show bfd clients

show bfd clients

import json

"""
Modify these please
"""
url='http://<IP_Address>/ins'
switchuser='<User_ID>'
switchpassword='<Password>'

myheaders={'content-type':'application/json'}
payload={
  "ins_api":{
  "version": "1.0",
  "type": "cli_show",
  "chunk": "0",
  "sid": "1",
  "input": "show bfd clients",
  "output_format": "json"
}

response = requests.post(url,data=json.dumps(payload), headers=myheaders,auth=(switchuser,switchpassword)).json()
output = json.dumps(response, indent=4, sort_keys=True)


{

    "ins_api": {
        "outputs": {
            "output": {
                "body": {
                    "TABLE-bfdClients": {
                        "client_name": [
                            "bgp", 
                            "eth_port_channel"
                        ], 
                        "num_sess": [
                            "12", 
                            "1"
                        ]
                    }, 
                    "header": "1"
                }, 
                "code": "200", 
                "input": "show bfd clients", 
                "msg": "Success"
            }
        }, 
        "sid": "eoc", 
        "type": "cli_show", 
        "version": "1.0"
    }
}

The CLI output example below corresponds to the payload example in the code pane on the right. For more information about the show bfd clients command, see the CLI command reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

Note: This example was added in Cisco NX-OS Release 7.0(3)I7(4).

Switch# show bfd clients
              Client : Number of sessions
                 bgp : 12
    eth_port_channel : 1

show debug-filter bfd

show debug-filter bfd

import json

"""
Modify these please
"""
url='http://<IP_Address>/ins'
switchuser='<User_ID>'
switchpassword='<Password>'

myheaders={'content-type':'application/json'}
payload={
  "ins_api":{
  "version": "1.0",
  "type": "cli_show",
  "chunk": "0",
  "sid": "1",
  "input": "show debug-filter bfd",
  "output_format": "json"
}

response = requests.post(url,data=json.dumps(payload), headers=myheaders,auth=(switchuser,switchpassword)).json()
output = json.dumps(response, indent=4, sort_keys=True)


{

    "ins_api": {
        "outputs": {
            "output": {
                "body": "", 
                "code": "200", 
                "input": "show debug-filter bfd", 
                "msg": "Success"
            }
        }, 
        "sid": "eoc", 
        "type": "cli_show", 
        "version": "1.0"
    }
}

The CLI output example below corresponds to the payload example in the code pane on the right. For more information about the show debug-filter bfd command, see the CLI command reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

Note: This example was added in Cisco NX-OS Release 7.0(3)I7(4).

Switch# show debug-filter bfd
debug-filter bfd interface Ethernet1/1 
debug-filter bfd session 0x4100000a local discriminator
debug-filter bfd neighbor 1.1.1.1