Configuring an IPv6 Labeled-Unicast Address Family
This section uses examples to demonstrate BGP configuration options and to show how the REST APIs correspond to the CLI commands.
Configuring a Route Map to Selectively Unsuppress Suppressed Routes
Configuring a Route Map to Selectively Unsuppress Suppressed Routes
POST http://<mgmt0_IP>/api/mo/sys/bgp/inst.json
{
"bgpInst": {
"attributes": {
"asn": "100"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast",
"unSupprMap": "map1"
}}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>100</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<unSupprMap>map1</unSupprMap>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 100
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
unsuppress-map map1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Route Map to Selectively Unsuppress Suppressed Routes for a Peer (Values inherited from a Peer Template)
Deleting a Route Map to Selectively Unsuppress Suppressed Routes for a Peer (Values inherited from a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp/inst.json
{
"bgpInst": {
"attributes": {
"asn": "100"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "unsuppr-map",
"type": "ipv6-lucast",
"unSupprMap": "map1"
},
"children": [
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "pol",
"seq": "1"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>100</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl>unsuppr-map</inheritContPeerPolicyCtrl>
<unSupprMap>map1</unSupprMap>
<pol-items>
<PolicyInheritRule-list>
<name>pol</name>
<seq>1</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 100
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
inherit peer-policy pol 1
no unsuppress-map map1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Applying an AS-PATH Filter List to Incoming Routes
Applying an AS-PATH Filter List to Incoming Routes
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"rpmEntity": {
"children": [
{
"rtlistRule": {
"attributes": {
"name": "List_A"
},
"children": [
{
"rtlistEntry": {
"attributes": {
"action": "permit",
"order": "10",
"regex": "1"
}}}]}}]}},{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpFltrCtrlP": {
"attributes": {
"direction": "in",
"list": "List_A"
}}}]}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<rpm-items>
<accesslist-items>
<Rule-list>
<name>List_A</name>
<ent-items>
<Entry-list>
<order>10</order>
<action>permit</action>
<regex>1</regex>
</Entry-list>
</ent-items>
</Rule-list>
</accesslist-items>
</rpm-items>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<fltrctrl-items>
<FltrCtrlP-list>
<direction>in</direction>
<list>List_A</list>
</FltrCtrlP-list>
</fltrctrl-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
ip as-path access-list List_A seq 10 permit 1router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
filter-list List_A in
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Applying an AS-PATH Filter List to Outgoing Routes
Applying an AS-PATH Filter List to Outgoing Routes
POST http://<mgmt0_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"rpmEntity": {
"children": [
{
"rtlistRule": {
"attributes": {
"name": "List_A"
},
"children": [
{
"rtlistEntry": {
"attributes": {
"action": "permit",
"order": "10",
"regex": "1"
}}}]}}]}},{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpFltrCtrlP": {
"attributes": {
"direction": "out",
"list": "List_A"
}}}]}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<rpm-items>
<accesslist-items>
<Rule-list>
<name>List_A</name>
<ent-items>
<Entry-list>
<order>10</order>
<action>permit</action>
<regex>1</regex>
</Entry-list>
</ent-items>
</Rule-list>
</accesslist-items>
</rpm-items>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<fltrctrl-items>
<FltrCtrlP-list>
<direction>out</direction>
<list>List_A</list>
</FltrCtrlP-list>
</fltrctrl-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
ip as-path access-list List_A seq 10 permit 1router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
filter-list List_A out
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Applying a Prefix List to Incoming Routes
Applying a Prefix List to Incoming Routes
POST http://<mgmt0_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"rpmEntity": {
"children": [
{
"rtpfxRuleV4": {
"attributes": {
"name": "List_1"
},
"children": [
{
"rtpfxEntry": {
"attributes": {
"action": "permit",
"criteria": "exact",
"fromPfxLen": "0",
"order": "10",
"pfx": "4.3.2.1/3",
"toPfxLen": "0"
}}}]}}]}},{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpPfxCtrlP": {
"attributes": {
"direction": "in",
"list": "List_1"
}}}]}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<rpm-items>
<pfxlistv4-items>
<RuleV4-list>
<name>List_1</name>
<ent-items>
<Entry-list>
<order>10</order>
<action>permit</action>
<criteria>exact</criteria>
<fromPfxLen>0</fromPfxLen>
<pfx>4.3.2.1/3</pfx>
<toPfxLen>0</toPfxLen>
</Entry-list>
</ent-items>
</RuleV4-list>
</pfxlistv4-items>
</rpm-items>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<pfxctrl-items>
<PfxCtrlP-list>
<direction>in</direction>
<list>List_1</list>
</PfxCtrlP-list>
</pfxctrl-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
ip prefix-list List_1 seq 10 permit 4.3.2.1/3router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
prefix-list List_1 in
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Applying a Prefix List to Outgoing Routes
Applying a Prefix List to Outgoing Routes
POST http://<mgmt0_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"rpmEntity": {
"children": [
{
"rtpfxRuleV4": {
"attributes": {
"name": "List_1"
},
"children": [
{
"rtpfxEntry": {
"attributes": {
"action": "permit",
"criteria": "exact",
"fromPfxLen": "0",
"order": "10",
"pfx": "4.3.2.1/3",
"toPfxLen": "0"
}}}]}}]}},{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpPfxCtrlP": {
"attributes": {
"direction": "out",
"list": "List_1"
}}}]}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<rpm-items>
<pfxlistv4-items>
<RuleV4-list>
<name>List_1</name>
<ent-items>
<Entry-list>
<order>10</order>
<action>permit</action>
<criteria>exact</criteria>
<fromPfxLen>0</fromPfxLen>
<pfx>4.3.2.1/3</pfx>
<toPfxLen>0</toPfxLen>
</Entry-list>
</ent-items>
</RuleV4-list>
</pfxlistv4-items>
</rpm-items>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<pfxctrl-items>
<PfxCtrlP-list>
<direction>out</direction>
<list>List_1</list>
</PfxCtrlP-list>
</pfxctrl-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
ip prefix-list List_1 seq 10 permit 4.3.2.1/3router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
prefix-list List_1 out
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring to Advertise Only Active Routes to the Peer
Configuring to Advertise Only Active Routes to the Peer
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"ctrl": "suppress-inactive",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<ctrl>suppress-inactive</ctrl>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
suppress-inactive
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting the Configuration for Advertising Only Active Routes to the Peer
Deleting the Configuration for Advertising Only Active Routes to the Peer
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"ctrl": "",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<ctrl></ctrl>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no suppress-inactive
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Advertise Only Active Routes to the Peer (Values inherited from a Peer Template)
Advertise Only Active Routes to the Peer (Values inherited from a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"ctrl": "",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "Pol1",
"seq": "123"
}
}
}
]
}
}
]
}
},
{
"bgpPolicyCont": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"name": "Pol1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<ctrl></ctrl>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<pol-items>
<PolicyInheritRule-list>
<name>Pol1</name>
<seq>123</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
<policycont-items>
<PolicyCont-list>
<name>Pol1</name>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PolicyCont-list>
</policycont-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
template peer-policy Pol1
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
inherit peer-policy Pol1 123
default suppress-inactive
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring Receive Capability for Additional Paths
Configuring Receive Capability for Additional Paths
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"capAddlPaths": "recv",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<capAddlPaths>recv</capAddlPaths>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
capability additional-paths receive
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Disabling Receive Capability for Additional Paths
Disabling Receive Capability for Additional Paths
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"capAddlPaths": "recv-disable",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<capAddlPaths>recv-disable</capAddlPaths>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
capability additional-paths receive disable
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting Receive Capability for Additional Paths
Deleting Receive Capability for Additional Paths
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"capAddlPaths": "",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<capAddlPaths></capAddlPaths>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no capability additional-paths receive
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring Receive Capability for Additional Paths (Values inherited from a Peer Template)
Configuring Receive Capability for Additional Paths (Values inherited from a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"capAddlPaths": "",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "Pol1",
"seq": "123"
}
}
}
]
}
}
]
}
},
{
"bgpPolicyCont": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"name": "Pol1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<capAddlPaths></capAddlPaths>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<pol-items>
<PolicyInheritRule-list>
<name>Pol1</name>
<seq>123</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
<policycont-items>
<PolicyCont-list>
<name>Pol1</name>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PolicyCont-list>
</policycont-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
template peer-policy Pol1
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
inherit peer-policy Pol1 123
default capability additional-paths receive
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Third-Party Nexthop (If Possible)
Configuring a Third-Party Nexthop (If Possible)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"nhThirdparty": "enabled",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<nhThirdparty>enabled</nhThirdparty>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
next-hop-third-party
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Third-Party Nexthop
Deleting a Third-Party Nexthop
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"nhThirdparty": "disabled",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<nhThirdparty>disabled</nhThirdparty>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no next-hop-third-party
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Third-Party Nexthop (Values inherited from a Peer Template)
Configuring a Third-Party Nexthop (Values inherited from a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": "",
"peerImp": "peer"
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"nhThirdparty": "enabled",
"type": "ipv6-lucast"
},
"children": [
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "Pol1",
"seq": "123"
}
}
}
]
}
}
]
}
},
{
"bgpPolicyCont": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"name": "Pol1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<peerImp>peer</peerImp>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<nhThirdparty>enabled</nhThirdparty>
<pol-items>
<PolicyInheritRule-list>
<name>Pol1</name>
<seq>123</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
<policycont-items>
<PolicyCont-list>
<name>Pol1</name>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PolicyCont-list>
</policycont-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
template peer-policy Pol1
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
inherit peer-policy Pol1 123
default next-hop-third-party
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Route-Map to Selectively Unsuppress Suppressed Routes
Configuring a Route-Map to Selectively Unsuppress Suppressed Routes
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast",
"unSupprMap": "Map1"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<unSupprMap>Map1</unSupprMap>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
unsuppress-map Map1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Configuration that Selectively Unsuppress Suppressed Routes
Deleting a Configuration that Selectively Unsuppress Suppressed Routes
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast",
"unSupprMap": ""
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<unSupprMap></unSupprMap>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no unsuppress-map Map1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Route-Map to Selectively Unsuppress Suppressed Routes (Values inherited from a Peer Template)
Configuring a Route-Map to Selectively Unsuppress Suppressed Routes (Values inherited from a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast",
"unSupprMap": ""
},
"children": [
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "Pol1",
"seq": "123"
}
}
}
]
}
}
]
}
},
{
"bgpPolicyCont": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"name": "Pol1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<unSupprMap></unSupprMap>
<pol-items>
<PolicyInheritRule-list>
<name>Pol1</name>
<seq>123</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
<policycont-items>
<PolicyCont-list>
<name>Pol1</name>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PolicyCont-list>
</policycont-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
template peer-policy Pol1
neighbor 1.2.3.4 address-family ipv6 labeled-unicast inherit peer-policy Pol1 123 default unsuppress-map Map1 `
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Conditioned Route-Map to Advertise Only When Prefix in Condition Exists
Configuring a Conditioned Route-Map to Advertise Only When Prefix in Condition Exists
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpAdvtMap": {
"attributes": {
"condMap": "map1",
"condition": "exist",
"rtMap": "map1"
}}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<advtmap-items>
<condMap>map1</condMap>
<condition>exist</condition>
<rtMap>map1</rtMap>
</advtmap-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
advertise-map map1 exist-map map1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Conditioned Route-Map to Advertise Only When Prefix in Condition Exists
Deleting a Conditioned Route-Map to Advertise Only When Prefix in Condition Exists
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpAdvtMap": {
"attributes": {
"status": "deleted"
}}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<advtmap-items xc:operation="delete">
</advtmap-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no advertise-map map1 exist-map map1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Conditioned Route-Map to Advertise Only When Prefix in Condition Does Not Exist
Configuring a Conditioned Route-Map to Advertise Only When Prefix in Condition Does Not Exist
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpAdvtMap": {
"attributes": {
"condMap": "rtmap1",
"condition": "non-exist",
"rtMap": "map1"
}}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<advtmap-items>
<condMap>rtmap1</condMap>
<condition>non-exist</condition>
<rtMap>map1</rtMap>
</advtmap-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
advertise-map map1 non-exist-map rtmap1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Conditioned Route-Map to Advertise Only When Prefix in Condition Does Not Exist
Deleting a Conditioned Route-Map to Advertise Only When Prefix in Condition Does Not Exist
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpAdvtMap": {
"attributes": {
"status": "deleted"
}}}]}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<advtmap-items xc:operation="delete">
</advtmap-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no advertise-map map1 non-exist-map rtmap1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Route Map for Conditional Advertisement (Values inherited From a Peer Template)
Configuring a Route Map for Conditional Advertisement (Values inherited From a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpAdvtMap": {
"attributes": {
"status": "deleted"
}
}
},
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "Pol1",
"seq": "123"
}
}
}
]
}
}
]
}
},
{
"bgpPolicyCont": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"name": "Pol1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<advtmap-items xc:operation="delete">
</advtmap-items>
<pol-items>
<PolicyInheritRule-list>
<name>Pol1</name>
<seq>123</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
<policycont-items>
<PolicyCont-list>
<name>Pol1</name>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PolicyCont-list>
</policycont-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(2).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
template peer-policy Pol1
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
inherit peer-policy Pol1 123
default advertise-map
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Route Map to Specify Criteria for Originating the Default
Configuring a Route Map to Specify Criteria for Originating the Default
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"defOrg": "enabled",
"defOrgRtMap": "rtmap1",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<defOrg>enabled</defOrg>
<defOrgRtMap>rtmap1</defOrgRtMap>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
default-originate route-map rtmap1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Deleting a Configured Route Map to Specify Criteria for Originating the Default
Deleting a Configured Route Map to Specify Criteria for Originating the Default
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"defOrg": "disabled",
"defOrgRtMap": "rtmap1",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
}}}]}}]}}]}}]}}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<defOrg>disabled</defOrg>
<defOrgRtMap>rtmap1</defOrgRtMap>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
no default-originate route-map rtmap1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html
Configuring a Route Map to Specify Criteria for Originating the Default (Values inherited From a Peer Template)
Configuring a Route Map to Specify Criteria for Originating the Default (Values inherited From a Peer Template)
POST http://<mgmt0_IP>/api/mo/sys/bgp.json
{
"topSystem": {
"children": [
{
"bgpEntity": {
"children": [
{
"bgpInst": {
"attributes": {
"asn": "123"
},
"children": [
{
"bgpDom": {
"attributes": {
"name": "default"
},
"children": [
{
"bgpPeer": {
"attributes": {
"addr": "1.2.3.4",
"inheritContPeerCtrl": ""
},
"children": [
{
"bgpPeerAf": {
"attributes": {
"defOrg": "disabled",
"defOrgRtMap": "",
"inheritContPeerPolicyCtrl": "",
"type": "ipv6-lucast"
},
"children": [
{
"bgpPolicyInheritRule": {
"attributes": {
"name": "Pol1",
"seq": "123"
}
}
}
]
}
}
]
}
},
{
"bgpPolicyCont": {
"attributes": {
"inheritContPeerPolicyCtrl": "",
"name": "Pol1"
}
}
}
]
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System>
<bgp-items>
<inst-items>
<asn>123</asn>
<dom-items>
<Dom-list>
<name>default</name>
<peer-items>
<Peer-list>
<addr>1.2.3.4</addr>
<inheritContPeerCtrl></inheritContPeerCtrl>
<af-items>
<PeerAf-list>
<type>ipv6-lucast</type>
<defOrg>disabled</defOrg>
<defOrgRtMap></defOrgRtMap>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
<pol-items>
<PolicyInheritRule-list>
<name>Pol1</name>
<seq>123</seq>
</PolicyInheritRule-list>
</pol-items>
</PeerAf-list>
</af-items>
</Peer-list>
</peer-items>
<policycont-items>
<PolicyCont-list>
<name>Pol1</name>
<inheritContPeerPolicyCtrl></inheritContPeerPolicyCtrl>
</PolicyCont-list>
</policycont-items>
</Dom-list>
</dom-items>
</inst-items>
</bgp-items>
</System>
Note: This example was added in Release 7.0(3)I7(3).
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
router bgp 123
template peer-policy Pol1
neighbor 1.2.3.4
address-family ipv6 labeled-unicast
inherit peer-policy Pol1 123
default default-originate route-map rtmap1
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference: http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload: https://developer.cisco.com/media/dme/index.html
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html