiltered)
Request:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<interfaces>
<interface>
<config>
<id/>
<helper-address/>
</config>
</interface>
</interfaces>
</dhcp>
</relay-agent>
</filter>
</get-config>
</rpc>
Enabling Option 82
Enabling Option 82
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<agent-information-option xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">
<config>
<enable nc:operation="merge">true</enable>
</config>
</agent-information-option>
</dhcp>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
ip dhcp relay information option
Getting Option 82 Status
Getting Option 82 Status
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<agent-information-option/>
</dhcp>
</relay-agent>
</filter>
</get-config>
</rpc>
Configuring a DHCP Relay Source Interface on an Interface
Configuring a DHCP Relay Source Interface on an Interface
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<interfaces>
<interface>
<id xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/1</id>
<interface-ref>
<config>
<interface xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/2</interface>
</config>
</interface-ref>
</interface>
</interfaces>
</dhcp>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
interface Ethernet1/1
ip dhcp relay source-interface Ethernet1/2
no shutdown
Getting the Interface DHCP Relay Source Interface Configuration (Interface Filtered)
Getting the Interface DHCP Relay Source Interface Configuration (Interface Filtered)
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<interfaces>
<interface>
<id>eth1/1</id>
<interface-ref>
<config>
<interface/>
</config>
</interface-ref>
</interface>
</interfaces>
</dhcp>
</relay-agent>
</filter>
</get-config>
</rpc>
Getting the DHCP Relay Source Interface Configuration on all Interfaces (Interface Unfiltered)
Getting the DHCP Relay Source Interface Configuration on all Interfaces (Interface Unfiltered)
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcp>
<interfaces>
<interface>
<interface-ref>
<config>
<interface/>
</config>
</interface-ref>
</interface>
</interfaces>
</dhcp>
</relay-agent>
</filter>
</get-config>
</rpc>
Enabling IPv6 DHCP Relay
Enabling IPv6 DHCP Relay
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<config>
<enable-relay-agent xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">true</enable-relay-agent>
</config>
</dhcpv6>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
ipv6 dhcp relay
Getting the IPv6 DHCP Relay Status
Getting the IPv6 DHCP Relay Status
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<config>
<enable-relay-agent/>
</config>
</dhcpv6>
</relay-agent>
</filter>
</get-config>
</rpc>
Enabling IPv6 DHCP Relay Address on an Interface
Enabling IPv6 DHCP Relay Address on an Interface
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<interfaces>
<interface>
<id xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/1</id>
<config>
<id xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/1</id>
<helper-address xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="create">2001::10</helper-address>
</config>
</interface>
</interfaces>
</dhcpv6>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
interface Ethernet1/1
ipv6 dhcp relay address 2001::10
Getting the Interface IPv6 DHCP Relay Address Configuration (Interface Filtered)
Getting the Interface IPv6 DHCP Relay Address Configuration (Interface Filtered)
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<interfaces>
<interface>
<id>eth1/1</id>
<config>
<id/>
<helper-address/>
</config>
</interface>
</interfaces>
</dhcpv6>
</relay-agent>
</filter>
</get-config>
</rpc>
Getting the IPv6 DHCP Relay Address Configuration on all Interfaces (Interface unfiltered)
Getting the IPv6 DHCP Relay Address Configuration on all Interfaces (Interface unfiltered)
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<interfaces>
<interface>
<config>
<id/>
<helper-address/>
</config>
</interface>
</interfaces>
</dhcpv6>
</relay-agent>
</filter>
</get-config>
</rpc>
Configuring an IPv6 Source Interface on an Interface
Configuring an IPv6 Source Interface on an Interface
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<edit-config>
<target>
<running/>
</target>
<config>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<interfaces>
<interface>
<config>
<helper-address xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">eth1/1</helper-address>
</config>
<interface-ref xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="merge">
<config>
<interface nc:operation="merge">eth1/2</interface>
</config>
</interface-ref>
</interface>
</interfaces>
</dhcpv6>
</relay-agent>
</config>
</edit-config>
</rpc>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right.
interface Ethernet1/1
ipv6 dhcp relay source-interface Ethernet1/2
Getting the Interface IPv6 Source Interface Configuration (Interface Filtered)
Getting the Interface IPv6 Source Interface Configuration (Interface Filtered)
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<interfaces>
<interface>
<id>eth1/1</id>
<interface-ref>
<config>
<interface/>
</config>
</interface-ref>
</interface>
</interfaces>
</dhcpv6>
</relay-agent>
</filter>
</get-config>
</rpc>
Getting the IPv6 Source Interface Configuration on all Interfaces (Interface Unfiltered)
Getting the IPv6 Source Interface Configuration on all Interfaces (Interface Unfiltered)
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent">
<dhcpv6>
<interfaces>
<interface>
<interface-ref>
<config>
<interface/>
</config>
</interface-ref>
</interface>
</interfaces>
</dhcpv6>
</relay-agent>
</filter>
</get-config>
</rpc>
Getting the Entire DHCP/DHCPv6 Configuration on the Switch
Getting the Entire DHCP/DHCPv6 Configuration on the Switch
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="101">
<get-config>
<source>
<running/>
</source>
<filter>
<relay-agent xmlns="http://openconfig.net/yang/relay-agent"/>
</filter>
</get-config>
</rpc>