Cisco Nexus 3000 and 9000 Series NX-API REST SDK and API, Release 7.x
Loading...
Configuring the Distribution of Default Information
DME
YANG
Copy
POST http://<mgmt0_IP>/api/mo/sys/bgp/inst.json

{
"bgpInst": {
  "attributes": {
    "asn": "100"
  },
  "children": [
    {
      "bgpDom": {
        "attributes": {
          "name": "default"
        },
        "children": [
          {
            "bgpDomAf": {
              "attributes": {
                "defInfOrigRd": "rd:as2-nn2:123:12",
                "defInfOrigRtt": "route-target:as2-nn2:1234:12",
                "type": "vpnv6-ucast"
}}}]}}]}}

Response
{
    imdata:[]
}

Copy
<System>
  <bgp-items>
    <inst-items>
      <asn>100</asn>
      <dom-items>
        <Dom-list>
          <name>default</name>
          <af-items>
            <DomAf-list>
              <type>vpnv6-ucast</type>
              <defInfOrigRd>rd:as2-nn2:123:12</defInfOrigRd>
              <defInfOrigRtt>route-target:as2-nn2:1234:12</defInfOrigRtt>
            </DomAf-list>
          </af-items>
        </Dom-list>
      </dom-items>
    </inst-items>
  </bgp-items>
</System>

Configuring a VPNv6 Unicast Address Family

This section uses examples to demonstrate many of the BGP configuration options and to show how the REST APIs correspond to the CLI commands.

Configuring the Distribution of Default Information

Configuring the Distribution of Default Information

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 address-family vpnv6 unicast
  default-information originate always rd 123:12 route-target 1234:12

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configured Distribution of Default Information

Deleting the Configured Distribution of Default Information

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 address-family vpnv6 unicast
  no default-information originate always rd 123:12 route-target 1234:12

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

Configuring the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   inherit peer-policy pol 1
   next-hop-self

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

Deleting the Next Hop of our Peering Address for a Peer (Values inherited from a Peer Template)

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 100
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   inherit peer-policy pol 1
   no next-hop-self

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying an AS-PATH Filter List to Incoming Routes

Applying an AS-PATH Filter List to Incoming Routes

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   filter-list List_A in

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying an AS-PATH Filter List to Outgoing Routes

Applying an AS-PATH Filter List to Outgoing Routes

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   filter-list List_A out

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Prefix List to Incoming Routes

Applying a Prefix List to Incoming Routes

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip prefix-list List_1 seq 10 permit 4.3.2.1/3
router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   prefix-list List_1 in

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Applying a Prefix List to Outgoing Routes

Applying a Prefix List to Outgoing Routes

Note: This example was added in Release 7.0(3)I7(2).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip prefix-list List_1 seq 10 permit 4.3.2.1/3
router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   prefix-list List_1 out

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Multipath for EBGP and IBGP Paths

Configuring Multipath for EBGP and IBGP Paths

Note: This example was added in Release 7.0(3)I7(3).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 address-family vpnv6 unicast
  maximum-paths eibgp 12

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configuration of Multipath for EBGP and IBGP Paths

Deleting the Configuration of Multipath for EBGP and IBGP Paths

Note: This example was added in Release 7.0(3)I7(3).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 address-family vpnv6 unicast
  no maximum-paths eibgp 12

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Peering Address as Nexthop

Configuring the Peering Address as Nexthop

Note: This example was added in Release 7.0(3)I7(3).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  next-hop-self

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Peering Address as Nexthop (Values inherited from a Peer Template)

Configuring the Peering Address as Nexthop (Values inherited from a Peer Template)

Note: This example was added in Release 7.0(3)I7(3).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 template peer-policy Pol1
 neighbor 1.2.3.4
  address-family vpnv6 unicast
   inherit peer-policy Pol1 123
    default next-hop-self

Note: Default is only valid when inheriting a template

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configuration for the Peering Address Set as Nexthop

Deleting the Configuration for the Peering Address Set as Nexthop

Note: This example was added in Release 7.0(3)I7(3).


CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

router bgp 123
 neighbor 1.2.3.4
  address-family vpnv6 unicast
  no next-hop-self

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Next