Configuring vrf
Configuring vrf
POST http://<mgmt_IP>/api/mo/sys.json
{
"topSystem": {
"children": [
{
"eigrpEntity": {
"children": [
{
"eigrpInst": {
"attributes": {
"name": "router_1"
},
"children": [
{
"eigrpDom": {
"attributes": {
"name": "vrf_name"
}
}
}
]
}
}
]
}
}
]
}
}
{
imdata:[]
}
<System xmlns="http://cisco.com/ns/yang/cisco-nx-os-device">
<eigrp-items>
<inst-items>
<Inst-list>
<name>router_1</name>
<dom-items>
<Dom-list>
<name>vrf_name</name>
</Dom-list>
</dom-items>
</Inst-list>
</inst-items>
</eigrp-items>
</System>
CLI Commands
The CLI commands are equivalent to the payload examples displayed in the pane on the right. Click the DME tab in the top-left corner of the right pane to view the JSON payload. Click the YANG tab to view the XML payload.
vrf vrf_name
Note: The property information for this example was added in release 10.2(2)F.
Verifying a DME Configuration
The following table contains the distinguished name (DN) for each managed object (MO) in the DME payload. Issue a GET request using the DN to verify the configuration was posted or to get information about the configured properties of a particular object.
| MO | DN |
|---|---|
| eigrpDom | sys/eigrp/inst-eigrp-ptag/dom-vrf-name |
eigrpDom Properties
The following table contains information about the eigrpDom properties in the DME payload. For more information about the properties and MOs, see the NX-API DME Model Reference linked in the Related Documentation section below.
| Property Name | Data Type | Values | Description |
|---|---|---|---|
| Name | naming: Name | MAX SIZE: 32 | Name of the VRF under router instance |
Related Documentation
For other CLI options, see the Cisco Nexus 9000 Series NX-OS Command Reference:
See the NX-API DME Model Reference for detailed information about classes and attributes described in the payload:
https://developer.cisco.com/site/nx-os/docs/nexus-model-reference/
For information about using the payloads, see the Cisco Nexus 9000 Series NX-OS Programmability Guide: