Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)

Latest

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Configuring an ITD Service

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/itd/inst.json
{
  "itdInst": {
    "children": [
      {
        "itdService": {
          "attributes": {
            "name": "Service_Name"
}}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <itd-items>
    <inst-items>
      <service-items>
        <Service-list>
          <name>Service_Name</name>
        </Service-list>
      </service-items>
    </inst-items>
  </itd-items>
</System>

Configuring an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

itd Service_Name

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

The following table contains information about the itdService properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

no itd Service_Name

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Probe Source Interface

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
source-interface loopback 123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
sourceIntf	nw:IfId (base:IfIndex)	Source interface for probe generation.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Probe Source Interface

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no source-interface loopback 123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
sourceIntf	nw:IfId (base:IfIndex)	Source interface for probe generation.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring NAT Destination

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
nat destination

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
natDestination	itd:ctrlType (scalar:Enum8)	SELECTION: 0 - disable 1 - enable DEFAULT: disable

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting NAT Destination

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no nat destination

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
natDestination	itd:ctrlType (scalar:Enum8)	SELECTION: 0 - disable 1 - enable DEFAULT: disable

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring an ITD Service VRF

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
vrf SampleString_123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
vrf	itd:vrfName (string:Basic)	Identifies the VRF for the NTP providers	MAX SIZE: 32 DEFAULT: default

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an ITD Service VRF

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no vrf SampleString_123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
vrf	itd:vrfName (string:Basic)	Identifies the VRF for the NTP providers	MAX SIZE: 32 DEFAULT: default

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring an ITD Include Access List for a Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
access-list SampleString_123 device-group SampleString_123

Verifying a DME Configuration

MO	DN
itdAccesslist	sys/itd/inst/service-Service_Name/acl-SampleString_123
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdAccesslist Properties

The following table contains information about the itdAccesslist properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
deviceGroup	itd:DevGrpNameType (string:Basic)	Optional	MAX SIZE: 31
isIPv6	scalar:Bool	Must be true for ipv6 access-list	SELECTION: true or fals
name	itd:AclNameType (string:Basic)	The name of the object.	MAX SIZE: 50

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an ITD Include Access List for a Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no access-list SampleString_123 device-group SampleString_123

Verifying a DME Configuration

MO	DN
itdAccesslist	sys/itd/inst/service-Service_Name/acl-SampleString_123
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdAccesslist Properties

Property Name	Data Type	Description	Values
name	itd:AclNameType (string:Basic)	The name of the object.	MAX SIZE: 50
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring an IPv6 Include Access List for a Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
access-list ipv6 SampleString_123 device-group SampleString_123

Verifying a DME Configuration

MO	DN
itdAccesslist	sys/itd/inst/service-Service_Name/acl-SampleString_123
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdAccesslist Properties

Property Name	Data Type	Description	Values
deviceGroup	itd:DevGrpNameType (string:Basic)	MAX SIZE: 31
isIPv6	scalar:Bool	Must be true for ipv6 access-list	SELECTION: true or fals
name	itd:AclNameType (string:Basic)	The name of the object.	MAX SIZE: 50

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an IPv6 Include Access List for a Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no access-list ipv6 SampleString_123 device-group SampleString_123

Verifying a DME Configuration

MO	DN
itdAccesslist	sys/itd/inst/service-Service_Name/acl-SampleString_123
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdAccesslist Properties

Property Name	Data Type	Description	Values
name	itd:AclNameType (string:Basic)	The name of the object.	MAX SIZE: 50
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Specifying the Traffic to Exclude

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
exclude access-list SampleString_123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
excludeACL	itd:AclNameType (string:Basic)	MAX SIZE: 50
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configuration that Specifies the Traffic to Exclude

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no exclude access-list SampleString_123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
excludeACL	itd:AclNameType (string:Basic)	MAX SIZE: 50
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring ITD Failaction as Bucket Distribute for a Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
failaction bucket distribute

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting ITD Failaction as Bucket Distribute for a Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no failaction bucket distribute

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring ITD Failaction as Node Least-Bucket

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
failaction node least-bucket

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting ITD Failaction as Node Least-Bucket

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no failaction node least-bucket

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring ITD Failaction as Node Per Bucket

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
failaction node per-bucket

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting ITD Failaction as Node Per Bucket

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no failaction node per-bucket

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring ITD Failaction as Node Reassign

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
failaction node reassign

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting ITD Failaction as Node Reassign

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no failaction node reassign

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
failactionMode	itd:failactionType (scalar:Enum8)	SELECTION: 0 - nofailaction 1 - nodeReassign 2 - nodeLeastBucket 3 - nodePerBucket 4 - bucketDistribute DEFAULT: nofailaction
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring an Ethernet Interface as Ingress Interface for an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
ingress interface ethernet 1/2

Verifying a DME Configuration

MO	DN
itdIngressIf	sys/itd/inst/service-Service_Name/if-[eth1/2]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[po123]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[vlan123]
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdIngressIf Properties

The following table contains information about the itdIngressIf properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
name	nw:IfId (base:IfIndex)	The name of the object.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting an Ethernet Interface as Ingress Interface for an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no ingress interface ethernet 1/2

Verifying a DME Configuration

MO	DN
itdIngressIf	sys/itd/inst/service-Service_Name/if-[eth1/2]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[po123]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[vlan123]
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdIngressIf Properties

Property Name	Data Type	Description	Values
name	nw:IfId (base:IfIndex)	The name of the object.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a VLAN Interface as Ingress Interface for an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
ingress interface vlan 123

Verifying a DME Configuration

MO	DN
itdIngressIf	sys/itd/inst/service-Service_Name/if-[eth1/2]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[po123]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[vlan123]
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdIngressIf Properties

Property Name	Data Type	Description	Values
name	nw:IfId (base:IfIndex)	The name of the object.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a VLAN Interface as Ingress Interface for an ITD Service

Deleting a VLAN Interface as Ingress Interface for an ITD ServiceN)

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no ingress interface vlan 123

Verifying a DME Configuration

MO	DN
itdIngressIf	sys/itd/inst/service-Service_Name/if-[eth1/2]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[po123]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[vlan123]
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdIngressIf Properties

Property Name	Data Type	Description	Values
name	nw:IfId (base:IfIndex)	The name of the object.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a Port Channel Interface as Ingress Interface for an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
ingress interface port-channel 123

Verifying a DME Configuration

MO	DN
itdIngressIf	sys/itd/inst/service-Service_Name/if-[eth1/2]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[po123]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[vlan123]
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdIngressIf Properties

Property Name	Data Type	Description	Values
name	nw:IfId (base:IfIndex)	The name of the object.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a Port Channel Interface as Ingress Interface for an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no ingress interface port-channel 123

Verifying a DME Configuration

MO	DN
itdIngressIf	sys/itd/inst/service-Service_Name/if-[eth1/2]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[po123]
itdIngressIf	sys/itd/inst/service-Service_Name/if-[vlan123]
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

itdIngressIf Properties

Property Name	Data Type	Description	Values
name	nw:IfId (base:IfIndex)	The name of the object.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Destination-Based ITD Loadbalance Method

Note: This example was added in Release 9.3(1).

CLI Commands

itd test
load-balance method dst ip mask-position 2 buckets 32

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-test

itdService Properties

Property Name	Data Type	Description	Values
bucket	itd:BucketNumType (scalar:Uint32)	RANGE: [0 , 256] DEFAULT: 0
lbMethod	itd:LBMethod (scalar:Enum8)	SELECTION: 0 - noLBMethod 1 - src 2 - dst DEFAULT: noLBMethod
lbProtocol	itd:protocolType (scalar:Enum8)	SELECTION: TCP UDP IP DEFAULT: noProtocol
maskPosition	itd:MaskPosType (scalar:Uint32)	RANGE: [0 , 127] DEFAULT: 0
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
rangeX	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]
rangeY	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Destination-Based ITD Loadbalance Method

Note: This example was added in Release 9.3(1).

CLI Commands

itd test
no load-balance method dst ip mask-position 2 buckets 32

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-test

itdService Properties

Property Name	Data Type	Description	Values
bucket	itd:BucketNumType (scalar:Uint32)	RANGE: [0 , 256] DEFAULT: 0
lbMethod	itd:LBMethod (scalar:Enum8)	SELECTION: 0 - noLBMethod 1 - src 2 - dst DEFAULT: noLBMethod
lbProtocol	itd:protocolType (scalar:Enum8)	SELECTION: TCP UDP IP DEFAULT: noProtocol
maskPosition	itd:MaskPosType (scalar:Uint32)	RANGE: [0 , 127] DEFAULT: 0
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
rangeX	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]
rangeY	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Source-Based ITD Loadbalance Method (TCP)

Note: This example was added in Release 9.3(1).

CLI Commands

itd SampleString_123
load-balance method src ip-l4port tcp range 123 321 mask-position 123 buckets 32

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-SampleString_123

itdService Properties

Property Name	Data Type	Description	Values
bucket	itd:BucketNumType (scalar:Uint32)	RANGE: [0 , 256] DEFAULT: 0
lbMethod	itd:LBMethod (scalar:Enum8)	SELECTION: 0 - noLBMethod 1 - src 2 - dst DEFAULT: noLBMethod
lbProtocol	itd:protocolType (scalar:Enum8)	SELECTION: TCP UDP IP DEFAULT: noProtocol
maskPosition	itd:MaskPosType (scalar:Uint32)	RANGE: [0 , 127] DEFAULT: 0
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
rangeX	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]
rangeY	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Source-Based ITD Loadbalance Method (TCP)

Note: This example was added in Release 9.3(1).

CLI Commands

itd SampleString_123
no load-balance method src ip-l4port tcp range 123 321 mask-position 123 buckets 32

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-SampleString_123

itdService Properties

Property Name	Data Type	Description	Values
bucket	itd:BucketNumType (scalar:Uint32)	RANGE: [0 , 256] DEFAULT: 0
lbMethod	itd:LBMethod (scalar:Enum8)	SELECTION: 0 - noLBMethod 1 - src 2 - dst DEFAULT: noLBMethod
lbProtocol	itd:protocolType (scalar:Enum8)	SELECTION: TCP UDP IP DEFAULT: noProtocol
maskPosition	itd:MaskPosType (scalar:Uint32)	RANGE: [0 , 127] DEFAULT: 0
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
rangeX	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]
rangeY	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Source-Based ITD Loadbalance Method (UDP)

Note: This example was added in Release 9.3(1).

CLI Commands

itd SampleString_123
load-balance method src ip-l4port udp range 123 321 mask-position 123 buckets 32

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-SampleString_123

itdService Properties

Property Name	Data Type	Description	Values
bucket	itd:BucketNumType (scalar:Uint32)	RANGE: [0 , 256] DEFAULT: 0
lbMethod	itd:LBMethod (scalar:Enum8)	SELECTION: 0 - noLBMethod 1 - src 2 - dst DEFAULT: noLBMethod
lbProtocol	itd:protocolType (scalar:Enum8)	SELECTION: 0 - noProtocol 1 - DNS 2 - HTTP 3 - ICMP 4 - TCP 5 - UDP 6 - IP DEFAULT: noProtocol
maskPosition	itd:MaskPosType (scalar:Uint32)	RANGE: [0 , 127] DEFAULT: 0
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
rangeX	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]
rangeY	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting Source-Based ITD Loadbalance Method (UDP)

Note: This example was added in Release 9.3(1).

CLI Commands

itd SampleString_123
no load-balance method src ip-l4port udp range 123 321 mask-position 123 buckets 32

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-SampleString_123

itdService Properties

Property Name	Data Type	Description	Values
bucket	itd:BucketNumType (scalar:Uint32)	RANGE: [0 , 256] DEFAULT: 0
lbMethod	itd:LBMethod (scalar:Enum8)	SELECTION: 0 - noLBMethod 1 - src 2 - dst DEFAULT: noLBMethod
lbProtocol	itd:protocolType (scalar:Enum8)	SELECTION: TCP UDP IP DEFAULT: noProtocol
maskPosition	itd:MaskPosType (scalar:Uint32)	RANGE: [0 , 127] DEFAULT: 0
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
rangeX	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]
rangeY	address:PortNumber (scalar:Uint16)	RANGE: [0 , 65535]

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Peer Service Involved in Sandwich Mode

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
peer local service SampleString_123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
peerLocalServiceName	itd:SvcNameType (string:Basic)	The name of the peer service	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Peer Service Involved in Sandwich Mode

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no peer local service SampleString_123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
peerLocalServiceName	itd:SvcNameType (string:Basic)	The name of the peer service	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Disabling an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
shutdown

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
adminSt	itd:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 0 - shut 1 - no shut DEFAULT: shut
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Enabling an ITD Service

Note: This example was added in Release 9.3(1).

CLI Commands

itd Service_Name
no shutdown

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
adminSt	itd:AdminSt (scalar:Enum8)	The administrative state of the object or policy.	SELECTION: 0 - shut 1 - no shut DEFAULT: shut
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring a ITD Over VXLAN Probe Source-Interface

Note: This example was added in Release 9.3(3).

CLI Commands

itd Service_Name
source-interface loopback 123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
sourceIntf	nw:IfId (base:IfIndex)	Source interface for probe generation.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting a ITD Over VXLAN Probe Source-Interface

Note: This example was added in Release 9.3(3).

CLI Commands

itd Service_Name
no source-interface loopback 123

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdService	sys/itd/inst/service-Service_Name

itdService Properties

Property Name	Data Type	Description	Values
name	itd:SvcNameType (string:Basic)	The name of the object.	MAX SIZE: 31
sourceIntf	nw:IfId (base:IfIndex)	Source interface for probe generation.	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Verifying a DME Configuration

MO	DN
itdInst	sys/itd/inst
itdSessionDevGrp	sys/itd/inst/sessiondevgrp-Session_Name

itdSessionDevGrp Properties

The following table contains information about the itdSessionDevGrp properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
devGroupName	itd:DevGrpNameType (string:Basic)	MAX SIZE: 31
sessAction	itd:sessActionType (scalar:Enum8)	SELECTION: 0 - noAction 1 - commit 2 - abort DEFAULT: noAction

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:

https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html