Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference, Release 10.5(x)

Latest

Cisco Nexus 3000 and 9000 Series NX-API REST Documentation

Configuring the Source Interface Feature for the FTP Client

DME

YANG

Copy
POST http://<mgmt0_IP>/api/mo/sys/ipSrcIf.json
{
  "srcintfEntity": {
    "children": [
      {
        "srcintfFtp": {
          "attributes": {
            "srcIf": "vlan123",
            "vrf": "default"
}}}]}}
Response
{
    imdata:[]
}

Copy
<System>
  <ipSrcIf-items>
    <ftp-items>
      <Ftp-list>
        <vrf>default</vrf>
        <srcIf>vlan123</srcIf>
      </Ftp-list>
    </ftp-items>
  </ipSrcIf-items>
</System>

Configuring the Source Interface Feature

The source-interface command option provides support for management applications to configure an IPv4 and/or IPv6 inband or outband source IP address for the copy command and other processes (such as tacacs, ntp, ping/ping6, icmp-error and traceroute).

For more information, see the Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-installation-and-configuration-guides-list.html/

Configuring the Source Interface Feature for the FTP Client

Note: This example was added in Release 9.3(1).

CLI Commands

The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.

ip ftp source-interface vlan 123

Verifying a DME Configuration

The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfFtp	sys/ipSrcIf/ftp-[default]
srcintfFtp	sys/ipSrcIf/ftp-[SampleString_123]

srcintfFtp Properties

The following table contains information about the srcintfFtp properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configured Source Interface Feature for the FTP Client

Note: This example was added in Release 9.3(1).

CLI Commands

no ip ftp source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfFtp	sys/ipSrcIf/ftp-[default]
srcintfFtp	sys/ipSrcIf/ftp-[SampleString_123]

srcintfFtp Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Source Interface Feature for the FTP Client With a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

ip ftp source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfFtp	sys/ipSrcIf/ftp-[default]
srcintfFtp	sys/ipSrcIf/ftp-[SampleString_123]

srcintfFtp Properties

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configured Source Interface Feature for the FTP Client With a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

no ip ftp source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfFtp	sys/ipSrcIf/ftp-[default]
srcintfFtp	sys/ipSrcIf/ftp-[SampleString_123]

srcintfFtp Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Source Interface Feature For Traceroute

Note: This example was added in Release 9.3(1).

CLI Commands

ip traceroute source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTraceroute	sys/ipSrcIf/traceroute-[default]
srcintfTraceroute	sys/ipSrcIf/traceroute-[SampleString_123]

srcintfTraceroute Properties

The following table contains information about the srcintfTraceroute properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source Interface Feature for Traceroute

Note: This example was added in Release 9.3(1).

CLI Commands

no ip traceroute source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTraceroute	sys/ipSrcIf/traceroute-[default]
srcintfTraceroute	sys/ipSrcIf/traceroute-[SampleString_123]

srcintfTraceroute Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Source Interface Feature For Traceroute with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

ip traceroute source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTraceroute	sys/ipSrcIf/traceroute-[default]
srcintfTraceroute	sys/ipSrcIf/traceroute-[SampleString_123]

srcintfTraceroute Properties

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source Interface Feature for Traceroute with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

no ip traceroute source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTraceroute	sys/ipSrcIf/traceroute-[default]
srcintfTraceroute	sys/ipSrcIf/traceroute-[SampleString_123]

srcintfTraceroute Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Source Interface Feature For Domain-Lookup (Telnet)

Note: This example was added in Release 9.3(1).

CLI Commands

ip telnet source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTelnet	sys/ipSrcIf/telnet-[default]
srcintfTelnet	sys/ipSrcIf/telnet-[SampleString_123]

srcintfTelnet Properties

The following table contains information about the srcintfTelnet properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source Interface Feature for a Domain-Lookup (SSH)

Note: This example was added in Release 9.3(1).

CLI Commands

no ip telnet source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTelnet	sys/ipSrcIf/telnet-[default]
srcintfTelnet	sys/ipSrcIf/telnet-[SampleString_123]

srcintfTelnet Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring Source Interface Feature For Domain-Lookup (Telnet) with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

ip telnet source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTelnet	sys/ipSrcIf/telnet-[default]
srcintfTelnet	sys/ipSrcIf/telnet-[SampleString_123]

srcintfTelnet Properties

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

no ip telnet source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfTelnet	sys/ipSrcIf/telnet-[default]
srcintfTelnet	sys/ipSrcIf/telnet-[SampleString_123]

srcintfTelnet Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Source Interface Feature for a Domain-Lookup (SSH)

Note: This example was added in Release 9.3(1).

CLI Commands

ip ssh source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfSsh	sys/ipSrcIf/ssh-[default]
srcintfSsh	sys/ipSrcIf/ssh-[SampleString_123]

srcintfSsh Properties

The following table contains information about the srcintfSsh properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source Interface Feature for a Domain-Lookup (SSH)

Note: This example was added in Release 9.3(1).

CLI Commands

no ip ssh source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfSsh	sys/ipSrcIf/ssh-[default]
srcintfSsh	sys/ipSrcIf/ssh-[SampleString_123]

srcintfSsh Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Source Interface Feature for a Domain-Lookup (SSH) with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

ip ssh source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfSsh	sys/ipSrcIf/ssh-[default]
srcintfSsh	sys/ipSrcIf/ssh-[SampleString_123]

srcintfSsh Properties

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Source Interface Feature for a Domain-Lookup (SSH) (SSH) with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

no ip ssh source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfSsh	sys/ipSrcIf/ssh-[default]
srcintfSsh	sys/ipSrcIf/ssh-[SampleString_123]

srcintfSsh Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Source Interface Feature for the Ping Client

Note: This example was added in Release 9.3(1).

CLI Commands

ip ping source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfPing	sys/ipSrcIf/ping-[default]
srcintfPing	sys/ipSrcIf/ping-[SampleString_123]

srcintfPing Properties

The following table contains information about the srcintfPing properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configured Source Interface Feature For Ping Client

Note: This example was added in Release 9.3(1).

CLI Commands

no ip ping source-interface vlan 123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfPing	sys/ipSrcIf/ping-[default]
srcintfPing	sys/ipSrcIf/ping-[SampleString_123]

srcintfPing Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Configuring the Source Interface Feature for the Ping Client with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

ip ping source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfPing	sys/ipSrcIf/ping-[default]
srcintfPing	sys/ipSrcIf/ping-[SampleString_123]

srcintfPing Properties

Property Name	Data Type	Description	Values
srcIf	nw:IfId (base:IfIndex)	Traceroute Source Interface	Must match first field in the output of `show intf brief`. Example: Eth1/1 or Vlan100
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html

Deleting the Configured Source Interface Feature For Ping Client with a VRF

Note: This example was added in Release 9.3(1).

CLI Commands

no ip ping source-interface vlan 123 vrf SampleString_123

Verifying a DME Configuration

MO	DN
srcintfEntity	sys/ipSrcIf
srcintfPing	sys/ipSrcIf/ping-[default]
srcintfPing	sys/ipSrcIf/ping-[SampleString_123]

srcintfPing Properties

Property Name	Data Type	Description	Values
status	mo:ModificationStatus (scalar:Bitmask32)	Modification status	SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced
vrf	l3:VrfName (string:Basic)	Traceroute Source VRF	A sequence of characters

Related Documentation

For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:

http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-command-reference-list.html

For detailed information about classes and attributes in the payload, see the NX-API DME Model Reference: https://developer.cisco.com/media/dme/index.html

For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide:

https://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/products-programming-reference-guides-list.html