New and Changed Information
This section provides release-specific information for each new and changed feature.
Release 9.3(1)
-
- Applying Query Scoping Filters
- Querying by Target (Self)
- Querying by Target (Children)
- Querying by Filter String
- Querying by Target Tree (Running)
- Querying by Target Tree (Candidate)
- Querying by Target Tree (Applied)
- Querying to Include Hidden Properties
- Querying the Depth of Subtree in Response
- Querying the Depth of Ancestor in Response
- Querying to Show No Tree in Response
- Querying to Show Only Children in Response
- Querying to Show Full Tree in Response
- Querying to Turn on Matching Only in Response
- Querying to Include Tasks in Response
- Querying to Include Faults in Response
- Querying to Include Health in Response
- Querying to Include Stats in Response
- Querying to Include Relations in Response
- Querying to Include Relations With the Parent in Response
- Querying to Include Record Subtree in Response
- Querying to Include No Scoping in Response
- Querying to Include Record Subtree in Response
- Querying to Include Fault Records in Response
- Querying to Include Deployment in Response
- Querying to Include Port Deployment in Response
- Querying to Include Health Records in Response
- Querying to Include Audit Logs in Response
- Querying to Include Event Logs in Response
- Querying to Include Required in Response
- Querying to Include Count in Response
- Querying to Include Fault Count in Response
- Querying to Include Properties in Response (All)
- Querying to Include Properties in Response (Naming Only)
- Querying to Include Properties in Response (Config Only)
- Querying to Include Properties in Response (Set Config Only)
- Querying to Include Properties in Response (Nondefault Config Only)
- Querying a Subtree Filter String
- Querying a Foreign Subtree (None)
- Querying a Foreign Subtree (Applied Config)
- Querying a Foreign Subtree (Ephemeral)
- Querying to Keep the Property Type
- Querying by Batch Id
- Querying by Batch Size
- query-target={self | children | subtree}
- target-subtree-class=mo-class1[,mo-class2]...
- query-target-filter=filter-expression
- rsp-subtree={no | children | full}
- rsp-subtree-class=mo-class
- rsp-subtree-filter=filter-expression
- rsp-subtree-include=category1[,category2...][option]
- rsp-prop-include={all | naming-only | config-only}
- Applying Query Scoping Filters
Querying ARP, Adjacency Statistics, and Tables
- Requesting IPv6 Adjacency Subnet Prefix Information
- Requesting IPv6 Adjacency Aggregate Prefix Information
-
- Configuring COS for ARP Packets
- Deleting COS for ARP Packets
- Configuring an EVPN ARP Timeout
Configuring an IPv4 Unicast Address Family
- Delaying Initial Bestpath Until Redistribution IGPs Have Converged
- Deleting the Configuration for Delaying Initial Bestpath Until Redistribution IGPs Have Converged
Configuring an IPv4 Unicast Subaddress Family for a Peer Template
- Disabling Route Advertisement with Local Label to Peer (For a Peer Template)
Configuring an IPv6 Unicast Address Family
- Delaying Initial Bestpath Until Redistribution IGPs Have Converged
- Deleting the Configuration for Delaying Initial Bestpath Until Redistribution IGPs Have Converged
Configuring an IPv4 Unicast Subaddress Family Under a BGP Neighbor (IP Address)
- Configuring Route Advertisement with Local Label to Peer
- Deleting Route Advertisement with Local Label to Peer
Configuring a VPNv4 Unicast Address Family
- Configuring Allocation for Option B Labels
- Deleting Allocation for Option B Labels
Configuring a VPNv6 Unicast Address Family
- Configuring Allocation for Option B Labels
- Deleting Allocation for Option B Labels
Configuring an IPv4 Unicast Subaddress Family Under a VRF
- Delaying Initial Bestpath Until Redistribution IGPs Have Converged
- Deleting the Configuration for Delaying Initial Bestpath Until Redistribution IGPs Have Converged
- Configuring VRF Export to Allow Re-Importation of VPN Imported Routes
- Deleting VRF Export to Allow Re-Importation of VPN Imported Routes
- Configuring VRF Import to Allow Leaked Routes to be Advertised to VPN
- Deleting VRF Import to Allow Leaked Routes to be Advertised to VPN
Configuring an IPv6 Unicast Subaddress Family Under a VRF
- Delaying Initial Bestpath Until Redistribution IGPs Have Converged
- Deleting the Configuration for Delaying Initial Bestpath Until Redistribution IGPs Have Converged
- Configuring VRF Export to Allow Re-Importation of VPN Imported Routes
- Deleting VRF Export to Allow Re-Importation of VPN Imported Routes
- Configuring VRF Import to Allow Leaked Routes to be Advertised to VPN
- Deleting VRF Import to Allow Leaked Routes to be Advertised to VPN
- Configuring VRF Import to Allow Leaked Routes to be Advertised to VPN
- Deleting VRF Import to Allow Leaked Routes to be Advertised to VPN
-
- Configuring Index Allocation
- Deleting the Index Allocation Configuration
Configuring an IPv4 MVPN Address Family
- Configuring Forward Packets Over Multipath Paths
- Deleting Forward Packets Over Multipath Paths
- Configuring Multipath for IBGP Paths
- Deleting Multipath for IBGP Paths
Configuring an IPv6 MVPN Address Family
- Configuring Forward Packets Over Multipath Paths
- Deleting Forward Packets Over Multipath Paths
- Configuring Multipath for IBGP Paths
- Deleting Multipath for IBGP Paths
-
- Configuring the Default Route for Nexthop Address Resolution
- Deleting the Default Route for Nexthop Address Resolution
- Configuring the Socket History Buffer Size
- Deleting the Socket History Buffer Size
- Configuring the Socket History Buffer Size as Disable
- Deleting the Socket History Buffer Size as Disable
- Configuring the Socket History Buffer Size as Small
- Deleting the Socket History Buffer Size as Small
- Configuring the Socket History Buffer Size as Medium
- Deleting the Socket History Buffer Size as Medium
- Configuring the Socket History Buffer Size as Large
- Deleting the Socket History Buffer Size as Large
Configuring a Peer-Policy Template
- Disabling Route Advertisement with Local Label to Peer (For a Peer Policy Template)
-
- Enabling Call Home
- Disabling Call Home
- Configuring the Throttling of Duplicate Call Home Alert Messages
- Disabling the Throttling of Duplicate Call Home Alert Messages
- Configuring the Customer Service Contract Id
- Deleting the Customer Service Contract Id
- Configuring the Customer Id
- Deleting the Customer Id
- Configuring the Email Address of the Contact Person
- Deleting the Email Address of the Contact Person
- Configuring the Phone Number of the Contact Person
- Deleting the Phone Number of the Contact Person
- Configuring the Site Id of the Network Where the Switch is Deployed
- Deleting the Site Id of the Network Where the Switch is Deployed
- Configuring the Replacement Part Shipping Address
- Deleting the Replacement Part Shipping Address
- Configuring the Switch Priority
- Deleting the Switch Priority
Configuring Call Home Alert Groups
- Configuring a CLI Command for an Alert Group for Configuration Events
- Deleting a CLI Command for an Alert Group for Configuration Events
- Configuring a CLI Command for an Alert Group for Diagnostic Events
- Deleting a CLI Command for an Alert Group for Diagnostic Events
- Configuring a CLI Command for an Alert Group for Power, Fan, and Temperature Related Events
- Deleting a CLI Command for an Alert Group for Power, Fan, and Temperature Related Events
- Configuring a CLI Command for an Alert Group for Inventory Status Events
- Deleting a CLI Command for an Alert Group for Inventory Status Events
- Configuring a CLI Command for an Alert Group for Events Related to Licensing
- Deleting a CLI Command for an Alert Group for Events Related to Licensing
- Configuring a CLI Command for an Alert Group for Linecard Related Events
- Deleting a CLI Command for an Alert Group for Linecard Related Events
- Configuring a CLI Command for an Alert Group for Supervisor Related Events
- Deleting a CLI Command for an Alert Group for Supervisor Related Events
- Configuring a CLI Command for an Alert Group for Events Related to Syslog Messages Filled by Port Manager
- Deleting a CLI Command for an Alert Group for Events Related to Syslog Messages Filled by Port Manager
- Configuring a CLI Command for an Alert Group for Software Related Events
- Deleting a CLI Command for an Alert Group for Software Related Events
- Configuring a CLI Command for an Alert Group for User-Generated Test Events
- Deleting a CLI Command for an Alert Group for User-Generated Test Events
Configuring a Destination Profile For Plain Text Messages
- Configuring the Alert Group for All Call Home Messages
- Deleting the Alert Group for All Call Home Messages
- Configuring the Alert Group for Cisco TAC Only Events
- Deleting the Alert Group for Cisco TAC Only Events
- Configuring the Alert Group for Configuration Related Events
- Deleting the Alert Group for Configuration Related Events
- Configuring the Alert Group for Diagnostic Related Events
- Deleting the Alert Group for Diagnostic Related Events
- Configuring the Alert Group for EEM Events
- Deleting the Alert Group for EEM Events
- Configuring the Alert Group for Power, Fan, and Temperature Related Events
- Deleting the Alert Group for Power, Fan, and Temperature Related Events
- Configuring a Destination Profile for Plain Text Messages and Adding an HTTP or HTTPS URL
- Deleting a Destination Profile for Plain Text Messages and Adding an HTTP or HTTPS URL
- Configuring the Alert Group for Inventory Status Events
- Deleting the Alert Group for Inventory Status Events
- Configuring the Alert Group for Licensing Related Events
- Deleting the Alert Group for Licensing Related Events
- Configuring the Alert Group for Line Card Related Events
- Deleting the Alert Group for Line Card Related Events
- Configuring the Alert Group for Supervisor Related Events
- Deleting the Alert Group for Supervisor Related Events
- Configuring the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Deleting the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Configuring the Alert Group for Software Related Events
- Deleting the Alert Group for Software Related Events
- Configuring the Alert Group for User Generated Test Events
- Configuring a Destination Profile for Plain Text Messages and an Index for Email Id
- Deleting a Destination Profile for Plain Text Messages and an Index for Email Id
- Deleting the Alert Group for User Generated Test Events
- Configuring the Call Home Message Level
- Configuring the Maximum Message Size
- Configuring the Transport Method for Email
- Deleting the Transport Method for Email
- Configuring the Transport Method for HTTP URLs
- Deleting the Transport Method for HTTP URLs
Configuring a Destination Profile For Short Text Messages
- Configuring the Alert Group for All Call Home Messages
- Deleting the Alert Group for All Call Home Messages
- Configuring the Alert Group for Cisco TAC Only Events
- Deleting the Alert Group for Cisco TAC Only Events
- Configuring the Alert Group for Configuration Related Events
- Deleting the Alert Group for Configuration Related Events
- Configuring the Alert Group for Diagnostic Related Events
- Deleting the Alert Group for Diagnostic Related Events
- Configuring the Alert Group for EEM Events
- Deleting the Alert Group for EEM Events
- Configuring the Alert Group for Power, Fan, and Temperature Related Events
- Deleting the Alert Group for Power, Fan, and Temperature Related Events
- Configuring the Alert Group for Inventory Status Events
- Deleting the Alert Group for Inventory Status Events
- Configuring the Alert Group for Licensing Related Events
- Deleting the Alert Group for Licensing Related Events
- Configuring the Alert Group for Line Card Related Events
- Deleting the Alert Group for Line Card Related Events
- Configuring the Alert Group for Supervisor Related Events
- Deleting the Alert Group for Supervisor Related Events
- Configuring the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Deleting the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Configuring the Alert Group for Software Related Events
- Deleting the Alert Group for Software Related Events
- Configuring the Alert Group for User Generated Test Events
- Deleting the Alert Group for User Generated Test Events
- Configuring a Destination Profile for Short Text Messages and an Index for an Email Id
- Deleting a Destination Profile for Short Text Messages and an Index for an Email Id
- Configuring a Destination Profile for Short Text Messages and Adding an HTTP or HTTPS URL
- Deleting a Destination Profile for Short Text Messages and Adding an HTTP or HTTPS URL
- Configuring the Call Home Message Level
- Configuring the Maximum Message Size
- Configuring the Transport Method for Email
- Deleting the Transport Method for Email
- Configuring the Transport Method for HTTP URLs
- Deleting the Transport Method for HTTP URLs
Configuring a Destination Profile for XML Messages
- Configuring the Alert Group to All Call Home Messages
- Deleting the Alert Group to All Call Home Messages
- Configuring the Alert Group for Cisco TAC Only Events
- Deleting the Alert Group for Cisco TAC Only Events
- Configuring the Alert Group for Configuration Related Events
- Deleting the Alert Group for Configuration Related Events
- Configuring the Alert Group for Diagnostic Related Events
- Deleting the Alert Group for Diagnostic Related Events
- Configuring the Alert Group for EEM Events
- Deleting the Alert Group for EEM Events
- Configuring the Alert Group for Power, Fan, and Temperature Related Events
- Deleting the Alert Group for Power, Fan, and Temperature Related Events
- Configuring the Alert Group for Inventory Status Events
- Deleting the Alert Group for Inventory Status Events
- Configuring the Alert Group for Licensing Related Events
- Deleting the Alert Group for Licensing Related Events
- Configuring the Alert Group for Line Card Related Events
- Deleting the Alert Group for Line Card Related Events
- Configuring the Destination Profile for XML Messages and an Index for an Email Id
- Deleting the Destination Profile for XML Messages and an Index for an Email Id
- Configuring a Destination Profile for XML Messages and Adding an HTTP or HTTPS URL
- Deleting a Destination Profile for XML Messages and Adding an HTTP or HTTPS URL
- Configuring the Call Home Message Level
- Configuring the Call Home Message Size
- Configuring the Alert Group for Supervisor Related Events
- Deleting the Alert Group for Supervisor Related Events
- Configuring the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Deleting the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Configuring the Alert Group for Software Related Events
- Deleting the Alert Group for Software Related Events
- Configuring the Alert Group for User Generated Test Events
- Deleting the Alert Group for User Generated Test Events
- Configuring the Email Transport Method for Predef Profile
- Deleting the Email Transport Method for Predef Profile
- Configuring the Transport Method for HTTP
- Deleting the Transport Method for HTTP
-
- Configuring an SMTP Server
- Deleting an SMTP Server
- Configuring an SMTP Server (IPv6)
- Deleting an SMTP Server Configuration (IPv6)
- Configuring the Email Transport
- Deleting the Email Transport
- Configuring the Reply-to Email Address
- Deleting the Reply-to Email Address
- Configuring the Email Transport for an SMTP Server
- Deleting the Email Transport for an SMTP Server
- Configuring a VRF Name for the Email Transport Configuration
- Configuring a VRF Name for the Email Transport Configuration (IPv6)
- Configuring a From Email Address
- Deleting a From Email Address
- Configuring a Reply-To Email Address
- Deleting a Reply-To Email Address
Configuring an HTTP Proxy Server
- Enabling Usage of Proxy Server for Messages Sent Over HTTP(S)
- Disabling Usage of Proxy Server for Messages Sent Over HTTP(S)
- Configuring the Proxy Server Address and Port
- Deleting the Proxy Server Address and Port
- Configuring the VRF Name for the HTTP URL Transport Option
- Deleting the VRF Name for the HTTP URL Transport Option
Configuring Periodic Inventory Notifications
- Configuring the Periodic Software Inventory Message Dispatch
- Disabling Periodic Software Inventory Message Dispatch
- Configuring the Time Period for Periodic Inventory
- Disabling the Periodic Inventory notification
- Configuring the Time-of-Day for Periodic Inventory
- Disabling the Periodic Inventory Notification
Configuring a User Defined Destination Profile
- Configuring a Destination Profile with an Email Id Index
- Deleting a Destination Profile with an Email Id Index
- Configuring an Index for Email Id and Adding an HTTP or HTTPS URL
- Deleting an Index for Email Id and Adding an HTTP or HTTPS URL
- Configuring a Destination Profile
- Deleting a Destination Profile
- Configuring a Call Home Message Level
- Configuring the Maximum Message Size
- Configuring the Email Transport Method for a Given Profile
- Configuring the Email Transport Method for a Given Profile
- Configuring the HTTP Transport Method
- Deleting the HTTP Transport Method
- Configuring an Alert Group for All Call Home Messages
- Configuring the Alert Group for Cisco TAC Only Events
- Configuring the Alert Group for Configuration Related Events
- Configuring the Alert Group for Diagnostic Related Events
- Configuring the Alert Group for EEM Events
- Configuring the Alert Group for Power, Fan, and Temperature Related Events
- Configuring the Alert Group for Inventory Status Events
- Configuring the Alert Group for Licensing Related Events
- Configuring the Alert Group for Line Card Related Events
- Configuring the Alert Group for Supervisor Related Events
- Configuring the Alert Group for Events Related to Syslog Messages Filed by Port Manager
- Configuring the Alert Group for Software Related Events
- Configuring the Alert Group for User Generated Test Events
- Configuring Plain Text Message Format
- Deleting the Plain Text Message Format Configuration
- Configuring Short Text Message Format
- Deleting the Short Text Message Format Configuration
- Configuring XML Text Message Format
- Deleting the XML Text Message Format Configuration
- Configuring the Banner Message
- Deleting the Banner Exec Message
-
- Specifying a Command Alias
- Deleting a Command Alias
Configuring a System Module Action
- Configuring Shutdown as the Module Action on Failure
- Deleting Shutdown as the Module Action on Failure
Configuring an Ethernet Interface Range
- Configuring Extra Buffers for this Interface
- Deleting Extra Buffers for this Interface
- Disabling Loop-Free Detection
- Unconfiguring Disabled Loop-Free Detection
- Configuring Interface Throughput Delay
- Deleting Interface Throughput Delay
- Configuring Audo MDIX Mode
- Deleting Audo MDIX Mode
- Configuring a Description
- Deleting a Description
- Configuring Default EtherType for 802.1q Frames
- Deleting Default EtherType for 802.1q Frames
Configuring an Ethernet Interface
- Configuring DFE Tuning Delay
- Deleting DFE Tuning Delay
- Configuring Audo MDIX Mode
- Deleting Audo MDIX Mode
- Configuring a Description
- Deleting a Description
- Configuring Outside Nat Interface
- Deleting Outside Nat Interface
- Configuring Inside Nat Interface
- Deleting Inside Nat Interface
- Configuring IPv6 Stateless Address Autoconfig (For SLAAC)
- Deleting IPv6 Stateless Address Autoconfig (For SLAAC)
Configuring an Ethernet Interface (Nonmember)
- Disabling Loop-Free Detection
- Deleting Disabled Loop-Free Detection
- Configuring Default EtherType for 802.1q Frames
- Deleting Default EtherType for 802.1q Frames
- Configuring Extra Buffers for this Interface
- Deleting Extra Buffers for this Interface
- Configuring Interface Throughput Delay
- Deleting Interface Throughput Delay
Configuring an Ethernet Point-to-Point Interface
- Configuring a Description
- Deleting a Description
- Configuring Interface Throughput Delay
- Deleting Interface Throughput Delay
Configuring the Source Interface Feature (Ethernet Interface)
- Configuring the Source Interface Feature for the FTP Client
- Deleting the Configured Source Interface Feature for the FTP Client
- Configuring the Source Interface Feature for the FTP Client With a VRF
- Deleting the Configured Source Interface Feature for the FTP Client With a VRF
- Configuring the Source Interface Feature for the Ping Client
- Deleting the Configured Source Interface Feature For Ping Client
- Configuring the Source Interface Feature for the Ping Client with a VRF
- Deleting the Configured Source Interface Feature For Ping Client with a VRF
- Configuring the Source Interface Feature for a Domain-Lookup (SSH)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring Source Interface Feature For Domain-Lookup (Telnet)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring Source Interface Feature For Domain-Lookup (Telnet) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring Source Interface Feature For Traceroute
- Deleting the Source Interface Feature for Traceroute
- Configuring Source Interface Feature For Traceroute with a VRF
- Deleting the Source Interface Feature for Traceroute with a VRF
Configuring an Ethernet Subinterface
- Configuring a Description
- Deleting a Description
- Configuring IEEE 802.1Q Virtual LAN
- Deleting IEEE 802.1Q Virtual LAN
Configuring a Loopback Interface
- Configuring a Description
- Deleting a Description
Configuring the Source Interface Feature (Loopback Interface)
- Configuring the Source Interface Feature for the FTP Client
- Deleting the Configured Source Interface Feature for the FTP Client
- Configuring the Source Interface Feature for the FTP Client With a VRF
- Deleting the Configured Source Interface Feature for the FTP Client With a VRF
- Configuring Source Interface Feature For Traceroute
- Deleting the Source Interface Feature for Traceroute
- Configuring Source Interface Feature For Traceroute with a VRF
- Deleting the Source Interface Feature for Traceroute with a VRF
- Configuring Source Interface Feature For Domain-Lookup (Telnet)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring Source Interface Feature For Domain-Lookup (Telnet) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature for a Domain-Lookup (SSH)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature For Ping Client
- Deleting the Configured Source Interface Feature For Ping Client
- Configuring the Source Interface Feature for the Ping Client with a VRF
- Deleting the Configured Source Interface Feature For Ping Client with a VRF
-
- Configuring a Description
- Deleting a Description
- Configuring IPv6 Stateless Address Autoconfig (For SLAAC)
- Deleting IPv6 Stateless Address Autoconfig (For SLAAC)
Configuring the Source Interface Feature (MGMT Interface)
- Configuring the Source Interface Feature for the FTP Client
- Deleting the Configured Source Interface Feature for the FTP Client
- Configuring the Source Interface Feature for the FTP Client With a VRF
- Deleting the Configured Source Interface Feature for the FTP Client With a VRF
- Configuring Source Interface Feature For Traceroute
- Deleting the Source Interface Feature for Traceroute
- Configuring Source Interface Feature For Traceroute with a VRF
- Deleting the Source Interface Feature for Traceroute with a VRF
- Configuring Source Interface Feature For Domain-Lookup (Telnet)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring Source Interface Feature For Domain-Lookup (Telnet) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature for a Domain-Lookup (SSH)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature for the Ping Client
- Deleting the Configured Source Interface Feature For Ping Client
- Configuring the Source Interface Feature for the Ping Client with a VRF
- Deleting the Configured Source Interface Feature For Ping Client with a VRF
-
- Creating a NAT Inside Source List With an Interface
- Deleting a NAT Inside Source List With an Interface
- Creating a NAT Inside Source List With Pool
- Deleting a NAT Inside Source List With Pool
- Overloading an Address Translation
- Deleting an Overloaded Address Translation
Configuring Network Address Translation (NAT)
- Configuring A Static Rule For Inside Local Address (TCP)
- Deleting A Static Rule For Inside Local Address (TCP)
- Configuring A Static Rule For Inside Local Address (UDP)
- Deleting A Static Rule For Inside Local Address (UDP)
- Configuring a Static Rule for Outside Global Address (TCP)
- Deleting a Static Rule for Outside Global Address (TCP)
- Configuring Translation Entries Creation Delay Due To Batching Before Program To TCAM
- Deleting Translation Entries Creation Delay Due To Batching Before Program To TCAM
- Configuring Sampling Timeout for NAT
- Deleting Sampling Timeout for NAT
- Configuring Timeout for NAT ICMP Flows
- Deleting Timeout for NAT ICMP Flows
- Configuring Timeout for NAT TCP Flows
- Deleting Timeout for NAT TCP Flows
- Configuring Timeout for NAT UDP Flows
- Deleting Timeout for NAT UDP Flows
- Specifying FINRST Timeout for NAT TCP Flows
- Deleting a Specified FINRST Timeout for NAT TCP flows
- Specifying FINRST Timeout as NEVER
- Deleting FINRST Timeout as NEVER
- Specifying Syn-Timeout for NAT TCP FLOWS
- Deleting Specified Syn-Timeout for NAT TCP FLOWS
Configuring NAT on an Ethernet Interface
- Configuring Outside Nat Interface
- Deleting Outside Nat Interface
- Configuring Inside Nat Interface
- Deleting Inside Nat Interface
- Configuring Inside Nat Interface in a Non-Default VRF
- Deleting a Configured Inside Nat Interface in a Non-Default VRF
Configuring an Outside Source List
- Configuring a NAT Outside Source List With Pool
- Deleting a NAT Outside Source List With Pool
Configuring NAT on a Port-Channel Interface
- Configuring Inside Nat Interface
- Deleting Inside Nat Interface
- Configuring Outside Nat Interface
- Deleting Outside Nat Interface
- Configuring Inside Nat Interface in a Non-Default VRF
- Deleting a Configured Inside Nat Interface in a Non-Default VRF
Configuring NAT on a Routed Interface
- Configuring Inside Nat Interface
- Deleting Inside Nat Interface
- Configuring Outside Nat Interface
- Deleting Outside Nat Interface
Configuring NAT on a VLAN Interface
- Configuring Outside Nat Interface
- Deleting Outside Nat Interface
Configuring a Port-Channel Interface Range
- Configuring a Description
- Deleting a Description
- Configuring Interface Throughput Delay
- Deleting Interface Throughput Delay
Configuring ECMP Load Balancing
- Configuring Universal Id to Randomize Hash Functions for Load Balancing
- Deleting Universal Id to Randomize Hash Functions for Load Balancing
Configuring a Port-Channel Subinterface
- Configuring a Description
- Deleting a Description
- Configuring a Description
- Deleting a Description
- Configuring a Description
- Deleting a Description
Configuring Port-Channel Parameters
- Configuring the Load-Defer Time Interval
- Deleting the Load-Defer Time Interval
- Configuring Port-Channel Hash-Distribution When Type Is Fixed
- Deleting Port-Channel Hash-Distribution When Type Is Fixed
- Configuring Port-Channel Hash-Distribution When Type Is Adaptive
- Deleting Port-Channel Hash-Distribution When Type Is Adaptive
- Configuring the Load Balance Resilient Mode
- Deleting the Load Balance Resilient Mode
Configuring the Source Interface Feature (Port-Channel Interface)
- Configuring the Source Interface Feature for the FTP Client
- Deleting the Configured Source Interface Feature for the FTP Client
- Configuring the Source Interface Feature for the FTP Client With a VRF
- Deleting the Configured Source Interface Feature for the FTP Client with a VRF
- Configuring Source Interface Feature For Traceroute
- Deleting the Source Interface Feature for Traceroute
- Configuring Source Interface Feature For Traceroute with a VRF
- Deleting the Source Interface Feature for Traceroute with a VRF
- Configuring Source Interface Feature For Domain-Lookup (Telnet)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring Source Interface Feature For Domain-Lookup (Telnet) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature for a Domain-Lookup (SSH)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature for the Ping Client
- Deleting the Configured Source Interface Feature For Ping Client
- Configuring the Source Interface Feature for the Ping Client with a VRF
- Deleting the Configured Source Interface Feature For Ping Client with a VRF
Configuring a Port-Channel Interface
- Configuring a Description
- Deleting a Description
- Configuring Extra Buffers for this Interface
- Deleting Extra Buffers for this Interface
- Configuring Default EtherType for 802.1q Frames
- Deleting Default EtherType for 802.1q Frames
- Enabling LACP Convergence For VPC Port Channels
- Disabling LACP Convergence For VPC Port Channels
- Configuring Disabling Loop-Free Detection
- Deleting Disabling Loop-Free Detection
- Configuring Interface Throughput Delay
- Deleting Interface Throughput Delay
-
- Configuring to Delete Adjacency On Mac Delete
- Deleting the Configuration to Delete Adjacency On Mac Delete
- Configuring the Boot-file-url Option
- Deleting the Boot-file-url Option Configuration
- Configuring to Disable Hardware Flooding
- Deleting the Configuration for Disabling Hardware Flooding
- Installing the Secondary Subnet Routes as Drop Routes
- Uninstalling the Secondary Subnet Routes as Drop Routes
- Enabling SVI Autostate for a VLAN Interface
- Disabling SVI Autostate for a VLAN Interface
Configuring the Source Interface Feature (VLAN Interface)
- Configuring the Source Interface Feature for the FTP Client
- Deleting the Configured Source Interface Feature for the FTP Client
- Configuring the Source Interface Feature for the FTP Client With a VRF
- Deleting the Configured Source Interface Feature for the FTP Client With a VRF
- Configuring Source Interface Feature For Traceroute
- Deleting the Source Interface Feature for Traceroute
- Configuring Source Interface Feature For Traceroute with a VRF
- Deleting the Source Interface Feature for Traceroute with a VRF
- Configuring Source Interface Feature For Domain-Lookup (Telnet)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring Source Interface Feature For Domain-Lookup (Telnet) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Configuring the Source Interface Feature for a Domain-Lookup (SSH)
- Deleting the Source Interface Feature for a Domain-Lookup (SSH)
- Configuring the Source Interface Feature for a Domain-Lookup (SSH) with a VRF
- Deleting the Source Interface Feature for a Domain-Lookup (SSH) (SSH) with a VRF
- Configuring the Source Interface Feature for the Ping Client
- Deleting the Configured Source Interface Feature For Ping Client
- Configuring the Source Interface Feature for the Ping Client with a VRF
- Deleting the Configured Source Interface Feature For Ping Client with a VRF
-
- Configuring BFD Multihop Session Parameters
- Deleting BFD Multihop Session Parameters
Configuring Hardware Profile Settings
- Configuring ECMP Resilient Mode
- Deleting ECMP Resilient Mode
-
- Configuring the Maximum Segment Size for TCP Connections in Bytes
- Deleting the Maximum Segment Size for TCP Connections in Bytes
-
- Configuring Delayed LACP on the Port Channel
- Deleting Delayed LACP on the Port Channel
- Configuring Delayed LACP on the Port Channel
- Deleting Delayed LACP on the Port Channel
Configuring Virtual Port Channels
- Configuring BPDU Version 2 Source MAC Address
- Deleting BPDU Version 2 Source MAC Address
- Configuring vPC Orphan Port Delay Bring-up Timer
- Deleting vPC Orphan Port Delay Bring-up Timer
- Configuring Keepalive with a Peer Switch on a vPC Domain (for IPv4)
- Configuring Keepalive with a Peer Switch on a vPC Domain (for IPv6)
-
- Configuring the Frequency in Seconds
- Configuring the Default Frequency
- Deleting the Frequency in Seconds
- Configuring the Owner of Entry
- Configuring the Default Owner
- Deleting the Owner of Entry
- Configuring a User-Defined Tag
- Configuring the Default User-Defined Tag
- Deleting a User-Defined Tag
- Configuring the Operation Threshold
- Configuring the Default Threshold
- Deleting the Operation Threshold
- Configuring the Timeout of an Operation
- Configuring the Default Timeout
- Deleting the Timeout of an Operation
- Configuring IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Default IP SLAs for a VPN Routing/Forwarding instance
- Deleting IP SLAs for a VPN Routing/Forwarding Instances
Configuring an IP SLA Group Schedule
- Configuring the Start Time After a Certain Amount of Time from the Present
- Deleting the Start Time After a Certain Amount of Time from the Present
- Configuring the Start Time as Now
- Deleting the Start Time as Now
- Configuring the Start Time as Pending
- Deleting the Start Time as Pending
- Configuring the Length of Time to Exectute in Seconds
- Deleting the Length of Time to Exectute in Seconds
- Configuring the SLA Group Schedule to Run Forever
- Deleting the SLA Group Schedule to Run Forever
- Configuring Add Probes to Existing Group
- Deleting Add Probes to Existing Group
- Configuring Probe Deletion From Existing Group
- Deleting Probe Deletion From Existing Group
- Configuring a Probe to be Scheduled Automatically Every Day
- Deleting a Probe to be Scheduled Automatically Every Day
- Configuring How long to Keep this Entry When Inactive
- Deleting How long to Keep this Entry When Inactive
-
- Configuring the Frequency in Seconds
- Configuring the Default Frequency
- Deleting the Frequency in Seconds
- Configuring the Owner of Entry
- Configuring the Default Owner
- Deleting the Owner of Entry
- Configuring the Default User-Defined Tag
- Configuring a User-Defined Tag
- Deleting a User-Defined Tag
- Configuring the Operation Threshold
- Configuring the Default Threshold
- Deleting the Operation Threshold
- Configuring the Type of Service
- Configuring the Default Type of Service
- Deleting the Type of Service
- Configuring the Traffic Class
- Configuring the Default Traffic Class
- Deleting the Traffic Class
- Configuring the Timeout of an Operation
- Configuring the Default Timeout
- Deleting the Timeout of an Operation
- Configuring IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Default IP SLAs for a VPN Routing/Forwarding instance
- Deleting IP SLAs for a VPN Routing/Forwarding Instances
Configuring an ICMP-Echo Operation
- Configuring the Frequency in Seconds
- Configuring the Default Frequency
- Deleting the Frequency in Seconds
- Configuring the Owner of Entry
- Configuring the Default Owner
- Deleting the Owner of Entry
- Configuring the Data Size Request
- Configuring the Request Data Size
- Deleting the Data Size Request
- Configuring a User-Defined Tag
- Configuring the Default User-Defined Tag
- Deleting a User-Defined Tag
- Configuring the Operation Threshold
- Configuring the Default Threshold
- Deleting the Operation Threshold
- Configuring the Timeout of an Operation
- Configuring the Default Timeout
- Deleting the Timeout of an Operation
- Configuring the Type of Service
- Configuring the Default Type of Service
- Deleting the Type of Service
- Configuring the Traffic Class
- Configuring the Default Traffic Class
- Deleting the Traffic Class
- Configuring IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Default IP SLAs for a VPN Routing/Forwarding instance
- Deleting IP SLAs for a VPN Routing/Forwarding Instances
- Configuring Data Verification
- Configuring Default Data Verification
- Deleting Data Verification
Configuring a TCP-Connect Operation
- Configuring to Disable Control Packets Exchange
- Deleting Disable Control Packets Exchange
- Configuring Enable Control packets Exchange
- Deleting Enable Control Packets Exchange
- Configuring the Destination Port
- Configuring the Frequency in Seconds
- Configuring the Default Frequency
- Deleting the Frequency in Seconds
- Configuring the Owner of Entry
- Configuring the Default Owner
- Deleting the Owner of Entry
- Configuring a User-Defined Tag
- Configuring the Default User-Defined Tag
- Deleting a User-Defined Tag
- Configuring the Operation Threshold
- Configuring the Default Threshold
- Deleting the Operation Threshold
- Configuring the Timeout of an Operation
- Configuring the Default Timeout
- Deleting the Timeout of an Operation
- Configuring the Type of Service
- Configuring the Default Type of Service
- Deleting the Type of Service
- Configuring the Traffic Class
- Configuring the Default Traffic Class
- Deleting the Traffic Class
- Configuring IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Default IP SLAs for a VPN Routing/Forwarding instance
- Deleting IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Destination IP Address
- Configuring the IPv6 Destination Address
Configuring a UDP-Echo Operation
- Configuring the Data-Pattern
- Deleting the Data-Pattern
- Configuring the Frequency in Seconds
- Configuring the Default Frequency
- Deleting the Frequency in Seconds
- Configuring the Owner of Entry
- Configuring the Default Owner
- Deleting the Owner of Entry
- Configuring a User-Defined Tag
- Configuring the Default User-Defined Tag
- Deleting a User-Defined Tag
- Configuring the Operation Threshold
- Configuring the Default Threshold
- Deleting the Operation Threshold
- Configuring the Timeout of an Operation
- Configuring the Default Timeout
- Deleting the Timeout of an Operation
- Configuring Data Verification
- Configuring Default Data Verification
- Deleting Data Verification
- Configuring Disable Control Packets Exchange
- Deleting Disable Control Packets Exchange
- Configuring Enable Control Packets Exchange
- Deleting Enable Control Packets Exchange
Configuring a UDP-Jitter Operation
- Configuring a Destination Port
- Configuring the Acceptable Clock Synchronization Error in Oneway Measurement
- Configuring the Default Acceptable Clock Synchronization Error
- Deleting the Acceptable Clock Synchronization Error in Oneway Measurement
- Configuring the Acceptable Clock Synchronization Error in Oneway Measurement as a Percent Value
- Deleting the Acceptable Clock Synchronization Error in Oneway Measurement as a Percent Value
- Configuring the Frequency in Seconds
- Configuring the Default Frequency
- Deleting the Frequency in Seconds
- Configuring the Operation Packet Priority
- Configuring the Default Operation Packet Priorities
- Deleting the Operation Packet Priority
- Configuring the Operation Packet Priority to Normal
- Deleting the Operation Packet Priority to Normal
- Configuring the Owner of Entry
- Configuring the Default Owner
- Deleting the Owner of Entry
- Configuring the UDP-Jitter Precision in Microseconds
- Deleting the UDP-Jitter Precision in Microseconds
- Configuring the UDP-Jitter Precision in Milliseconds
- Configuring the Default Precision of Measurement
- Deleting the UDP-Jitter Precision in Milliseconds
- Configuring the Data Size Request
- Configuring the Request Data Size
- Deleting the Data Size Request
- Configuring a User-Defined Tag
- Deleting a User-Defined Tag
- Configuring the Default User-Defined Tag
- Configuring the Operation Threshold
- Configuring the Default Threshold
- Deleting the Operation Threshold
- Configuring the Timeout of an Operation
- Configuring the Default Timeout
- Deleting the Timeout of an Operation
- Configuring the Type of Service
- Configuring the Default Type of Service
- Deleting the Type of Service
- Configuring the Traffic Class
- Configuring the Default Traffic Class
- Deleting the Traffic Class
- Configuring IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Default IP SLAs for a VPN Routing/Forwarding instance
- Deleting IP SLAs for a VPN Routing/Forwarding Instances
- Configuring the Destination IP Address
- Configuring the IPv6 Destination Address
- Configuring Data Verification
- Configuring Default Data Verification
- Deleting Data Verification
- Configuring to Enable Control Packets Exchange
- Deleting the Configuration for Enabling Control Packets Exchange
- Configuring the Source Address
- Deleting the Source Address
-
- Enabling Responder Part of SLA
- Disabling Responder Part of SLA
- Enabling Sender Part of SLA
- Disabling Sender Part of SLA
- Enabling Twamp-Server Part of SLA
- Disabling Twamp-Server Part of SLA
- Configuring IP SLAs Trigger Assignment
- Deleting IP SLAs Trigger Assignment
- Restarting an Active Entry
Configuring an IPv4 Node Under an ITD Device Group
- Configuring Hot-Standby Mode
- Deleting Hot-Standby Mode
- Configuring Traffic Distribution Weight
- Deleting Traffic Distribution Weight
- Configuring a DNS Protocol Service Probe at the Node-Level
- Deleting a DNS Protocol Service Probe at the Node-Level
- Configuring an HTTP Protocol Service Probe
- Deleting an HTTP Protocol Service Probe
- Configuring an ICMP Protocol Service Probe at the Node Level
- Deleting an ICMP Protocol Service Probe at the Node Level
- Configuring a UDP Protocol Service Probe at the Node Level
- Deleting a UDP Protocol Service Probe at the Node Level
Configuring an IPV6 Node Under an ITD Device Group
- Configuring Hot-Standby Mode
- Deleting Hot-Standby Mode
- Configuring Traffic Distribution Weight
- Deleting Traffic Distribution Weight
- Configuring a DNS Protocol Service Probe at the Node Level for IPv6
- Deleting a DNS Protocol Service Probe at the Node Level for IPv6
- Configuring an HTTP Protocol Service Probe at the Node Level for IPv6
- Deleting an HTTP Protocol Service Probe at the Node Level for IPv6
- Configuring an ICMP Protocol Service Probe at the Node Level for IPv6
- Deleting an ICMP Protocol Service Probe at the Node Level for IPv6
- Configuring a TCP Protocol Service Probe at the Node Level for IPv6
- Deleting a TCP Protocol Service Probe at the Node Level for IPv6
Configuring an IPv4 Standby Node and its Probe under an ITD Device Group
- Configuring a DNS Protocol Service Probe
- Deleting a DNS Protocol Service Probe
- Configuring an HTTP Protocol Service Probe
- Deleting an HTTP Protocol Service Probe
- Configuring an ICMP Protocol Service Probe at the Standby Node Level
- Deleting an ICMP Protocol Service Probe at the Standby Node Level
- Configuring a UDP Protocol Service Probe at the Standby Node Level
- Deleting a UDP Protocol Service Probe at the Standby Node Level
- Configuring IPv6 Standby Node
- Deleting IPv6 Standby Node
Configuring an ITD Default Device Group under a Service
- Configuring an ITD Device Group
- Deleting an ITD Device Group
- Configuring an ITD Node IPv4 Address
- Deleting an ITD Node IPv4 Address
- Configuring an ITD Node IPv6 Address
- Deleting an ITD Node IPv6 Address
- Configuring an ICMP Protocol Probe at the Device-Group Level
- Deleting an ICMP Protocol Probe at the Device-Group Level
- Configuring a UDP Protocol Service Probe
- Deleting a UDP Protocol Service Probe
- Configuring a TCP Protocol Service Probe
- Deleting a TCP Protocol Service Probe
- Configuring a DNS Protocol Service Probe
- Deleting a DNS Protocol Service Probe
- Configuring an HTTP Protocol Service Probe
- Deleting an HTTP Protocol Service Probe
-
- Configuring an ITD Service
- Deleting an ITD Service
- Configuring Probe Source Interface
- Deleting Probe Source Interface
- Configuring NAT Destination
- Deleting NAT Destination
- Configuring an ITD Service VRF
- Deleting an ITD Service VRF
- Configuring an ITD Include Access List for a Service
- Deleting an ITD Include Access List for a Service
- Configuring an IPv6 Include Access List for a Service
- Deleting an IPv6 Include Access List for a Service
- Specifying the Traffic to Exclude
- Deleting the Configuration that Specifies the Traffic to Exclude
- Configuring ITD Failaction as Bucket Distribute for a Service
- Deleting ITD Failaction as Bucket Distribute for a Service
- Configuring ITD Failaction as Node Least-Bucket
- Deleting ITD Failaction as Node Least-Bucket
- Configuring ITD Failaction as Node Per Bucket
- Deleting ITD Failaction as Node Per Bucket
- Configuring ITD Failaction as Node Reassign
- Deleting ITD Failaction as Node Reassign
- Configuring an Ethernet Interface as Ingress Interface for an ITD Service
- Deleting an Ethernet Interface as Ingress Interface for an ITD Service
- Configuring a VLAN Interface as Ingress Interface for an ITD Service
- Deleting a VLAN Interface as Ingress Interface for an ITD Service
- Configuring a Port Channel Interface as Ingress Interface for an ITD Service
- Deleting a Port Channel Interface as Ingress Interface for an ITD Service
- Configuring Destination-Based ITD Loadbalance Method
- Deleting Destination-Based ITD Loadbalance Method
- Configuring Source-Based ITD Loadbalance Method (TCP)
- Deleting Source-Based ITD Loadbalance Method (TCP)
- Configuring Source-Based ITD Loadbalance Method (UDP)
- Deleting Source-Based ITD Loadbalance Method (UDP)
- Configuring the Peer Service Involved in Sandwich Mode
- Deleting the Peer Service Involved in Sandwich Mode
- Disabling an ITD Service
- Enabling an ITD Service
-
- Configuring an ITD Session for a Specified Device Group
- Deleting an ITD Session for a Specified Device Group
- Configuring an IPv4-Address Node to an ITD Session for a Device Group
- Deleting an IPv4-Address Node to an ITD Session for a Device Group
- Adding an IPv6-Address Node to an ITD Session for a Device Group
- Deleting an IPv6-Address Node to an ITD Session for a Device Group
Configuring a Virtual IP Address
- Configuring a Virtual IP Address with Advertise Disabled on a Specified Port (TCP)
- Deleting a Virtual IP Address with Advertise Disabled on a Specified Port (TCP)
- Configuring a Virtual IP Address with Advertise Disabled on a Specified Port (UDP)
- Deleting a Virtual IP Address with Advertise Disabled on a Specified Port (UDP)
- Configuring a Virtual IP Address with Advertise Enabled on a Specified Port (UDP)
- Deleting a Virtual IP Address with Advertise Enabled on a Specified Port (UDP)
Configuring a Virtual IPv6 Address
- Configuring a Virtual IPv6 Address with Advertise Enabled on a Specified Port (UDP)
- Deleting a Virtual IPv6 Address with Advertise Enabled on a Specified Port (UDP)
-
- Enabling ITD
- Disabling ITD
- Configuring an ITD Device Group
- Deleting an ITD Device Group
- Configuring an ITD Policy Refresh Based on Access List Changes
-
- Configuring the Allowed ARP Traffic Rate (Ethernet Interface Range)
- Deleting the Allowed ARP Traffic Rate (Ethernet Interface Range)
- Configuring the Allowed ARP Traffic Rate (Ethernet Interface)
- Deleting the Allowed ARP Traffic Rate (Ethernet Interface)
- Configuring the Allowed ARP Traffic Rate (Port Channel Interface)
- Deleting the Allowed ARP Traffic Rate (Port Channel Interface)
-
- Configuring the Fabric Speed at 40G Instead of 42G
- Deleting the Fabric Speed at 40G Instead of 42G
-
- Configuring Bridge-Domain Switch Spanning Trees
- Deleting Bridge-Domain Switch Spanning Trees
- Configuring Line Card ISSU as Nondisruptive
- Deleting Line Card ISSU as Nondisruptive
- Configuring Pre-Standard MST BPDU Transmission on Port
- Deleting Pre-Standard MST BPDU Transmission on Port
- Configuring PVST Simulation
- Deleting PVST Simulation
- Configuring Line Card ISSU as Auto
- Deleting Line Card ISSU as Auto
-
- Configuring Ethernet EVI Id
- Deleting Ethernet EVI Id
- Configuring a VPN Route Distinguisher
- Deleting a VPN Route Distinguisher
- Configuring an Export Target-VPN Community
- Deleting an Export Target-VPN Community
- Configuring an Import Target-VPN Community
- Deleting an Import Target-VPN Community
Configuring MPLS Layer 3 VPN Load Balancing
- Configuring Label-IP Load Balancing
- Deleting Label-IP Load Balancing
- Configuring Label-Only Load Balancing
- Deleting Label-Only Load Balancing
Configuring Segment Routing for Traffic Engineering
- Configuring an Affinity Map
- Deleting an Affinity Map
- Configuring Candidate Paths
- Deleting Candidate Paths
- Configuring Candidate Path-Option Constraints
- Deleting Candidate Path-Option Constraints
- Configuring Affinity Constraints
- Deleting Affinity Constraints
- Configuring Exclude-Any Affinity Constraints
- Deleting Exclude-Any Affinity Constraints
- Configuring Include-All Affinity Constraints
- Deleting Include-All Affinity Constraints
- Configuring Include-Any Affinity Constraints
- Deleting Include-Any Affinity Constraints
- Configuring Candidate Path Association Group
- Deleting Candidate Path Association Group
- Configuring a Disjointness Association Type
- Deleting a Disjointness Association Type
- Configuring Link Disjointness
- Deleting Link Disjointness
- Configuring Node Disjointness
- Deleting Node Disjointness
- Configuring Candidate Path-Option Segments
- Deleting Candidate Path-Option Segments
- Configuring the Dynamic Path Option
- Deleting the Dynamic Path Option
- Configuring Dynamic Path-Option Metric Type
- Deleting Dynamic Path-Option Metric Type
- Configuring Dynamic Path Needs to be Computed Externally Via PCEP
- Deleting Dynamic Path Needs to be Computed Externally Via PCEP
- Configuring Candidate Paths
- Deleting Candidate Paths
- Configuring Candidate Path-Option Constraints
- Deleting Candidate Path-Option Constraints
- Configuring Affinity Constraints
- Deleting Affinity Constraints
- Configuring Exclude-Any Affinity Constraints
- Deleting Exclude-Any Affinity Constraints
- Configuring Include-All Affinity Constraints
- Deleting Include-All Affinity Constraints
- Configuring Include-Any Affinity Constraints
- Deleting Include-Any Affinity Constraints
- Configuring Candidate Path Association Group
- Deleting Candidate Path Association Group
- Configuring a Disjointness Association Type
- Deleting a Disjointness Association Type
- Configuring Link Disjointness
- Deleting Link Disjointness
- Configuring Node Disjointness
- Deleting Node Disjointness
- Configuring Candidate Path-Option Segments
- Deleting Candidate Path-Option Segments
- Configuring the Dynamic Path Option
- Deleting the Dynamic Path Option
- Configuring Dynamic Path-Option Metric Type
- Deleting Dynamic Path-Option Metric Type
- Configuring Dynamic Path Needs to be Computed Externally Via PCEP
- Configuring Traffic Engineering Related Configurations
- Deleting Traffic Engineering Related Configurations
- Configuring Segment Routing Parameters
- Deleting Segment Routing Parameters
- Configuring Candidate Path-Option Preference Entry
- Deleting Candidate Path-Option Preference Entry
- Deleting an Affinity Map Color
- Configuring a Candidate Path Association Group Id
- Deleting a Candidate Path Association Group Id
- Configuring a Candidate Path Association Group Id
- Deleting a Candidate Path Association Group Id
- Configuring a Segment List Name
- Deleting a Segment List Name
- Configuring an Ethernet Interface
- Deleting an Ethernet Interface
-
- Configuring Bytes-Only Adjacency Stats
- Deleting Bytes-Only Adjacency Stats
-
- Querying Ephemeral Data Example
-
- Configuring Auto-Detection for the DCBX Version
- Configuring the CEE Version of DCBX
- Deleting the CEE Version of DCBX
- Configuring the IEEE version of DCBX
- Deleting the IEEE 802.1 Version of DCBX
Configuring PIM on an Ethernet Interface
- Restricting Process Joins From Unknown Neighbors
- Deleting Process Joins From Unknown Neighbors Restriction
-
- Configuring the Rate Limit for PIM Asserts
- Deleting the Rate Limit for PIM Asserts
- Restricting Process Joins From Unknown Neighbors
- Deleting Process Joins From Unknown Neighbors Restriction
Configuring Multicast RPF Static Routes in VRF Mode
- Configuring a VRF for Multicast RPF Static Route
- Deleting a VRF for Multicast RPF Static Route Configuration
- Configuring a VRF for Multicast RPF Static Route (Null)
- Deleting a VRF for Multicast RPF Static Route (Null)
Configuring Multicast RPF Static Routes
- Configuring a Multicast RPF Static Route
- Deleting a Multicast RPF Static Route Configuration
- Configuring a Multicast RPF Static Route (with Len)
- Deleting a Multicast RPF Static Route (with Len) Configuration
- Configuring a Multicast RPF Static Route (Null)
- Deleting a Multicast RPF Static Route (Null)
Configuring Hardware Profile Settings
- Configuring the Multicast Optimization Disable Profile
- Deleting the Multicast Optimization Disable Profile
- Configuring RPF Check Optimization on Monticello ASIC
- Deleting RPF Check Optimization on Monticello ASIC
Setting High Priority to Multicast
- Configuring High Priority to Multicast
- Deleting High Priority to Multicast
-
- Configuring the Node ID
- Deleting the Node ID
Enabling Model-Driven Programmability Features
- Enabling GRPC
- Disabling GRPC
- Enabling Netconf
- Disabling Netconf
- Enabling RESTConf
- Disabling RESTConf
Configuring a VRF Under an OSPFv3 Instance
- Configuring an IPv6 Address Family
- Deleting an IPv6 Address Family
Configuring OSPFv3 Broadcast Network Type
- Configuring Routing Update Supression on the Interface
- Deleting Routing Update Supression on the Interface
- Configuring an OSPF Point-to-Point Network
- Deleting an OSPF Point-to-Point Network
Configuring OSPFv3 on an Ethernet Interface
- Configuring the IPv6 Routing Process to Not Include Secondary IPv6 Addresses
- Deleting the Config to Not Include Secondary IPv6 Addresses
- Disabling OSPF MTU Mismatch Detection
- Deleting the Config for Disabling OSPF MTU Mismatch Detection
- Configuring OSPF Shutdown on this Interface
- Deleting OSPF Shutdown on this Interface
- Configuring the Cost Associated with Interface
- Deleting the Cost Associated with Interface
- Configuring the Dead Interval
- Deleting the Dead Interval
- Configuring the Hello Interval
- Deleting the Hello Interval
- Configuring an Instance Id
- Deleting an Instance Id
- Configuring the Router Priority
- Deleting the Router Priority
- Configuring Packet Retransmission Interval
- Deleting Packet Retransmission Interval
- Configuring Packet Transmission Delay
- Deleting Packet Transmission Delay
Configuring an IPv6 Unicast Address Family Under an OSPFv3 Instance
- Configuring an IPv6 Unicast Address Family
- Deleting an IPv6 Unicast Address Family
- Configuring a Default Route Distribution
- Deleting a Default Route Distribution
- Configuring a Route Map Applied to Redistributed Routes (AMT Anycast Prefix)
- Deleting a Route Map Applied to Redistributed Routes (AMT Anycast Prefix)
- Configuring a Route Map Applied to Redistributed Routes (BGP)
- Deleting a Route Map Applied to Redistributed Routes (BGP)
- Configuring a Route Map Applied to Redistributed Routes (Directly Connected)
- Deleting a Route Map Applied to Redistributed Routes (Directly Connected)
- Configuring a Route Map Applied to Redistributed Routes (EIGRP)
- Deleting a Route Map Applied to Redistributed Routes (EIGRP)
- Configuring a Route Map Applied to Redistributed Routes (ISIS)
- Deleting a Route Map Applied to Redistributed Routes (ISIS)
- Configuring a Route Map Applied to Redistributed Routes (LISP EID-Prefixes in the Non-Default VRF)
- Deleting a Route Map Applied to Redistributed Routes (LISP EID-Prefixes in the Non-Default VRF)
- Configuring a Route Map Applied to Redistributed Routes (OSPF)
- Deleting a Route Map Applied to Redistributed Routes (OSPF)
- Configuring a Route Map Applied to Redistributed Routes (RIP)
- Deleting a Route Map Applied to Redistributed Routes (RIP)
- Configuring a Route Map Applied to Redistributed Routes (Static Routes)
- Deleting a Route Map Applied to Redistributed Routes (Static Routes)
Configuring OSPFv3 on a MGMT Interface
- Configuring the OSPFv3 Instance Id
- Deleting the OSPFv3 Instance Id
- Configuring to Disable OSPF MTU Mismatch Detection
- Deleting to Disable OSPF MTU Mismatch Detection
- Configuring Routing Update Supression on the Interface
- Deleting Routing Update Supression on the Interface
- Configuring OSPF Shutdown on this Interface
- Deleting OSPF Shutdown on this Interface
- Configuring to Not Include Secondary IPv6 Addresses
- Deleting to Not Include Secondary IPv6 Addresses
- Configuring to Not Include Secondary IPv6 Addresses
- Deleting to Not Include Secondary IPv6 Addresses
- Configuring the OSPFv3 Router Priority
- Deleting the OSPFv3 Router Priority
- Deleting Packet Transmission Delay
Configuring OSPFv3 on a P2P Ethernet Interface
- Configuring Routing Update Supression on the Interface
- Deleting Routing Update Supression on the Interface
- Configuring an OSPF Broadcast Multi-Access Network
- Deleting an OSPF Broadcast Multi-Access Network
- Configuring an OSPF Point-to-Point Network
- Deleting an OSPF Point-to-Point Network
Configuring OSPFv3 on a Tunnel Interface
- Configuring OSPF Shutdown on the Interface
- Deleting OSPF Shutdown on this Interface
- Configuring the Cost Associated with the Interface
- Deleting the Cost Associated with the Interface
- Configuring to Not Include Secondary IPv6 Addresses
- Deleting to Not Include Secondary IPv6 Addresses
- Configuring to Not Include Secondary IPv6 Addresses
- Deleting to Not Include Secondary IPv6 Addresses
- Configuring to Disable OSPF MTU Mismatch Detection
- Deleting to Disable OSPF MTU Mismatch Detection
- Configuring the OSPFv3 Router Priority
- Deleting the OSPFv3 Router Priority
- Configuring Packet Transmission Delay
- Deleting Packet Transmission Delay
- Configuring the OSPFv3 Instance Id
- Deleting the OSPFv3 Instance Id
-
- Enabling OSPFv3
- Disabling OSPFv3
- Enabling Internet Messaging Program (IMP)
- Disabling Internet Messaging Program (IMP)
- Configuring a Routing Process
- Deleting a Routing Process
Configuring the Event History Buffer Size
- Configuring the Event History Buffer Size for Adjacency Formation Logs
- Deleting the Event History Buffer Size for Adjacency Formation Logs
- Configuring the Event History Buffer Size for LSA Flooding Logs
- Deleting the Event History Buffer Size for LSA Flooding Logs
- Configuring the Event History Buffer Size for HA and GR Logs
- Deleting the Event History Buffer Size for HA and GR Logs
- Configuring the Event History Buffer Size for HELLO Logs
- Deleting the Event History Buffer Size for HELLO Logs
- Configuring the Event History Buffer Size for LDP Logs
- Deleting the Event History Buffer Size for LDP Logs
- Configuring the Event History Buffer Size for LSA Logs
- Deleting the Event History Buffer Size for LSA Logs
- Configuring the Event History Buffer Size for DME OBJECTSTORE Logs
- Deleting the Event History Buffer Size for DME OBJECTSTORE Logs
- Configuring the Event History Buffer Size for Redistribution Logs
- Deleting the Event History Buffer Size for Redistribution Logs
- Configuring the Event History Buffer Size for Segment Routing Logs
- Deleting the Event History Buffer Size for Segment Routing Logs
- Configuring the Event History Buffer Size for SPF TRIGGER Logs
- Deleting the Event History Buffer Size for SPF TRIGGER Logs
Configuring Priority Flow Control
- Configuring the Override Interface Mode as Off
- Deleting the Priority Flow Control Mode
Configuring Hardware Profile Settings on the Cisco Nexus 3500 Platform
- Configuring Hardware Profile Latency
- Configuring the Hardware Profile Buffer SPAN Threshold
- Configuring the Hardware Profile Buffer QoS Group Threshold
-
- Configuring the Minimum/Reserved Buffer Selection for a QoS Group (Default)
- Configuring the Minimum/Reserved Buffer Selection for a QoS Group (None)
- Configuring the Minimum/Reserved Buffer Selection for a QoS Group (All)
- Configuring PG Headroom Reservation Percent
- Deleting PG Headroom Reservation Percent
- Configuring PG Min
- Deleting PG Min
- Configuring PGMIN Value
- Deleting PGMIN Value
- Configuring Ingress PG Shared Buffer Usage
- Deleting Ingress PG Shared Buffer Usage
- Configuring QoS Classification on NS Only in Hardware
- Deleting IPG in Shaping/Policing
- Configuring IPG in Shaping/Policing
Configuring Cisco Nexus 9000 (Cisco-ASIC based) Platform QoS
- Configuring the Ingress PG Shared Buffer Usage
- Deleting the Ingress PG Shared Buffer Usage
- Configuring To Include IPG in Shaping/Policing
- Deleting the Configuration for Including IPG in Shaping/Policing
- Enabling QoS Classification on NS Only in Hardware
- Disabling QoS Classification on NS Only in Hardware
- Enabling the PG Minimum Value
- Disabling the PG Minimum Value
- Configuring the PG Headroom Reservation Percent
- Deleting the PG Headroom Reservation Percent
- Configuring the Minimum/Reserved Buffer Selection for a QoS Group
- Deleting the Minimum/Reserved Buffer Selection for a QoS Group
Configuring Policing (Cisco Nexus 3500 QoS Commands)
- Enabling QoS Policy Statistics
- Disabling QoS Policy Statistics
- Configuring a Descriptions for a QoS Class Map
- Deleting a Descriptions for a QoS Class Map
- Configuring a Descriptions for a QoS Policy Map
- Deleting a Descriptions for a QoS Policy Map
- Configuring the Priority-Flow-Control Mode
- Deleting the Priority-Flow-Control Mode
Configuring, Deleting, and Querying User Information
- Configuring User Information
- Deleting User Information
- Configuring Maximum Simultaneous Logins
- Deleting the Maximum Simultaneous Logins
Configuring IPv4 and IPv6 ACLs
- Configuring the Port Expansion Threshold
- Deleting the Port Expansion Threshold
Configuring LDAP Server Groups
- Configuring an LDAP Server Group
- Deleting an LDAP Server Group
- Configuring the Authentication Method to Bind First
- Deleting the Authentication Method to Bind First
- Configuring the Default Password
- Deleting the Default Password
- Configuring the Global LDAP Server Deadtime Period
- Deleting the Global LDAP Server Deadtime Period
- Configuring Cert-DN Matching
- Deleting Cert-DN Matching
- Configuring Group Validation
- Deleting Group Validation
- Configuring an AAA Server Group
- Configuring Per-VRF Information
- Deleting Per-VRF Information
- Configuring an LDAP Search MAP
- Deleting an LDAP Search MAP
-
- Configuring the Search Map
- Deleting the Search Map
- Configuring Global LDAP Server Deadtime Period
- Deleting Global LDAP Server Deadtime Period
- Enabling SSL
- Disabling SSL
- Configuring the LDAP Server Timeout Period
- Deleting the LDAP Server Timeout Period
- Configuring the Time Interval for Monitoring the Server
- Deleting the Time Interval for Monitoring the Server
- Configuring the LDAP Server Timeout Period In Seconds
- Deleting the LDAP Server Timeout Period In Seconds
- Configuring LDAP Server Disable Referrals
Configuring RADIUS Group Servers
- Configuring RADIUS Server Deadtime Period
- Deleting RADIUS Server Deadtime Period
-
- Configuring the RADIUS Server DNS Name
- Configuring the RADIUS Server DNS Name
- Configuring the Time Interval for Monitoring the Server
- Deleting the Time Interval for Monitoring the Server
- Configuring the Time Interval for Monitoring the Server
- Deleting the Time Interval for Monitoring the Server
Configuring TACACS+ Group Servers
- Configuring the Deadtime Period
- Deleting the Deadtime Period
-
- Configuring the TACACS Server Timeout Period
- Configuring the Time Interval for Monitoring the Server (for Test Packets)
- Deleting the Time Interval for Monitoring the Server (for Test Packets)
- Configuring the Time Interval for Monitoring the Server (for a Host Server)
- Deleting the Time Interval for Monitoring the Server (for a Host Server)
-
- Enabling FIPS Mode
-
- Configuring the Max Input and Output Packet Rate
- Deleting the Max Input and Output Packet Rate
- Configuring the Max Input Packet Rate
- Deleting the Max Input Packet Rate
- Configuring the Max Output Packet Rate
- Deleting the Max Output Packet Rate
- Configuring a Rate Limiter
-
- Updating the Cert DN Using the DSA Algorithm
- Deleting the Cert DN Using the DSA Algorithm
- Updating the Cert DN Using the RSA Algorithm
- Deleting the Cert DN Using the RSA Algorithm
- Configuring the SSH Client Session Idle Timeout and Max Count of Keepalive Packets
- Deleting the SSH Client Session Idle Timeout and Max Count of Keepalive Packets
- Configuring the Max Data and Time
- Deleting the Max Data and Time
- Configuring Enabling Weak Ciphers for SSH
- Deleting Enabling Weak Ciphers for SSH
- Configuring the HTTPS Key File
- Forcing DSA Key Generation
- Deleting the DSA Key Generation
- Configuring ECDSA Keys and Forcing the Key Generation
- Deleting ECDSA Keys and Forcing the Key Generation
- Configuring RSA Keys and Forcing the Key Generation
- Deleting RSA Keys and Forcing the Key Generation
- Configuring the Key Exchange Methods to Generate Per-Connection Keys
- Deleting the Key Exchange Methods to Generate Per-Connection Keys
- Configuring Ciphers to Encrypt the Connection
- Deleting Ciphers to Encrypt the Connection
- Configuring Message Authentication Codes to Detect Traffic Modification
- Deleting Message Authentication Codes to Detect Traffic Modification
- Configuring Public Key Algorithms that the Server Can Use to Authenticate Itself to the Client
- Deleting Public Key Algorithms that the Server Can Use to Authenticate Itself to the Client
Configuring System Security Compliance
- Configuring Common-Criteria Mode
- Deleting Common-Criteria Mode
-
- Configuring a VPN Id
- Deleting a VPN Id
-
- Configuring to Test Each Sample Directly
- Deleting the Config to Test Each Sample Directly
- Configuring To Test Delta Between Samples
- Deleting the Config To Test Delta Between Samples
-
- Configuring Topology Associated with the SNMP Context
- Configuring Global Privacy Enforcement for All Users
- Deleting Global Privacy Enforcement for All Users
- Configuring the Notification to Host UDP Port Number
- Configuring Ethernet Source Interface for Sending SNMP Notifications
- Deleting the Notification to Host UDP Port Number (Ethernet Source Interface Sends SNMP Notifications)
- Configuring VLAN Source Interface for Sending SNMP Notifications
- Deleting VLAN Source Interface for Sending SNMP Notifications
- Configuring Port Channel Source Interface for Sending SNMP Notifications
- Deleting Port Channel Source Interface for Sending SNMP Notifications
- Configuring Loopback Source Interface for Sending SNMP Notifications
- Deleting Loopback Source Interface for Sending SNMP Notifications
- Configuring to Filter Notifications to the Notification Host Receiver Based on the Configured VRF
- Deleting the Config to Filter Notifications to the Notification Host Receiver Based on the Configured VRF
- Configuring MGMT Source Interface for Sending SNMP Notifications
- Deleting MGMT Source Interface for Sending SNMP Notifications
- Configuring the Name of the SNMP Context (MIB Access Parameters)
- Deleting the Name of the SNMP Context (MIB Access Parameters)
- Configuring IPv4 and IPv6 ACLs for a User SNMP Server
- Deleting IPv4 and IPv6 ACLs for a User SNMP Server
- Configuring Filter-VRF for Notification Host
- Deleting Filter-VRF for Notification Host
- Configuring an SNMPv3 User with IPv4/IPv6 ACL
- Deleting an SNMPv3 User with IPv4/IPv6 ACL
- Configuring a Source Interface for SNMP Notification Host
- Deleting a Source Interface for SNMP Notification Host
- Configuring the SNMP Server for Reload
- Deleting the SNMP Server Reload Configuration
- Configuring a Long Description for Interface Alias
- Deleting a Long Description for Interface Alias
-
- Configuring the Number of Access Control Groups Allowed on the Same Source Interface
- Deleting the Number of Access Control Groups Allowed on the Same Source Interface
- Configuring a Source VLAN (Ingress)
- Deleting a Source VLAN (Ingress)
- Configuring a Source VLAN (Both Directions)
- Deleting a Source VLAN (Both Directions)
- Configuring SPAN on PFC Frames for an Ethernet Source Interface (Ingress)
- Deleting SPAN on PFC Frames for an Ethernet Source Interface (Ingress)
- Configuring a Sup-Eth Source Interface (Ingress)
- Deleting a Sup-Eth Source Interface (Ingress)
Configuring a Local Source Session
- Configuring a Destination Ethernet Interface
- Deleting a Destination Ethernet Interface
- Configuring a Destination Port Channel Interface
- Configuring the Number of Access Control Groups Allowed on the Same Source Interface
- Deleting the Number of Access Control Groups Allowed on the Same Source Interface
- Configuring Source VLAN (Ingress)
- Deleting a Source VLAN (Egress)
- Configuring a Source VLAN (Both Directions)
- Deleting a Source VLAN (Both Directions)
- Configuring SPAN on PFC Frames for an Ethernet Source Interface (Ingress)
- Deleting SPAN on PFC Frames for an Ethernet Source Interface (Ingress)
- Configuring a Sup-Eth Source Interface (Ingress)
- Deleting a Sup-Eth Source Interface (Ingress)
- Configuring MTU
- Deleting an MTU Configuration
-
- Configuring a Local Session
- Deleting a Local Session
- Configuring All Sessions to Shut
- Deleting All Sessions Configured to Shut
- Configuring the Number of Access Control Groups Allowed on the Same Source Interface
- Deleting the Number of Access Control Groups Allowed on the Same Source Interface
- Configuring Source VLAN (Ingress)
- Deleting Source VLAN (Ingress)
- Configuring a Source VLAN (Both Directions)
- Deleting a Source VLAN (Both Directions)
- Configuring SPAN on PFC Frames for an Ethernet Source Interface (Ingress)
- Deleting SPAN on PFC Frames for an Ethernet Source Interface (Ingress)
- Configuring a Sup-Eth Source Interface (Ingress)
- Deleting a Sup-Eth Source Interface (Ingress)
-
- Configuring the Clock Manager Syslog Message Level
- Deleting the Clock Manager Syslog Message Level
- Configuring the IS-IS Syslog Message level
- Deleting the IS-IS Syslog Message level
- Configuring the LDAP Syslog Message Level
- Deleting the LDAP Syslog Message Level
- Configuring the Line Card Manager Syslog Message Level
- Deleting the Line Card Manager Syslog Message Level
- Configuring the MIG UTILS Daemon Syslog Message Level
- Deleting the MIG UTILS Daemon Syslog Message Level
- Configuring the NAT Syslog Message Level
- Deleting the NAT Syslog Message Level
- Configuring the Packet Manager Syslog Message Level
- Deleting the Packet Manager Syslog Message Level
- Configuring the Platform Manager Logging Level
- Deleting the Platform Manager Logging Level
- Configuring the Security Syslog Message Level
- Deleting the Security Syslog Message Level
- Configuring the SNMP Syslog Message Level
- Deleting the SNMP Syslog Message Level
-
- Configuring Memory Thresholds as Critical
- Deleting Memory Thresholds as Critical
-
- Enabling EVMED
- Disabling EVMED
-
- Enabling sFlow Agent
- Disabling sFlow Agent
- Configuring sFlow Extended Switch Flow
- Deleting sFlow Extended Switch Flow
- Configuring the Source IP Address to Send to the sFlow Collector
- Deleting the Source IP Address to Send to the sFlow Collector
- Configuring the sFlow Agent IP Address
- Deleting the sFlow Agent IP Address
- Configuring the sFlow Collector UDP Port
- Deleting the sFlow Collector UDP Port
- Configuring the sFlow Counter Poll Interval
- Deleting the sFlow Counter Poll Interval
- Configuring the sFlow Data Source Interface (Ethernet)
- Deleting the sFlow Data Source Interface (Ethernet)
- Configuring the sFlow Data Source Interface (Port Channel)
- Deleting the sFlow Data Source Interface (Port Channel)
- Configuring the sFlow Datagram Size
- Deleting the sFlow Datagram Size
- Configuring the sFlow Sampled Size
- Deleting the sFlow Sampled Size
- Configuring the sFlow Sampling Rate
- Deleting the sFlow Sampling Rate
Configuring Sup Boot Variables
- Configuring the Autocopy of Bootvar Images
- Deleting the Autocopy of Bootvar Images
- Configuring PXE Boot
- Deleting PXE Boot
- Configuring Boot from Bootflash
- Deleting Boot from Bootflash
- Configuring Boot Mode LXC
- Deleting Boot Mode LXC
- Configuring Boot Mode Docker Cluster Mode
- Deleting Boot Mode Docker Cluster Mode
-
- Configuring USB1 as the Destination Filesystem
- Deleting USB1 as the Destination Filesystem
Configuring System Trace Level
- Configuring the System Trace Level
- Deleting the System Trace Level
Configuring User-Defined Fields
- Configuring UDF Names
- Deleting UDF Names
- Configuring Offset Base From L3 Header
- Deleting Offset Base From L3 Header
- Configuring Offset Base From L4 Header
- Deleting Offset Base From L4 Header
- Configuring Offset Base From L2 Header
- Deleting Offset Base From L2 Header
Configuring the Fast Reload Network Stabilization Timer
- Configuring the Fast Reload Stablization Time
- Deleting the Fast Reload Stablization Time
-
- Configuring to Always Use Custom Profile when Entering Maintenance Mode
- Deleting to Always Use Custom Profile when Entering Maintenance Mode
- Configuring a Delay to Allow Protocol Reroute Before Releasing CLI
- Deleting a Delay to Allow Protocol Reroute Before Releasing CLI
- Configuring the Reset Reason
- Deleting the Reset Reason
- Configuring the Delay After Which the After_Maintenance Snapshot will Be Taken
- Deleting the Delay After Which the After_Maintenance Snapshot will Be Taken
- Restarting Maintenance Mode Timer with a New Value
- Deleting a Configured Maintenance Mode Timer Restart
- Configuring Shutdown on Failure
- Deleting Shutdown on Failure
Configuring the Maintenance-Mode Profile
- Verifying the Maintenance-Mode Profile Configuration
- Verifying the Normal-Mode Profile Configuration
-
- Configuring to Scan ACLs Present in all NTP Access Groups
- Deleting a Configuration to Scan ACLs Present in all NTP Access Groups
- Enabling Control Mode Packets
- Disabling Control Mode Packets
- Configuring the Rate Limit for Control Packets
- Deleting the Rate Limit for Control Packets
- Configuring Enabling Private Mode Packets
- Deleting Enabling Private Mode Packets
- Configuring NTP Passive
- Deleting NTP Passive
-
- Enabling Scheduler
- Disabling Scheduler
Configuring System Interface Shutdown
- Configuring Interface Shutdown Excluding FEX Fabric
- Deleting Configured Interface Shutdown Excluding FEX Fabric
System-Level High Availability
- Configuring Full Rate Mode
- Deleting Full Rate Mode
Configuring IS-IS in Interface Configuration Mode
- Configuring the Hello Authentication Type as Cleartext
- Deleting the Hello Authentication Type as Cleartext
- Configuring the Authentication Keychain for Level-1 IIHs (Cleartext)
- Deleting the Authentication Keychain for Level-1 IIHs (Cleartext)
- Configuring the Authentication Keychain for Level-2 IIHs (Cleartext)
- Deleting the Authentication Keychain for Level-2 IIHs (Cleartext)
- Configuring the Hello Authentication Type as HMAC-MD5
- Deleting the Hello Authentication Type as HMAC-MD5
- Configuring the Authentication Keychain for Level-1 IIHs (HMAC-MD5)
- Deleting the Authentication Keychain for Level-1 IIHs (HMAC-MD5)
- Configuring the Authentication Keychain for Level-2 IIHs (HMAC-MD5)
- Deleting the Authentication Keychain for Level-2 IIHs (HMAC-MD5)
- Configuring the Authentication Keychain for Level-1 IIHs (Metric Interface)
- Deleting the Authentication Keychain for Level-1 IIHs (Metric Interface)
- Configuring the Authentication Keychain for Level-2 IIHs (Metric Interface)
- Deleting the Authentication Keychain for Level-2 IIHs (Metric Interface)
- Configuring the Authentication Keychain for Level-1 IIHs (IPv6 Metric Interface)
- Deleting the Authentication Keychain for Level-1 IIHs (IPv6 Metric Interface)
- Configuring the Authentication Keychain for Level-2 IIHs (IPv6 Metric Interface)
- Deleting the Authentication Keychain for Level-2 IIHs (IPv6 Metric Interface)
- Configuring the Hello Authenticaiton Keychain for an Ethernet Interface
- Deleting the Hello Authenticaiton Keychain for an Ethernet Interface
- Configuring the Authentication Keychain for Level-1 IIHs on an Ethernet Interface
- Deleting the Authentication Keychain for Level-1 IIHs on an Ethernet Interface
- Configuring the Authentication Keychain for Level-2 IIHs on an Ethernet Interface
- Deleting the Authentication Keychain for Level-2 IIHs on an Ethernet Interface
- Configuring Pad IS-IS Hello PDUs to Full MTU on an Ethernet Interface
- Configuring Pad Every Hello on an Ethernet Interface
- Deleting Pad IS-IS Hello PDUs to Full MTU on an Ethernet Interface
- Configuring MTU Check for Level-1 on an Ethernet Interface
- Deleting MTU Check for Level-1 on an Ethernet Interface
- Configuring an MTU Check for Level-2 on an Ethernet Interface
- Deleting an MTU Check for Level-2 on an Ethernet Interface
- Configuring a BFD Interface
- Deleting a BFD Interface
- Configuring a CSNP Interval as Level 1
- Deleting a CSCNP Interval as Level 1
- Configuring a CSCNP Interval as Level 2
- Deleting a CSCNP Interval as Level 2
- Configuring the Hello Interval as Level 1 IIHs
- Deleting the Hello Interval as Level 1 IIHs
- Configuring the Hello Interval as Level 2 IIHs
- Deleting the Hello Interval as Level 2 IIHs
- Configuring the Multiplier for Hello Holding Time Level 1
- Deleting the Multiplier for Hello Holding Time Level 1
- Configuring the Multiplier for Hello Holding Time Level 2
- Deleting the Multiplier for Hello Holding Time Level 2
- Configuring BFD for IPv6
- Deleting BFD for IPv6
- Configuring the Metric for IPv6 Topology
- Deleting the Metric for IPv6 Topology
- Configuring the MTU Check on Received Hellos (If Padded) as Level 1
- Deleting the MTU Check on Received Hellos (If Padded) As Level 1
- Configuring the MTU Check on Received Hellos (If Padded) as Level 2
- Deleting the MTU Check on Received Hellos (If Padded) as Level 2
- Configuring Clear N Flag for Prefix
- Deleting Clear N Flag for Prefix
- Configuring the Priority for Level-1 Routing
- Deleting the Priority for Level-1 Routing
- Configuring the Priority for Level-2 Routing
- Deleting the Priority for Level-2 Routing
- Configuring to Pad IS-IS HellO PDUs to Full MTU
- Deleting to Pad IS-IS HellO PDUs to Full MTU
- Configuring IS-IS Mesh Group
- Deleting IS-IS Mesh Group
- Configuring to Suppress IS-IS PDU Level 1 and Level 2
- Deleting to Suppress IS-IS PDU Level 1 and Level 2
Configuring IS-IS in Router IPv4 Address Family Configuration Mode
- Configuring the Maximum Paths per Destination for an IPv4 Unicast Address Family
- Deleting the Maximum Paths per Destination for an IPv4 Unicast Address Family
- Configuring Segment Routing MPLS on an Ethernet Interface
- Deleting Segment Routing MPLS on an Ethernet Interface
- Configuring the OSPF Administrative Distance on an IPv4 Unicast Address Family
- Deleting the OSPF Administrative Distance on an IPv4 Unicast Address Family
Configuring IS-IS in Router IPv6 Address Family Configuration Mode
- Configuring the Maximum Paths per Destination for an IPv6 Unicast Address Family
- Deleting the Maximum Paths per Destination for an IPv6 Unicast Address Family
- Configuring the OSPF Administrative Distance
- Deleting the OSPF Administrative Distance
Configuring IS-IS in Router VRF Configuration Mode
- Configuring the Maximum Paths per Destination for a VRF
- Deleting the Maximum Paths per Destination for a VRF
- Configuring an IPv4 Unicast Address Family for a VRF
- Deleting an IPv4 Unicast Address Family for a VRF
- Configuring an IPv6 Unicast Address Family for a VRF
- Deleting an IPv6 Unicast Address Family for a VRF
- Configuring the OSPF Administrative Distance
- Deleting the OSPF Administrative Distance
Configuring IS-IS in Router Configuration Mode
- Configuring the Event-History Buffer Size for IS-IS Dynamic Flooding Events to Disabled
- Deleting the Event-History Buffer Size for IS-IS Dynamic Flooding Events Configured as Disabled
- Configuring the Event-History Buffer Size for IS-IS Dynamic Flooding Events to Small
- Deleting the Event-History Buffer Size for IS-IS Dynamic Flooding Events Configured as Small
- Configuring the Event-History Buffer Size for IS-IS Dynamic Flooding Events to Medium
- Deleting the Event-History Buffer Size for IS-IS Dynamic Flooding Events to Medium
- Configuring the Event-History Buffer Size for IS-IS Dynamic Flooding Events to Large
- Deleting the Event-History Buffer Size for IS-IS Dynamic Flooding Events to Large
- Configuring Flush Routes in RIB Upon Controlled Restart
- Deleting Flush Routes in RIB Upon Controlled Restart
- Configuring Adjacency Event History Buffer Size as Disabled
- Deleting Adjacency Event History Buffer Size as Disabled
- Configuring Adjacency Event History Buffer Size Small
- Deleting Adjacency Event History Buffer Size Small
- Configuring Adjacency Event History Buffer Size Medium
- Deleting Adjacency Event History Buffer Size Medium
- Configuring Adjacency Event History Buffer Size Large
- Deleting Adjacency Event History Buffer Size Large
- Configuring CLI Event History Buffer Size as Disabled
- Deleting CLI Event History Buffer Size as Disabled
- Configuring CLI Event History Buffer Size as Small
- Deleting CLI Event History Buffer Size as Small
- Configuring CLI Event History Buffer Size as Medium
- Deleting CLI Event History Buffer Size as Medium
- Configuring CLI Event History Buffer Size as Large
- Deleting CLI Event History Buffer Size as Large
- Configuring CSNP Event History Buffer Size as Disabled
- Deleting CSNP Event History Buffer Size as Disabled
- Configuring CSNP Event History Buffer Size as Small
- Deleting CSNP Event History Buffer Size as Small
- Configuring CSNP Event History Buffer Size as Medium
- Deleting CSNP Event History Buffer Size as Medium
- Configuring CSNP Event History Buffer Size as Large
- Deleting CSNP Event History Buffer Size as Large
- Configuring DIS Event History Buffer Size as Disabled
- Deleting DIS Event History Buffer Size as Disabled
- Configuring DIS Event History Buffer Size as Small
- Deleting DIS Event History Buffer Size as Small
- Configuring DIS Event History Buffer Size as Medium
- Deleting DIS Event History Buffer Size as Medium
- Configuring DIS Event History Buffer Size as Large
- Deleting DIS Event History Buffer Size as Large
- Configuring Event History Buffer Size for Events as Disabled
- Deleting Event History Buffer Size for Events as Disabled
- Configuring Event History Buffer Size for Events as Small
- Deleting Event History Buffer Size for Events as Small
- Configuring Event History Buffer Size for Events as Medium
- Deleting Event History Buffer Size for Events as Medium
- Configuring Event History Buffer Size for Events as Large
- Deleting Event History Buffer Size for Events as Large
- Configuring Event History Buffer Size for Graceful Restart Events as Disabled
- Deleting Event History Buffer Size for Graceful Restart Events as Disabled
- Configuring Event History Buffer Size for Graceful Restart Events as Small
- Deleting Event History Buffer Size for Graceful Restart Events as Small
- Configuring Event History Buffer Size for Graceful Restart Events as Medium
- Deleting Event History Buffer Size for Graceful Restart Events as Medium
- Configuring Event History Buffer Size for Graceful Restart Events as Large
- Deleting Event History Buffer Size for Graceful Restart Events as Large
- Configuring Event History Buffer Size for HA Events as Disabled
- Deleting Event History Buffer for HA Events as Disabled
- Configuring Event History Buffer Size for HA Events as Small
- Deleting Event History Buffer Size for HA Events as Small
- Configuring Event History Buffer Size for HA Events as Medium
- Deleting Event History Buffer Size for HA Events as Medium
- Configuring Event History Buffer Size for HA Events as Large
- Deleting Event History Buffer Size for HA Events as Large
- Configuring Event History Buffer Size for IIH Events as Disabled
- Deleting Event History Buffer Size for IIH Events as Disabled
- Configuring Event History Buffer Size for IIH Events as Small
- Deleting Event History Buffer Size for IIH Events as Small
- Configuring Event History Buffer Size for IIH Events as Medium
- Deleting Event History Buffer Size for IIH Events as Medium
- Configuring Event History Buffer Size for IIH Events as Large
- Deleting Event History Buffer Size for IIH Events as Large
- Configuring Event History Buffer Size for LSP-Gen Events as Disabled
- Deleting Event History Buffer Size for LSP-Gen Events as Disabled
- Configuring Event History Buffer Size for LSP-Gen Events as Small
- Deleting Event History Buffer Size for LSP-Gen Events as Small
- Configuring Event History Buffer Size for LSP-Gen Events as Medium
- Deleting Event History Buffer Size for LSP-Gen Events as Medium
- Configuring Event History Buffer Size for LSP-Gen Events as Large
- Deleting Event History Buffer Size for LSP-Gen Events as Large
- Configuring Event History Buffer Size for PSNP Events as Disabled
- Deleting Event History Buffer Size for PSNP Events as Disabled
- Configuring Event History Buffer Size for PSNP Events as Small
- Deleting Event History Buffer Size for PSNP Events as Small
- Configuring Event History Buffer Size for PSNP Events as Medium
- Deleting Event History Buffer Size for PSNP Events as Medium
- Configuring Event History Buffer Size for PSNP Events as Large
- Deleting Event History Buffer Size for PSNP Events as Large
- Configuring Event History Buffer Size for SPF-Leaf Events As Disabled
- Deleting Event History Buffer Size for SPF-Leaf Events As Disabled
- Configuring Event History Buffer Size for SPF-Leaf Events as Small
- Deleting Event History Buffer Size for SPF-Leaf Events as Small
- Configuring Event History Buffer Size for SPF-Leaf Events as Medium
- Deleting Event History Buffer Size for SPF-Leaf Events as Medium
- Configuring Event History Buffer Size for SPF-Leaf Events as Large
- Deleting Event History Buffer Size for SPF-Leaf Events as Large
- Configuring Event History Buffer Size for LSP-Flood Events as Disabled
- Deleting Event History Buffer Size for LSP-Flood Events as Disabled
- Configuring Event History Buffer Size for LSP-Flood Events as Small
- Deleting Event History Buffer Size for LSP-Flood Events as Small
- Configuring Event History Buffer Size for LSP-Flood Events as Medium
- Deleting Event History Buffer Size for LSP-Flood Events as Medium
- Configuring Event History Buffer Size for LSP-Flood Events as Large
- Deleting Event History Buffer Size for LSP-Flood Events as Large
- Configuring Event History Buffer Size for MTR Events as Disabled
- Deleting Event History Buffer Size for MTR Events as Disabled
- Configuring Event History Buffer Size for MTR Events as Small
- Deleting Event History Buffer Size for MTR Events as Small
- Configuring Event History Buffer Size for MTR Events as Medium
- Deleting Event History Buffer Size for MTR Events as Medium
- Configuring Event History Buffer Size for MTR Events as Large
- Deleting Event History Buffer Size for MTR Events as Large
- Configuring Event History Buffer Size for Performance Events as Disabled
- Deleting Event History Buffer Size for Performance Events as Disabled
- Configuring Event History Buffer Size for Performance Events as Small
- Deleting Event History Buffer Size for Performance Events as Small
- Configuring Event History Buffer Size for Performance Events as Medium
- Deleting Event History Buffer Size for Performance Events as Medium
- Configuring Event History Buffer Size for Performance Events as Large
- Deleting Event History Buffer Size for Performance Events as Large
- Configuring Event History Buffer Size for Redist Events as Disabled
- Deleting Event History Buffer Size for Redist Events as Disabled
- Configuring Event History Buffer Size for Redist Events as Small
- Deleting Event History Buffer Size for Redist Events as Small
- Configuring Event History Buffer Size for Redist Events as Medium
- Deleting Event History Buffer Size for Redist Events as Medium
- Configuring Event History Buffer Size for Redist Events as Large
- Deleting Event History Buffer Size for Redist Events as Large
- Configuring Event History Buffer Size for SPF-Tree Events as Disabled
- Deleting Event History Buffer Size for SPF-Tree Events as Disabled
- Configuring Event History Buffer Size for SPF-Tree Events as Small
- Deleting Event History Buffer Size for SPF-Tree Events as Small
- Configuring Event History Buffer Size for SPF-Tree Events as Medium
- Deleting Event History Buffer Size for SPF-Tree Events as Medium
- Configuring Event History Buffer Size for SPF-Tree Events as Large
- Deleting Event History Buffer Size for SPF-Tree Events as Large
- Configuring Event History Buffer Size for SR Events as Disabled
- Deleting Event History Buffer Size for SR Events as Disabled
- Configuring Event History Buffer Size for SR Events as Small
- Deleting Event History Buffer Size for SR Events as Small
- Configuring Event History Buffer Size for SR Events Events as Medium
- Deleting Event History Buffer Size for SR Events Events as Medium
- Configuring Event History Buffer Size for SR Events Events as Large
- Deleting Event History Buffer Size for SR Events Events as Large
- Configuring Event History Buffer Size for TLV Events as Disabled
- Deleting Event History Buffer Size for TLV Events as Disabled
- Configuring Event History Buffer Size for TLV Events as Small
- Deleting Event History Buffer Size for TLV Events as Small
- Configuring Event History Buffer Size for TLV Events as Medium
- Deleting Event History Buffer Size for TLV Events as Medium
- Configuring Event History Buffer Size for TLV Events as Large
- Deleting Event History Buffer Size for TLV Events as Large
- Configuring Event History Buffer Size for ULIB Events as Disabled
- Deleting Event History Buffer Size for ULIB Events as Disabled
- Configuring Event History Buffer Size for ULIB Events as Small
- Deleting Event History Buffer Size for ULIB Events as Small
- Configuring Event History Buffer Size for ULIB Events as Medium
- Deleting Event History Buffer Size for ULIB Events as Medium
- Configuring Event History Buffer Size for ULIB Events as Large
- Deleting Event History Buffer Size for ULIB Events as Large
- Configuring Event History Buffer Size for URIB Events as Disabled
- Deleting Event History Buffer Size for URIB Events as Disabled
- Configuring Event History Buffer Size for URIB Events as Small
- Deleting Event History Buffer Size for URIB Events as Small
- Configuring Event History Buffer Size for URIB Events as Medium
- Deleting Event History Buffer Size for URIB Events as Medium
- Configuring Event History Buffer Size for URIB Events as Large
- Deleting Event History Buffer Size for URIB Events as Large
- Isolating this Router from BGP Perspective
- Deleting Config for Isolating this Router from BGP Perspective
- Configuring Adjacency Protocol Support Consistency Checker
- Deleting Adjacency Protocol Support Consistency Checker
- Configuring IPv4 BFD on all IS-IS interfaces
- Deleting IPv4 BFD on all IS-IS interfaces
- Configuring Distribution of Routes Between IS-IS Levels
- Deleting Distribution of Routes Between IS-IS Levels
- Configuring a Route Map to Constrain Distribution
- Deleting Distribution of Routes Between IS-IS Levels
- Configuring the Maximum Paths per Destination
- Deleting the Maximum Paths per Destination adjacency-check no adjacency-check
- Configuring IPv4 BFD on all IS-IS interfaces
- Deleting IPv4 BFD on all IS-IS interfaces
- Configuring to Apply Metric to Level-2 Links
- Configuring to Apply Metric to Level-2 Links
- Configuring Multitopology Transition Mode
- Deleting Multitopology Transition Mode
- Configuring a Policy to Constrain Redistribution
- Deleting a Policy to Constrain Redistribution
- Configuring a Policy to Constrain Redistribution (BGP)
- Deleting a Policy to Constrain Redistribution (BGP)
- Configuring a Policy to Constrain Redistribution (Directly Connected)
- Deleting a Policy to Constrain Redistribution (Directly Connected)
- Configuring a Policy to Constrain Redistribution (EIGRP)
- Deleting a Policy to Constrain Redistribution (EIGRP)
- Configuring Policy to Constrain Redistribution
- Deleting Policy to Constrain Redistribution
- Configuring a Policy to Constrain Redistribution (RIP)
- Deleting a Policy to Constrain Redistribution (RIP)
- Configuring a Policy to Constrain Redistribution (Static)
- Deleting a Policy to Constrain Redistribution (Static)
- Configuring L1|L2 Router to Set/Unset Attached Bit in its L1 LSP
- Deleting L1|L2 Router to Set/Unset Attached Bit in its L1 LSP
- Configuring Distribution of Routes Between IS-IS Levels
- Deleting Distribution of Routes Between IS-IS Levels
- Configuring a Route Map to Constrain Distribution
- Deleting Distribution of Routes Between IS-IS Levels
- Configuring Authentication Check for Level-1 LSP/CSNP/PSNPs
- Deleting Authentication Check or Level-1 LSP/CSNP/PSNPs
- Configuring Authentication Check for Level-2 LSP/CSNP/PSNPs
- Deleting Authentication Check for Level-2 LSP/CSNP/PSNPs
- Configuring IPv4 BFD on all IS-IS interfaces
- Deleting IPv4 BFD on all IS-IS interfaces
- Configuring to Suppress Level-2 PDU
- Deleting to Suppress Level-2 PDU
- Configuring a Policy to Constrain Redistribution
- Deleting a Policy to Constrain Redistribution
- Configuring a Policy to Constrain Redistribution (BGP)
- Deleting a Policy to Constrain Redistribution (BGP)
- Configuring a Policy to Constrain Redistribution (Directly Connected)
- Deleting a Policy to Constrain Redistribution (Directly Connected)
- Configuring a Policy to Constrain Redistribution (EIGRP)
- Deleting a Policy to Constrain Redistribution (EIGRP)
- Configuring a Policy to Constrain Redistribution (RIP)
- Deleting a Policy to Constrain Redistribution (RIP)
- Configuring a Policy to Constrain Redistribution (Static)
- Deleting a Policy to Constrain Redistribution (Static)
- Configuring L1|L2 Router to Set/Unset Attached Bit in its L1 LSP
- Deleting L1|L2 Router to Set/Unset Attached Bit in its L1 LSP
- Configuring Authentication Keychain for Level-1 IIHs
- Deleting Authentication Keychain for Level-1 IIHs
- Configuring the Authentication Type as Cleartext Level-1 IIHs
- Deleting the Authentication Type as Cleartext Level-1 IIHs
- Configuring the Authentication Type as Cleartext Level-2 IIHs
- Deleting the Authentication Type as Cleartext Level-2 IIHs
- Configuring the Authentication Type as MD5 Level-1
- Deleting the Authentication Type as MD5 Level-1
- Configuring the Authentication Type as MD5 Level 2
- Deleting the Authentication Type as MD5 Level 2
- Configuring Distribution of Routes Between IS-IS Levels
- Deleting Distribution of Routes Between IS-IS Levels
- Configuring a Route Map to Constrain Distribution
- Deleting Distribution of Routes Between IS-IS Levels
- Configuring Maximum Paths per Destination
- Deleting Maximum Paths per Destination
-
- Configuring a Standard Community List to Accept
- Deleting a Standard Community List to Accept
-
- Configuring a BGP Community with Graceful Shutdown
- Deleting a BGP Community with Graceful Shutdown
- Configuring No Community Attribute
- Deleting No Community Attribute
- Configuring a BGP Community to Not Send Outside Local AS
- Deleting a BGP Community to Not Send Outside Local AS
- Configuring No Community Attribute
- Deleting No Community Attribute
- Configuring the Address Match of a Route
- Deleting the Address Match of a Route
- Configuring Prepend to the AS-Path
- Deleting Prepend to the AS-Path
- Configuring Prepend Last AS to the AS-Path
- Deleting Prepend Last AS to the AS-Path
- Configuring the Tag as an AS-Path Attribute
- Deleting the Tag as an AS-Path Attribute
- Setting Route Map Operations
- Unsetting Route Map Operations
- Configuring IP Next Hop for a Route Map
- Deleting an IP Next Hop Configured for a Route Map
-
- Configuring a VRRPv3 Protocol Shutdown
- Deleting a VRRPv3 Protocol Shutdown
- Configuring an IPv6 Address
- Deleting an IPv6 Address
Configuring Unicast RPF (URPF)
- Configuring the Max Route Limit
- Deleting the Max Route Limit Configuration
- Configuring the Max Route Limit Threshold
- Deleting the Max Route Limit Threshold Configuration
- Configuring a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Deleting a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Configuring a Warning Message if Limit is Exceeded
- Deleting a Warning Message if Limit is Exceeded
- Configuring the Max Route Limit
- Deleting the Max Route Limit Configuration
- Configuring the Max Route Limit Threshold
- Deleting the Max Route Limit Threshold Configuration
- Configuring a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Deleting a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Configuring a Warning Message if Limit is Exceeded
- Deleting a Warning Message if Limit is Exceeded
-
- Configuring the ASN Notation to ASDOT Format
- Deleting the ASN Notation to ASDOT Format
-
- Configuring DSCP to be Used for Locally Originated Packets for IPv4 and IPv6
- Deleting DSCP to be Used for Locally Originated Packets for IPv4 and IPv6
- Configuring DSCP to be Used for Locally Originated Packets for IPv4 and IPv6 (Precedence 2)
- Deleting DSCP to be Used for Locally Originated Packets for IPv4 and IPv6 (Precedence 2)
-
- Configuring the Card Functionality so that the Card Powers Down when Both Ejectors are Open
- Deleting the Card Functionality so that the Card Powers Down when Both Ejectors are Open
Configuring Hardware Forwarding
- Configuring Debug Traces
- Deleting Debug Traces
Configuring Hardware Profile Settings
- Configuring the Maximum Limit of LPM (Non-Host) Entries
- Deleting the Maximum Limit of LPM (Non-Host) Entries
Configuring the System Routing Mode
- Configuring Hardware Floow Post-Routed Traffic on SVI
- Deleting Hardware Floow Post-Routed Traffic on SVI
Configuring the Site of Origin
- Configuring the Site of Origin
- Deleting the Site of Origin
-
- Configuring the Max Route Limit
- Deleting the Max Route Limit Configuration
- Configuring the Max Route Limit Threshold
- Deleting the Max Route Limit Threshold Configuration
- Configuring a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Deleting a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Configuring a Warning Message if Limit is Exceeded
- Deleting a Warning Message if Limit is Exceeded
- Configuring the Max Route Limit
- Deleting the Max Route Limit Configuration
- Configuring the Max Route Limit Threshold
- Deleting the Max Route Limit Threshold Configuration
- Configuring a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Deleting a Reinstall of a Previously Rejected Route Due to Over Max Route Limit
- Configuring a Warning Message if Limit is Exceeded
- Deleting a Warning Message if Limit is Exceeded
-
- Configuring a Shutdown
- Deleting a Configured Shutdown
- Configuring an NVE Multicast Group
- Deleting an NVE Multicast Group
Configuring BGP EVPN Filtering
- Matching MAC List Enteries
- Deleting Configured MAC List Enteries Matches
- Matching BGP EVPN Routes
- Deleting Configured Match of BGP EVPN Routes
- Configuring a Match for BGP EVPN Routes Type 2
- Deleting a Match for BGP EVPN Routes Type 2
- Configuring a Match for BGP EVPN Route Type 2 MAC-IP
- Deleting a Match for BGP EVPN Route MAC-IP in Type 2 MAC-IP
- Configuring a Match for BGP EVPN Route Type 2 MAC Only
- Deleting a Match for BGP EVPN Route Type 2 MAC Only
- Configuring a Match for BGP EVPN Route Type 3
- Deleting a Match for BGP EVPN Route Type 3
- Configuring a Match for BGP EVPN Route Type 4
- Deleting a Match for BGP EVPN Route Type 4
- Configuring a Match for BGP EVPN Route Type 5
- Deleting a Match for BGP EVPN Route Type 5
- Configuring a Match for BGP EVPN Route Type 6
- Deleting a Match for BGP EVPN Route Type 6
- Matching BGP Community Lists
- Deleting the Configured BGP Community List Matches
- Setting Gateway IP for Type 5 EVPN Routes
- Deleting the Set Gateway IP for Type 5 EVPN Routes
- Building a MAC List (Permit)
- Deleting a MAC List (Permit)
- Building a MAC List (Deny)
- Deleting a MAC List (Deny)
- Configuring a Table Map
- Deleting a Table Map
- Configuring a Filtered Table Map
- Deleting a Filtered Table Map
- Configuring a Generic Extended Community With No Generic Attribute
- Deleting a Generic Extended Community With No Generic Attribute
- Adding to an Existing Generic Extended Community
- Deleting an Addition to an Existing Generic Extended Community
- Adding to an Existing RT Extended Community
- Deleting an Addition to an Existing RT Extended Community
- Comparing IGP Cost
- Deleting an IGP Cost Comparison
- Comparing Before All Other Steps in Bestpath Calculation
- Deleting a Comparison Made Before All Other Steps in Bestpath Calculation
- Configuring a Color Extended Community
- Deleting a Color Extended Community
- Matching the BGP EVPN Route Type
- Deleting the BGP EVPN Route Type Match Configuration
- Configuring Match Entries of MAC Lists
- Deleting Match Entries of MAC Lists
-
- Matching the IP Address of a Route
- Deleting the Configured IP Address Match of a Route
-
- Configuring ECMP Reuse to Scale
- Deleting ECMP Reuse to Scale
-
- Configuring a Description
- Deleting a Description
- Configuring an NVE Multicast Group
- Deleting an NVE Multicast Group
- Configuring a Static Virtual RMAC
- Deleting a Static Virtual RMAC
- Configuring a Global Multicast Group for L2 VNIs
- Deleting a Global Multicast Group for L2 VNIs
- Configuring a Global Multicast Group for L3 VNIs
- Deleting a Multicast Group for L3 VNIs
- Configuring an Anycast Loopback Interface
- Deleting an Anycast Loopback Interface
- Configuring a Hold Source Loopback Down Time
- Deleting a Hold Source Loopback Down Time
Configuring the Baseboard Management Controller
- Configuring a BMC IP Address (IPv4)
- Deleting a BMC IP Address (IPv4)
- Configuring a BMC IP Address (IPv6)
- Deleting a BMC IP Address (IPv6)
-
- Installing Feature-Set FEX
- Disabling Feature-Set FEX
-
- Reversing the Order of the Module Power Up
- Deleting the Order of the Module Power Up
-
- Configuring the Local Port Range for Kstack
- Deleting the Local Port Range for Kstack
Configuring Virtual Device Contexts
- Configuring a VDC Id
- Configuring IPv4 Route Memory Limits
- Deleting IPv4 Route Memory Limits
- Configuring IPv6 Route Memory Limits
- Deleting IPv6 Route Memory Limits
- Configuring IPv4 Route Memory Limits
- Deleting IPv4 Route Memory Limits
- Configuring IPv6 Route Memory Limits
- Deleting IPv6 Route Memory Limits
- Configuring VLAN Limits
- Deleting VLAN Limits
- Configuring VLAN Limits to Max Value Equals Min Value
- Deleting VLAN Limits to Max Value Equals Min Value
- Configuring VRF Resource Limits
- Deleting VRF Resource Limits
- Configuring the Port Channel Limits
- Deleting the Port Channel Limits
Querying Configurations (Show Commands)
- Querying Forwarding Route Information
- Querying IP Route Details
Release 9.3(3)
Configuring a BGP Neighbor (Ethernet Interface)
- Configuring a BGP Neighbor
- Configuring the Log Message for Neighbor Up/Down Events
- Deleting the Log Message for Neighbor Up/Down Events
- Configuring Peer Inheritance
- Deleting Peer Inheritance
- Configuring a Password for a Neighbor
- Deleting a Password for a Neighbor
- Configuring a Passive Connection Setup Only
- Deleting a Passive Connection Setup Only
- Configuring an IPv4 Unicast Subaddress Family
- Deleting an IPv4 Unicast Subaddress Family
- Configuring an IPv6 Multicast Subaddress Family
- Deleting an IPv6 Multicast Subaddress Family
- Configuring an IPv6 Unicast Subaddress Family
- Deleting an IPv6 Unicast Subaddress Family
- Configuring a VPNv4 Unicast Subaddress Family
- Deleting a VPNv4 Unicast Subaddress Family
- Configuring a VPNv6 Unicast Subaddress Family
- Deleting a VPNv6 Unicast Subaddress Family
- Configuring a Link-State Address Family
- Deleting a Link-State Address Family
- Configuring IPv6 Multicast VPN (MVPN)
- Deleting IPv6 Multicast VPN (MVPN)
- Configuring an L2VPN EVPN Address Family
- Deleting an L2VPN EVPN Address Family
- Configuring Bidirectional Fast Detection for the Neighbor
- Deleting Bidirectional Fast Detection for the Neighbor
- Configuring an Excemption Behavior for Low Memory Situations
- Deleting an Excemption Behavior for Low Memory Situations
- Configuring Peer-Session Inheritance
- Deleting Peer-Session Inheritance
- Configuring a BMP Monitoring for a Peer
- Deleting a BMP Monitoring for a Peer
- Configuring an AS Number of a Neighbor
- Deleting an AS Number of a Neighbor
- Configuring a Connection Using Either the Local AS or the Real AS
- Deleting a Connection Using Either the Local AS or the Real AS
- Configuring a Neighbor-Specific Description
- Deleting a Neighbor-Specific Description
- Configuring the Administrative Shutdown of a Neighbor
- Deleting the Administrative Shutdown of a Neighbor
- Configuring a Route Map to Modify Attributes for Outbound
- Deleting a Route Map to Modify Attributes for Outbound
- Configuring Nonnegotiable Capability with this Neighbor
- Deleting Nonnegotiable Capability with this Neighbor
- Configuring Dynamic Capability
- Deleting Dynamic Capability
- Configuring Private AS Number Removal from Outbound Updates (All)
- Deleting Private AS Number Removal from Outbound Updates (All)
- Configuring Private AS Number Removal (Replace AS)
- Deleting Private AS Number Removal (Replace AS)
- Configuring Disable Check for Directly Connected Peers
- Deleting Disable Check for Directly Connected Peers
- Configuring 4-Byte AS Capability Suppression
- Deleting 4-Byte AS Capability Suppression
- Configuring Hop Counts for a Remote Peer
- Deleting Hop Counts for a Remote Peer
- Deleting Keepalive and Hold Timers
- Configuring the DSCP Value for Locally Originated Packets
- Deleting the DSCP Value for Locally Originated Packets
- Configuring AF41 DSCP
- Deleting AF41 DSCP
- Configuring a Fabric Border Leaf
- Deleting a Fabric Border Leaf
- Configuring Fabric External
- Deleting Fabric External
- Configuring an Affinity Group Id
- Deleting an Affinity Group Id
- Configuring a Link State Address Family
- Deleting a Link State Address Family
Configuring an IPv4 Unicast Subaddress Family Under a BGP Neighbor (Ethernet Interface)
- Configuring Peer Policy Inheritance
- Deleting Peer Policy Inheritance
- Configuring AS Path Acceptance
- Deleting AS Path Acceptance
- Configuring Override Matching AS Number While Sending Updates
- Deleting Override Matching AS Number While Sending Updates
- Configuring to Disable Peer AS Number Check While Advertising
- Deleting to Disable Peer AS Number Check While Advertising
- Configuring to Send Standard and Extended Community Attributes
- Deleting to Send Standard and Extended Community Attributes
- Configuring to Send Standard Community Attributes
- Deleting to Send Standard Community Attributes
- Configuring the Extended Community Attribute
- Deleting the Extended Community Attribute
- Configuring a Neighbor as Route-Reflector Client
- Deleting a Neighbor as Route-Reflector Client
- Configuring the Default Weight for Routes from a Neighbor
- Deleting the Default Weight for Routes from a Neighbor
- Configuring the Default Weight for Routes from a Neighbor
- Deleting the Default Weight for Routes from a Neighbor
- Configuring an IPv4 Unicast Address Family
- Configuring a Policy Application to Incoming Routes
- Deleting a Policy Application to Incoming Routes
- Configuring Policy Application (Filter List)
- Deleting Policy Application (Filter List)
- Configuring a BGP Connection Restart After a Limit is Exceeded
- Deleting a BGP Connection Restart After a Limit is Exceeded
- Configuring a Warning Message when a Limit is Exceeded
- Deleting a Warning Message when a Limit is Exceeded
- Configuring the Minimum Interval Between Sending BGP Routing Updates
- Deleting the Minimum Interval Between Sending BGP Routing Updates
- Configuring Advertise Only Active Routes to a Peer
- Deleting Advertise Only Active Routes to a Peer
- Configuring a Route Map to Specify Criteria for Originating Default
- Deleting a Route Map to Specify Criteria for Originating Default
- Configuring Our Address as Nexthop for All Routes
- Deleting Our Address as Nexthop for All Routes
- Configuring a Third-Party Nexthop
- Deleting a Third-Party Nexthop
- Configuring to Advertise a Route with Local Label to Peer
- Deleting to Advertise a Route with Local Label to Peer
- Configuring to Always Perform Inbound Soft Reconfiguration
- Deleting to Always Perform Inbound Soft Reconfiguration
- Configuring a Route Map Condition to Advertise Only When a Prefix in Condition Does Not Exist
- Deleting a Route Map Condition to Advertise Only When a Prefix in Condition Does Not Exist
- Configuring Auto SOO Generation
- Deleting Auto SOO Generation
- Configuring to Not Advertise Additional Paths (Send Capability)
- Deleting to Not Advertise Additional Paths (Send Capability)
- Configuring to Not Advertise Additional Paths (Receive Capability)
- Deleting to Not Advertise Additional Paths (Receive Capability)
- Configuring a Route Map to Selectively Unsuppress Suppressed Routes
- Deleting a Route Map to Selectively Unsuppress Suppressed Routes
Configuring an IPv6 MVPN Subaddress Family Under a BGP Neighbor (Ethernet Interface)
- Configuring Peer Policy Inheritance
- Deleting Peer Policy Inheritance
- Configuring AS Path Acceptance with My AS Present In It
- Deleting AS Path Acceptance with My AS Present In It
- Configuring to Disable Peer AS Number Check While Advertising
- Deleting to Disable Peer AS Number Check While Advertising
- Configuring to Send Standard and Extended Community Attributes
- Deleting to Send Standard and Extended Community Attributes
- Configuring to Send Standard Community Attributes
- Deleting to Send Standard Community Attributes
- Configuring the Extended Community Attribute
- Deleting the Extended Community Attribute
- Configuring a Neighbor as Route-Reflector Client
- Deleting a Neighbor as Route-Reflector Client
- Configuring Policy Application to Incoming Routes
- Deleting Policy Application to Incoming Routes
- Configuring Policy Application (Prefix List)
- Deleting Policy Application (Prefix List)
- Configuring a Policy Application to Incoming Routes
- Deleting a Policy Application to Incoming Routes
- Configuring Policy Application (Filter List)
- Deleting Policy Application (Filter List)
- Configuring BGP Connection Restart After a Limit is Exceeded
- Deleting BGP Connection Restart After a Limit is Exceeded
- Configuring a Warning Message When a Limit is Exceeded
- Deleting a Warning Message When a Limit is Exceeded
- Configuring to Always Perform Inbound Soft Reconfiguration
- Deleting to Always Perform Inbound Soft Reconfiguration
- Configuring to Not Advertise Additional Paths (Send Capability)
- Deleting to Not Advertise Additional Paths (Send Capability)
- Configuring to Not Advertise Additional Paths (Receive Capability)
- Deleting to Not Advertise Additional Paths (Receive Capability)
- Configuring Automatic RT Generation for EBGP Neighbors
- Deleting Automatic RT Generation for EBGP Neighbors
Configuring an L2VPN EVPN Subaddress Family Under a BGP Neighbor (Ethernet Interface)
- Configuring Peer Policy Inheritance
- Deleting Peer Policy Inheritance
- Configuring an AS path with my AS Present In It
- Deleting an AS path with my AS Present In It
- Configuring Override Matching AS Number While Sending Updates
- Deleting Override Matching AS Number While Sending Updates
- Configuring to Disable Peer AS Number Check While Advertising
- Deleting to Disable Peer AS Number Check While Advertising
- Configuring to Send Standard and Extended Community Attributes
- Deleting to Send Standard and Extended Community Attributes
- Configuring to Send Standard Community Attributes
- Deleting to Send Standard Community Attributes
- Configuring the Extended Community Attribute
- Deleting the Extended Community Attribute
- Configuring a Neighbor as Route-Reflector Client
- Deleting a Neighbor as Route-Reflector Client
- Configuring Policy Application to Incoming Routes
- Deleting Policy Application to Incoming Routes
- Configuring Policy Application (Prefix List)
- Deleting Policy Application (Prefix List)
- Configuring a Policy Application to Incoming Routes
- Deleting a Policy Application to Incoming Routes
- Configuring Policy Application (Filter List)
- Deleting Policy Application (Filter List)
- Configuring BGP Connection Restart After a Limit is Exceeded
- Deleting BGP Connection Restart After a Limit is Exceeded
- Configuring a Warning Message When a Limit is Exceeded
- Deleting a Warning Message When a Limit is Exceeded
- Configuring Gateway IP Advertisement in Type-5 Routes to a Neighbor
- Deleting Gateway IP Advertisement in Type-5 Routes to a Neighbor
Configuring a VPNv4 Unicast Subaddress Family Under a BGP Neighbor (Ethernet Interface)
- Configuring Peer Policy Inheritance
- Deleting Peer Policy Inheritance
- Configuring As Path Acceptance with My AS Present In It
- Deleting As Path Acceptance with My AS Present In It
- Configuring to Send Standard and Extended Community Attributes
- Deleting to Send Standard and Extended Community Attributes
- Configuring to Send Standard Community Attributes
- Deleting to Send Standard Community Attributes
- Configuring the Extended Community Attribute
- Deleting the Extended Community Attribute
- Configuring a Neighbor as Route-Reflector Client
- Deleting a Neighbor as Route-Reflector Client
- Configuring the Default Weight for Routes from a Neighbor
- Deleting the Default Weight for Routes from a Neighbor
- Configuring Policy Application to Incoming Routes
- Deleting Policy Application to Incoming Routes
- Configuring Policy Application (Prefix List)
- Deleting Policy Application (Prefix List)
- Configuring a Policy Application to Incoming Routes
- Deleting a Policy Application to Incoming Routes
- Configuring Policy Application (Filter List)
- Deleting Policy Application (Filter List)
- Configuring BGP Connection Restart After a Limit is Exceeded
- Deleting BGP Connection Restart After a Limit is Exceeded
- Configuring a Warning Message When a Limit is Exceeded
- Deleting a Warning Message When a Limit is Exceeded
- Configuring the Minimum Interval Between Sending BGP Routing Updates
- Deleting the Minimum Interval Between Sending BGP Routing Updates
- Configuring Our Address as Nexthop for All Routes
- Deleting Our Address as Nexthop for All Routes
- Configuring to Not Advertise Additional Paths (Send Capability)
- Deleting to Not Advertise Additional Paths (Send Capability)
- Configuring to Not Advertise Additional Paths (Receive Capability)
- Deleting to Not Advertise Additional Paths (Receive Capability)
- Configuring a Route Map to Selectively Unsuppress Suppressed Routes
- Deleting a Route Map to Selectively Unsuppress Suppressed Routes
Configuring a VPNv6 Unicast Subaddress Family Under a BGP Neighbor (Ethernet Interface)
- Configuring Peer Policy Inheritance
- Deleting Peer Policy Inheritance
- Configuring an AS path with my AS Present In It
- Deleting an AS path with my AS Present In It
- Configuring to Send Standard and Extended Community Attributes
- Deleting to Send Standard and Extended Community Attributes
- Configuring to Send Standard Community Attributes
- Deleting to Send Standard Community Attributes
- Configuring the Extended Community Attribute
- Deleting the Extended Community Attribute
- Configuring a Neighbor as Route-Reflector Client
- Deleting a Neighbor as Route-Reflector Client
- Configuring the Default Weight for Routes from a Neighbor
- Deleting the Default Weight for Routes from a Neighbor
- Configuring the Default Weight for Routes from a Neighbor
- Deleting the Default Weight for Routes from a Neighbor
- Configuring Policy Application to Incoming Routes
- Deleting Policy Application to Incoming Routes
- Configuring Policy Application (Prefix List)
- Deleting Policy Application (Prefix List)
- Configuring a Policy Application to Incoming Routes
- Deleting a Policy Application to Incoming Routes
- Configuring Policy Application (Filter List)
- Deleting Policy Application (Filter List)
- Configuring BGP Connection Restart After a Limit is Exceeded
- Deleting BGP Connection Restart After a Limit is Exceeded
- Configuring a Warning Message when a Limit is Exceeded
- Deleting a Warning Message when a Limit is Exceeded
- Configuring the Minimum Interval Between Sending BGP Routing Updates
- Deleting the Minimum Interval Between Sending BGP Routing Updates
- Configuring Our Address as Nexthop for All Routes
- Deleting Our Address as Nexthop for All Routes
- Configuring to Not Advertise Additional Paths (Send Capability)
- Deleting to Not Advertise Additional Paths (Send Capability)
- Configuring to Not Advertise Additional Paths (Receive Capability)
- Deleting to Not Advertise Additional Paths (Receive Capability)
- Configuring a Route Map to Selectively Unsuppress Suppressed Routes
- Deleting a Route Map to Selectively Unsuppress Suppressed Routes
Configuring a BGP Neighbor (IP Address)
- Configuring Path Attribute Filtering on Inbound Updates
- Deleting Path Attribute Filtering on Inbound Updates
- Configuring Withdrawing Routes for Matching Path Attributes from a Neighbor
- Deleting Withdrawing Routes for Matching Path Attributes from a Neighbor
- Discarding a Matching Path-Attribute from a Neighbor
- Unconfiguring the Discarding of a Matching Path-Attribute from a Neighbor
- Withdrawing Routes for Matching Path-Attribute from a Neighbor
- Unconfiguring the Withdrawing of Routes for Matching Path-Attribute from a Neighbor
- Configuring Path Attribute Filtering on Inbound Updates (Inherited from a Peer)
- Deleting Path Attribute Filtering on Inbound Updates (Inherited from a Peer)
Configuring an IPv4 Unicast Subaddress Family for a BGP Neighbor (Ethernet Interface) Under a VRF
- Configuring an IPv4 Unicast Address Family
- Deleting an IPv4 Unicast Address Family
- Configuring an IPv6 Multicast Subaddress Family
- Deleting an IPv6 Multicast Subaddress Family
Configuring an IPv6 Unicast Subaddress Family for a BGP Neighbor (Ethernet Interface) Under a VRF
- Configuring an IPv6 Unicast Subaddress Family
- Deleting an IPv6 Unicast Subaddress Family
- Configuring AS Path Acceptance with my AS Present In It
- Deleting AS Path Acceptance with my AS Present In It
- Configuring Override Matching AS Number While Sending Updates
- Deleting Override Matching AS Number While Sending Updates
- Configuring to Disable Peer AS Number Check While Advertising
- Deleting to Disable Peer AS Number Check While Advertising
- Configuring an AS path with my AS Present In It
- Deleting an AS path with my AS Present In It
- Configuring Override Matching AS Number While Sending Updates
- Deleting Override Matching AS Number While Sending Updates
- Configuring to Disable Peer AS Number Check While Advertising
- Deleting to Disable Peer AS Number Check While Advertising
- Configuring Auto SOO Generation
- Deleting Auto SOO Generation
Configuring a BGP Neighbor (Ethernet Interface) Under a VRF
- Configuring the AS Number of the Neighbor
- Deleting a BGP Neighbor remote-as 123
- Configuring Peer Inheritance
- Deleting Peer Inheritance
- Configuring a Password for a Neighbor
- Deleting a Password for a Neighbor
- Configuring a Passive Connection Setup Only
- Deleting a Passive Connection Setup Only
-
- Configuring BGP Enhanced-Error Handling
- Deleting BGP Enhanced-Error Handling
-
- Enabling the Configured Timezone in Debugs
- Deleting the Configured Timezone in Debugs
- Enabling the configured Timezone in Syslogs
- Deleting the Configured Timezone in Syslogs
-
- Checking for Exact Match Only
- Deleting Checking for Exact Match Only
- Checking for Exact and Partial Match Keyword
- Deleting Checking for Exact and Partial Match Keyword
- Configuring a Variable
- Deleting a Variable
Changing the Memory Size the Guest Shell Uses and Querying the Result
- Changing the Memory Size the Guest Shell Uses
- Querying the Result of the Guest Shell Memory Change Request (Example 1)
- Querying the Result of the Guest Shell Memory Change Request (Example 2)
Change Virtual Service Global Configuration
- Configuring the Virtual Service Signing Policy to Allow Unsigned Packages
- Deleting the Virtual Service Signing Policy Configuration
Changing the CPU Memory Size that the Guest Shell Uses and Querying the Result
- Changing the Amount of CPU the Guest Shell Uses
Destroying the Guest Shell and Querying the Result
- Destroying the Guest Shell
- Querying the Result of the Guest Shell Destroy Request (Example 1)
- Querying the Result of the Guest Shell Destroy Request (Example 2)
Disabling the Guest Shell and Querying the Result
- Disabling the Guest Shell
- Querying the Result of the Guest Shell Disable Request (Example 1)
- Querying the Result of the Guest Shell Disable Request (Example 2)
Enabling the Guest Shell and Querying the Result
- Enabling the Guest Shell Using the Default Package
- Querying the Result of the Guest Shell Enable Result (Example 1)
- Querying the Result of the Guest Shell Enable Result (Example 2)
- Querying the Guest Shell Status
- Enabling the Guest Shell Using a Specified Package
Exporting the Guest Shell Rootfs and Querying the Result
- Exporting the Guest Shell Rootfs
- Querying the Result of Exporting the Guest Shell Rootfs (Example 1)
- Querying the Result of Exporting the Guest Shell Rootfs (Example 2)
Increasing the Guest Shell Rootfs Size and Querying the Result
- Increasing the Guest Shell Rootfs Size
- Querying the Result of the Guest Shell Resize Request (Example 1)
- Querying the Result of the Guest Shell Resize Request (Example 2)
Querying Guest Shell Information
- Obtaining Guest Shell Status
- Obtaining Guestshell Resource Information
- Obtaining Guestshell Information
Rebooting the Guest Shell and Querying the Result
- Rebooting the Guest Shell
- Querying the Result of the Guest Shell Reboot Request (Example 1)
- Querying the Result of the Guest Shell Reboot Request (Example 2)
Syncing the Guest Shell Rootfs to the Standby Supervisor and Querying the Result
- Syncing the Guest Shell Rootfs to the Standby Supervisor
- Querying the Result of Syncing the Guest Shell Rootfs to the Standby Supervisor (Example 1)
- Querying the Result of Syncing the Guest Shell Rootfs to the Standby Supervisor(Example 2)
Upgrading the Guest Shell Rootfs and Querying the Result
- Upgrading the Guest Shell Rootfs
- Querying the Result of Upgrading the Guest Shell Rootfs (Example 1)
- Querying the Result of Upgrading the Guest Shell Rootfs (Example 2)
Configuring a System Module Action
- Configuring Emon Enhanced Support
- Deleting Emon Enhanced Support
- Configuring Emon Enhanced Slow Timeout
- Configuring an Ethernet Port
- Deleting an Ethernet Port
- Configuring an FC Port
- Deleting and FC Port
Configuring SVI Autostate Exclude (Ethernet Interface Range)
- Configuring Exception List
- Deleting Exception List
- Configuring a List of VLANs Excepted from Auto-State Exclude
- Configuring a Remove VLANs from Except List
Configuring SVI Autostate Exclude (Ethernet Interface)
- Configuring VLAN Exception List
- Deleting VLAN Exception List
- Configuring Exclude All VLANs
- Configuring List of VLANs Excepted from Auto-State Exclude
- Configuring Remove VLANs from Except List
Configuring an Ethernet Interface
- Configuring Shutdown for All LAN VLANs on an Interface
- Deleting Shutdown for All LAN VLANs on an Interface
- Configuring UPDOWN and CHANGE Messages
- Deleting UPDOWN and CHANGE Messages
- Configuring UPDOWN and CHANGE Messages (Using the Default Value)
- Deleting UPDOWN and CHANGE Messages (Using the Default Value)
- Configuring SNMP LINKUP and LINKDOWN Traps
- Deleting SNMP LINKUP and LINKDOWN Traps
Configuring an Ethernet Subinterface
- Configuring UPDOWN and CHANGE Messages
- Deleting UPDOWN and CHANGE Messages
- Configuring UPDOWN and CHANGE Messages (Using the Default Value)
- Deleting UPDOWN and CHANGE Messages (Using the Default Value)
- Configuring SNMP LINKUP and LINKDOWN Traps
- Deleting SNMP LINKUP and LINKDOWN Traps
Configuring Global CoS for L2 Protocol Tunnel Ports
- Configuring CoS
- Deleting CoS
Configuring Layer 2 Protocol Tunneling on an Ethernet Interface
- Configuring L2PT for CDP
- Deleting L2PT for CDP
- Configuring l2pt for STP
- Deleting l2pt for STP
- Configuring l2pt for VTP
- Deleting l2pt for VTP
- Configuring l2pt Drop Threshold for CDP
- Deleting l2pt Drop Threshold for CDP
- Configuring l2pt Drop Threshold for STP
- Deleting l2pt Drop Threshold for STP
- Configuring l2pt Drop Threshold for VTP
- Deleting l2pt Drop Threshold for VTP
- Deleting l2pt Shut Threshold for CDP
- Configuring l2pt Shut Threshold for STP
- Deleting l2pt Shut Threshold for STP
- Configuring l2pt Shut Threshold for VTP
- Deleting l2pt Shut Threshold for VTP
- Configuring L2PT Allow-Double-Tag
- Deleting L2PT Allow-Double-Tag
-
- Configuring MGMT Port as Auto
- Configuring MGMT Port rj45
- Configuring MGMT Port sfp
-
- clear nat itd
Configuring SVI Autostate Exclude (Port-Channel Interface Range)
- Configuring VLANs Exception List
- Deleting VLANs Exception List
- Configuring Exclude All VLANs
- Configuring List of VLANs to Excepted from Auto-State Exclude
- Configuring Remove VLANs from Exception List
Configuring SVI Autostate Exclude (Port-Channel Interface)
- Configuring Add VLANs to Except List
- Deleting Add VLANs to Except List
- Configuring Exclude All VLANs
- Configuring List of VLANs to Excepted from Auto-State Exclude
- Configuring Remove VLANs from Except List
Configuring a Port-Channel Subinterface
- Configuring UPDOWN and CHANGE Messages
- Deleting UPDOWN and CHANGE Messages
- Configuring UPDOWN and CHANGE Messages (Using the Default Value)
- Deleting UPDOWN and CHANGE Messages (Using the Default Value)
- Configuring SNMP LINKUP and LINKDOWN Traps
- Deleting SNMP LINKUP and LINKDOWN Traps
Configuring a Port Channel Interface
- Configuring UPDOWN and CHANGE Messages
- Deleting UPDOWN and CHANGE Messages
- Configuring UPDOWN and CHANGE Messages (Using the Default Value)
- Deleting UPDOWN and CHANGE Messages (Using the Default Value)
- Configuring SNMP LINKUP and LINKDOWN Traps
- Deleting SNMP LINKUP and LINKDOWN Traps
- Enabling Port-Channel Fast Convergence
- Disabling Port-Channel Fast Convergence
- Configuring Symmetric Load Balancing
- Unconfiguring Symmetric Load Balancing
Configuring an SVI TCAM Region
- Configuring TCAM for SVI Counters Region
- Deleting TCAM for SVI Counters Region
Configuring a MAC Address Limitation
- Configuring Restriction of MAC Addresses Learned System Wide
- Deleting Restriction of MAC Addresses Learned System Wide
- Configuring Restriction of MAC Addresses Learned for a VLAN
- Deleting Restriction of MAC Addresses Learned for a VLAN
- Configuring Restriction of MAC Addresses Learned for an Interface
- Deleting Restriction of MAC Addresses Learned for an Interface
-
- Configuring the Time in Seconds Between UDLD Probe Messages
- Deleting the Time in Seconds Between UDLD Probe Messages
-
- Configuring the Max Number of History Buckets to Collect
- Deleting the Max Number of History Buckets to Collect
-
- Configuring the Max Number of History Buckets to Collect
- Deleting the Max Number of History Buckets to Collect
Configuring an ICMP-Echo Operation
- Configuring the Max Number of History Buckets to Collect
- Deleting the Max Number of History Buckets to Collect
Configuring a TCP Connect Operation
- Configuring the Max Number of History Buckets to Collect
- Deleting the Max Number of History Buckets to Collect
Configuring a UDP-Echo Operation
- Configuring the Max Number of History Buckets to Collect
- Deleting the Max Number of History Buckets to Collect
Configuring a UDP-Jitter Operation
- Configuring the Max Number of History Buckets to Collect
- Deleting the Max Number of Statistics Distribution Buckets to Capture
-
- Configuring Syslog Traps
- Deleting Syslog Traps
- Configuring the Port on Which to Listen
- Deleting the Port on Which to Listen
- Configuring the Port on Which to Listen
- Deleting the Port on Which to Listen
- Configuring TWAMP Responder
- Deleting TWAMP Responder
- Configuring IPSLA IPPM TWAMP Server
- Deleting IPSLA IPPM TWAMP Server
- Configuring IP SLA Reset
-
- Configuring a Port Group
- Deleting a Port Group
- Configuring an Egress Interface for a Port Group
- Deleting an Egress Interface for a Port Group
- Configuring a Port Group for an ITD Service
- Deleting a Port Group for an ITD Service
-
- Configuring a ITD Over VXLAN Probe Source-Interface
- Deleting a ITD Over VXLAN Probe Source-Interface
-
- Configuring Replace Operation Abort
- Configuring Commit
Configuring an ITD Source VLAN
- Configuring a Source for ITD L2 Traffic
- Deleting a Source for ITD L2 Traffic
-
- Deleting ITD Statistics
Configuring Switchport Backup for an Ethernet Interface
- Configuring Preemption Mode
- Deleting Preemption Mode
- Configuring Fast Convergence on a Backup Interface
- Deleting Fast Convergence on a Backup Interface
Configuring Switchport Backup for a Port-Channel Interface
- Configuring Preemption Delay
- Deleting Preemption Delay
- Configuring Preemption Mode
- Deleting Preemption Mode
- Configuring Fast Convergence on a Backup Interface
- Deleting Fast Convergence on a Backup Interface
Configuring a MAC Address Table
- Configuring Port-Down Action for MAC Loop Detection
- Deleting Port-Down Action for MAC Loop Detection
- Configuring MAC-Move Notification on Syslog
- Deleting MAC-Move Notification on Syslog
-
- Configuring the Bridge Priority for the Spanning Tree (VLAN Switch)
- Deleting the Bridge Priority for the Spanning Tree (VLAN Switch)
- CLEAR DOMAIN STATS
- Confirming Clear Domain Stats
- Configuring the Bridge Priority for the Spanning Tree (MST Config)
- Deleting the Bridge Priority for the Spanning Tree (MST Config)
- Configuring the Root Bridge Priority for the Spanning Tree (MST Config)
- Deleting the Root Bridge Priority for the Spanning Tree (MST Config)
- Configuring the Root Bridge Priority for the Spanning Tree (VLAN Switch)
- Deleting the Root Bridge Priority for the Spanning Tree (VLAN Switch)
-
- Configuring 128 Character VLAN Names
- Deleting 128 Character VLAN Names
Disabling MPLS Forwarding for IP
- Configuring Administrative Shutdown of the LDP Protocol
- Deleting Administrative Shutdown of the LDP Protocol
Configuring Explicit Null Label Advertisement
- Configuring Explicit Null for a Prefix List Advertised to All Peers
- Deleting Explicit Null for a Prefix List Advertised to All Peers
- Configuring Explicity Null to Specific Peers
- Deleting Explicity Null to Specific Peers
- Configuring Explicit Null for a Prefix List Advertised to Specific Peers
- Deleting Explicit Null for a Prefix List Advertised to Specific Peers
- Configuring Explicit Null Label Advertisement in Place of Implicit Null
- Deleting Explicit Null Label Advertisement in Place of Implicit Null
Configuring Label Advertisement
- Configuring Label Advertisements
- Deleting Label Advertisements
- Configuring Label Advertisements for a Prefix List to All Peers
- Deleting Label Advertisements for a Prefix List to All Peers
- Configuring Label Advertisements for a Prefix List to Specific Peers
- Deleting Label Advertisements for a Prefix List to Specific Peers
- Configuring Label Advertisements for a Prefix Constructed from an Interface Address and a 32-bit Mask
- Deleting Label Advertisements for a Prefix Constructed from an Interface Address and a 32-bit Mask
-
- Configuring Local Label Allocation for All Routes
- Deleting Local Label Allocation for All Routes
- Configuring Local Label Allocation for Host Routes Only (Default)
- Deleting Local Label Allocation for Host Routes Only (Default)
- Configuring Global Prefix List Label Allocation
- Deleting Global Prefix List Label Allocation
-
- Configuring LDP Discovery Hello Interval
- Deleting LDP Discovery Hello Interval
- Configuring the Router to Respond to Requests for Targeted-Hello Messages from All Neighbors
- Deleting the Router to Respond to Requests for Targeted-Hello Messages from All Neighbors
- Configuring the Router to Respond to Requests for Targeted-Hello Messages from Neighbors Specified by the Prefix List
- Deleting the Router to Respond to Requests for Targeted-Hello Messages from Neighbors Specified by the Prefix List
- Configuring Discovery Hello Holdtime for Nondirectly Connected LDP Sessions
- Deleting Discovery Hello Holdtime for Nondirectly Connected LDP Sessions
- Configuring Discovery Hello Interval for Nondirectly Connected LDP Sessions
- Deleting Discovery Hello Interval for Nondirectly Connected LDP Sessions
- Configuring LDP Discovery Hello Holdtime
- Deleting LDP Discovery Hello Holdtime
Configuring LDP Graceful Restart
- Configuring LDP Graceful Restart
- Deleting LDP Graceful Restart
- Configuring Forwarding State Holding Time
- Deleting Forwarding State Holding Time
- Configuring the Maximum Recovery Time
- Deleting the Maximum Recovery Time
- Configuring the Neighbor-Liveness Time
- Deleting the Neighbor-Liveness Time
-
- Configuring the LDP Hello Holdtime
- Deleting the LDP Hello Holdtime
- Configuring Infinite LDP Session Holdtime
- Deleting Infinite LDP Session Holdtime
-
- Configuring Session Protection Parameters
- Deleting Session Protection Parameters
-
- Configuring Neighbor Changes
- Deleting Neighbor Changes
- Configuring Password Configuration Logging
- Deleting Password Configuration Logging
- Configuring Password Configuration Rate-Limit Logging
- Deleting Password Configuration Rate-Limit Logging
- Configuring Password Rollover Logging
- Deleting Password Rollover Logging
- Configuring Password Rollover Rate-Limit Logging
- Deleting Password Rollover Rate-Limit Logging
-
- Configuring the LDP Fallback Password
- Deleting the LDP Fallback Password
- Configuring LDP Password Option
- Deleting LDP Password Option
- Configuring LDP Password Required
- Deleting LDP Password Required
- Configuring LDP Password Required for a Prefix
- Deleting LDP Password Required for a Prefix
Configuring LDP Session Backoff
- Configuring LDP Session Backoff Parameters
- Deleting LDP Session Backoff Parameters
-
- Configuring Session Protection Infinite Duration
- Deleting Session Protection Infinite Duration
- Configuring the Period to Sustain Session Protection After loss of Link Discovery
- Deleting the Period to Sustain Session Protection After loss of Link Discovery
- Configuring a Prefix List for LDP Peers of a Session Protection Config
- Deleting a Prefix List for LDP Peers of a Session Protection Config
- Configuring the Duration for a Sessoin Protection Config
- Deleting the Duration for a Sessoin Protection Config
- Configuring Infinite Session Protection Duration for Peer Routers in Prefix List
- Deleting Infinite Session Protection Duration for Peer Routers in Prefix List
Configuring MPLS LDP on an Interface
- Configuring IP over MPLS
- Deleting IP over MPLS
- Configuring LDP-IGP Synchronization on an Interface
- Deleting LDP-IGP Synchronization on an Interface
- Configuring a Delay Time for LDP IGP Synchronization on the Specified Interface
- Deleting a Delay Time for LDP IGP Synchronization on the Specified Interface
- Configuring MPLS LDP Autoconfiguration for IGP Interfaces
- Deleting MPLS LDP Autoconfiguration for IGP Interfaces
- Configuring an IP Address to use for LDP Transport Address
- Deleting an IP Address to use for LDP Transport Address
- Configuring an Interface LDP Transort Address
- Deleting an Interface LDP Transort Address
-
- Configuring MPLS Forwarding for IP Default Route
- Deleting MPLS Forwarding for IP Default Route
-
- Configuring LDP Neighbor Implicit Withdraw
- Deleting LDP Neighbor Implicit Withdraw Label
- Configuring Label Binding Exchange Controls
- Deleting Label Binding Exchange Controls
- Configuring Targeted Session
- Deleting Targeted Session
-
- Configuring an LDP Router-Id (Ethernet)
- Deleting an LDP Router-Id (Ethernet)
- Configuring an LDP Router-Id (Port Channel)
- Deleting an LDP Router-Id (Port Channel)
- Configuring an LDP Router-Id (Loopback)
- Deleting an LDP Router-Id (Loopback)
- Configuring Forced Change of the LDP Router Id
- Deleting Forced Change of the LDP Router Id
-
- Configuring the Default Group
- Deleting the Default Group
- Configuring the Source Interface Used inthe Backbone Network
- Deleting the Source Interface Used inthe Backbone Network
- Configuring (*,G)-only State
- Deleting (*,G)-only State
- Configuring Dependence on BGP-MDT SAFI for Auto-Discovery
- Deleting Dependence on BGP-MDT SAFI for Auto-Discovery
- Configuring a PIM Hello-Interval
- Deleting a PIM Hello-Interval
- Configuring a PIM JP-Interval
- Deleting a PIM JP-Interval
- Configuring a Policy for Creating Data MDTs (with a Route Map)
- Configuring a Policy for Creating Data MDT
- Deleting a Policy for Creating Data MDT
-
- Install Activate Patch (Example 1 of 2)
- Install Activate Patch (Example 2 of 2)
- Install Add Activate Bootflash Patch
- Install Add Activate FTP Patch
- Install Add Activate TFTP Patch
- Install Add Bootflash Patch
- Install Add FTP Patch
- Install Add TFTP Patch
- Install Commit Patch (Example 1 of 2)
- Install Commit Patch (Example 2 of 2)
- Install Deactivate Patch (Example 1 of 2)
- Install Deactivate Patch (Example 2 of 2)
- Install Remove Patch (Example 1 of 2)
- Install Remove Patch (Example 2 of 2)
-
- Install All NX-OS Bootflash Abort
- Install All NX-OS Bootflash Disruptive
- Install All NX-OS Bootflash Disruptive Bios-Force
- Install All NX-OS Bootflash Non-Disruptive
- Install All NX-OS Bootflash Non-Disruptive Bios-Force
- Install All NX-OS Bootflash Package Disruptive
- Install All NX-OS Bootflash Package Non-Disruptive
- Install All NX-OS FTP Disruptive
- Install All NX-OS FTP Disruptive-Override
- Install All NX-OS FTP Non-Disruptive
- Install All NX-OS FTP Non-Disruptive Override
- Install All NX-OS SCP Non-Disruptive
- Install All NX-OS SCP Disruptive
- Install All NX-OS TFTP Disruptive
- Install All NX-OS TFTP Non-Disruptive
- Show Install All Impact NX-OS Bootflash Disruptive
- Show Install All Impact NX-OS Bootflash Nondisruptive
- Show Install All Impact NX-OS FTP Disruptive
- Show Install All Impact NX-OS FTP Non-Disruptive
- Show Install All Impact NX-OS SCP Disruptive
- Show Install All Impact NX-OS SCP Non-Disruptive
- Show Install All Impact NX-OS TFTP Disruptive
- Show Install All Impact NX-OS TFTP Non-Disruptive
Configuring Global MLD Snooping
- Configuring MLD Snooping
- Deleting MLD Snooping
- Configuring IPv6 MLD Snooping System Management
- Disabling IPv6 MLD Snooping System Management
- Configuring General Query Miss Count
- Deleting General Query Miss Count
- Configuring MLDv1 Report Suppression for the VLAN/BD
- Deleting MLDv1 Report Suppression for the VLAN/BD
- Configuring VLAN/BD link-Local Group Suppression
- Deleting VLAN/BD link-Local Group Suppression
- Configuring Group Membership Timeout
- Deleting Group Membership Timeout
- Configuring MLD Snooping to Never Expire Ports from Group Membership
- Deleting MLD Snooping to Never Expire Ports from Group Membership
- Configuring MRT in Seconds
- Deleting MRT in Seconds
- Configuring the Initial Holddown Period After Switchover/Restart
- Deleting the Initial Holddown Period After Switchover/Restart
- Configuring the Size for VLAN/BD Events for MLD-Snoop
- Deleting the Size for VLAN/BD Events for MLD-Snoop
- Configuring the Event History Buffer Size for VLAN/BD Events
- Deleting the Event History Buffer Size for VLAN/BD Events
- Configuring Event History Buffer for MLD-Snoop Internal Events
- Deleting Event History Buffer for MLD-Snoop Internal Events
- Configuring the Event History Buffer Size for MFDM-SUM Events
- Deleting the Event History Buffer Size for MFDM-SUM Events
- Configuring the Event History Buffer Size for VPC Events
- Deleting the Event History Buffer Size for VPC Events
- Configuring the Event History Size for RIB events
- Deleting the Event History Size for RIB events
- Configuring the VPC Peer Link as Static Mrouter for all VLANs/BDs
- Deleting the VPC Peer Link as Static Mrouter for all VLANs/BDs
- Disabling NVE as a Static Router Port
- Enabling NVE as a Static Router Port
- Configuring MLD Snooping Table Syslog Threshold
- Deleting MLD Snooping Table Syslog Threshold
Configuring MLD Snooping Under a VLAN Configuration
- Configuring MLD Snooping
- Deleting MLD Snooping
- Configuring Explicit Host Tracking for VLAN/BD
- Deleting Explicit Host Tracking for VLAN/BD
- Configuring a Static Multicast Router Interface
- Deleting a Static Multicast Router Interface
- Configuring Fast Leave for MLDv1 on the VLAN/BD (MLDv2 Fast Leave is Enabled by Default)
- Deleting Fast Leave for MLDv1 on the VLAN/BD (MLDv2 Fast Leave is Enabled by Default)
- Configuring the Interval Between Group-Specific Query Transmissions
- Deleting the Interval Between Group-Specific Query Transmissions
- Configuring Snooping Querier
- Deleting Snooping Querier
- Configuring Querier Timeout for MLDv2
- Deleting Querier Timeout for MLDv2
- Configuring the Interval between Query Transmissions
- Deleting the Interval between Query Transmissions
- Configuring MRT for Query Messages
- Deleting MRT for Query Messages
- Configuring RFC Defined Robustness
- Deleting RFC Defined Robustness
- Configuring the Number of Queries Sent at Startup
- Deleting the Number of Queries Sent at Startup
- Configuring the Query Interval at Startup
- Deleting the Query Interval at Startup
- Configuring the MLD Version Number for VLAN/BD
- Deleting the MLD Version Number for VLAN/BD
Configuring Event History Buffers for PIM6
- Configuring the CLI Event History Buffer Size
- Deleting the CLI Event History Buffer Size
- Configuring the Data Register-Received Event History Buffer Size
- Deleting the Data Register-Received Event History Buffer Size
- Configuring Join Prune Event History Buffer Size
- Deleting Join Prune Event History Buffer Size
- Configuring the Txlist Event History Buffer Size
- Deleting the Txlist Event History Buffer Size
- Configuring the VPC Event History Buffer Size
- Deleting the VPC Event History Buffer Size
Configuring PIM6 in Global Configuration Mode
- Configuring Disabling ECMP Multicast Load Splitting
- Deleting Disabling ECMP Multicast Load Splitting
- Configuring a Resilient RPF Interface
- Deleting a Resilient RPF Interface
- Removing Routes when Restarting PIM6
- Deleting the Config for Removing Routes when Restarting PIM6
- Configuring Bintrace
- Deleting Bintrace
- Configuring the MFDM Buffer Route Size
- Deleting the MFDM Buffer Route Size
- Configuring the Number of Bintrace Entries
- Configuring the Number of Bintrace Records per Entry
Configuring PIM6 on an Ethernet Interface
- Configuring Sparse-Mode PIM6 on an Interface
- Deleting Sparse-Mode PIM6 on an Interface
-
- Configuring Disabling ECMP Multicast Load Splitting
- Deleting Disabling ECMP Multicast Load Splitting
- Configuring a Resilient RPF Interface
- Deleting a Resilient RPF Interface
- Removing Routes when Restarting PIM6
- Deleting the Config for Removing Routes when Restarting PIM6
Configuring Hardware Profile Settings
- Enabling Real-time Stats
- Disabling Real-time Stats
-
- Configuring a Description
- Deleting a Description
- Configuring the Flow Count Throttle for Drop Events
- Deleting the Flow Count Throttle for Drop Events
- Configuring Buffer Drops
- Deleting Buffer Drops
- Configuring ACL Drops to be Logged
- Configuring Forward Drops to be Logged
- Deleting Forward Drops to be Logged
- Configuring Blackhole
- Deleting Blackhole
- Configuring a Latency Threshold in Micro Seconds
- Deleting the Latency Threshold in Micro Seconds
- Configuring a Latency Threshold in Milli Seconds
- Deleting the Latency Threshold in Milli Seconds
- Configuring a Flow Count Throttle for Drop Events
- Deleting the Flow Count Throttle for Drop Events
-
- Configuring a Base Exporter Id to be Applied on the System
- Deleting the Base Exporter Id to be Applied on the System
- Configuring a Destination Address
- Deleting the Destination Address
- Configuring a Source Address
- Deleting the Source Address
- Configuring a Destination UDP Port
- Deleting the Destination UDP Port
-
- Configuring an FTE Event to Use
- Deleting the FTE Event
- Configuring an Exporter to Use
- Deleting the Exporter to Use
- Configuring a Flow Record to Use
- Deleting a Flow Record
- Configuring a Description
- Deleting a Description
-
- Configuring Datalink (Layer 2) Attributes
- Deleting Datalink (Layer 2) Attributes
- Configuring the Protocol for IPv4 Match
- Deleting the Protocol for IPv4 Match
- Configuring TOS for IPv4 Match
- Deleting TOS for IPv4 Match
- Configuring the Transport Source Port for IPv4 Match
- Deleting the Transport Source Port for IPv4 Match
- Configuring the Transport Destination Port for IPv4 Match
- Deleting the Transport Destination Port for IPv4 Match
- Configuring the Protocol for IPv6 Match
- Deleting the Protocol for IPv6 Match
- Configuring TOS for IPv6 Match
- Deleting TOS for IPv6 Match
- Configuring the Transport Source Port for IPv6 Match
- Deleting the Transport Source Port for IPv6 Match
- Configuring the Transport Destination Port for IPv6 Match
- Deleting the Transport Destination Port for IPv6 Match
- Configuring a Description
- Deleting a Description
- Configuring a Description
Configuring Flow Table Events (FTE)
- Configuring an FTE Event
- Deleting an FTE Event
- Configuring an FTE Events Exporter
- Deleting an FTE Events Exporter
- Configuring an FTE Monitor
- Deleting an FTE Monitor
- Configuring an FTE Record
- Deleting and FTE Record
- Configuring Events for Drops
- Deleting Events for Drops
- Configuring Events for Latency Events
- Deleting Events for Latency Events
- Configuring an FTE Monitor to be Applied
- Deleting an FTE Monitor to be Applied
Applying the Flow Monitor for VRF Filtering
- Configuring a Flow Monitor
- Deleting a Flow Monitor
Configuring a VRF Under an OSPFv3 Instance
- Enabling Graceful Restart Only for a Planned Restart
- Disabling Graceful Restart
- Configure Maximum Interval to Restart Gracefully
- Deleting Maximum Interval to Restart Gracefully
- Configuring Helper-disable
- Unconfiguring Helper-disable
- Enable name-lookup for OSPFv3
- Disable name-lookup for OSPFv3
- Suppressing Routing Updates on the Interface (Interfaces Passive by Default)
- Unsuppressing Routing Updates on the Interface(Interfaces non-passive by Default)
- Shutting Down the OSPFv3 Instance
- Unconfiguring the shutdown of OSPFv3 Protocol Instance
Configuring an IPv6 Unicast Address Family Under a VRF for an OSPFv3 Instance
- Configuring the Default Metric for Redistributed Routes
- Deleting the Default Metric for Redistributed Routes
- Configuring the Default Metric for Redistributed Routes
- Deleting the Default Metric for Redistributed Routes
- Configuring the OSPFv3 Administrative Distance
- Deleting the OSPFv3 Administrative Distance
- Configuring the OSPFv3 Administrative Distance
- Deleting the OSPFv3 Administrative Distance
Configuring a Virtual Link Under a VRF for an OSPFv3 Instance
- Configuring OSPFv3 Dead Interval
- Unconfiguring OSPFv3 Dead Interval
- Configuring OSPFv3 Hello Interval
- Unconfiguring OSPFv3 Hello Interval
- Configuring OSPFv3 Retransmit Interval
- Unconfiguring OSPFv3 Retransmit Interval
- Configuring OSPFv3 Packet Transmission Delay
- Unconfiguring OSPFv3 Packet Transmission Delay
Configuring an IPv6 Unicast Address Family Under an OSPFv3 Instance
- Configuring the Default Metric for Redistributed Routes
- Deleting the Default Metric for Redistributed Routes
- Configuring the Default Metric for Redistributed Routes
- Deleting the Default Metric for Redistributed Routes
- Configuring the OSPFv3 Administrative Distance
- Deleting the OSPFv3 Administrative Distance
Configuring OSPFv3 on a Loopback Interface
- Configuring an OSPFv3 Point-to-Point Network
- Deleting an OSPFv3 Point-to-Point Network
- Configuring Flush Routes under ospfv3
- Deleting Flush Routes Under OSPFv3
- Enabling Graceful Restart Planned Only
- Disabling Graceful Restart
- Configure Maximum Interval to Restart Gracefully
- Deleting Maximum Interval to Restart Gracefully
- Configuring Helper-Disable
- Unconfiguring Helper-Disable
- Configuring OSPFv3 Router Isolation from the OSPFv3 Perspective
- Unconfiguring OSPFv3 Router Isolation from the OSPFv3 Perspective
- Enable name-lookup for OSPFv3
- Disable name-lookup for OSPFv3
- Suppressing Routing Updates on the Interface (Interfaces Passive by Default)
- Unsuppressing Routing Updates on the Interface(Interfaces non-passive by Default)
- Shutting down ospfv3 instance
- Unconfiguring shutdown of ospfv3 protocol instance
Configuring a Virtual Link Under an OSPFv3 Instance
- Configuring OSPFv3 Dead Interval
- Unconfiguring OSPFv3 Dead Interval
- Configuring OSPFv3 Hello Interval
- Unconfiguring OSPFv3 Hello Interval
- Configuring OSPFv3 Retransmit Interval
- Unconfiguring OSPFv3 Retransmit Interval
- Configuring OSPFv3 Packet Transmission Delay
- Unconfiguring OSPFv3 Packet Transmission Delay
-
- Configuring OOBST Burst-Detect Thresholds
- Deleting OOBST Burst-Detect Thresholds
- Configuring Dynamic Buffer Sharing
- Deleting Dynamic Buffer Sharing
- Configuring Ability to Drop Multicast Packets for Lossless Queue
- Unconfiguring Ability to Drop Multicast Packets for Lossless Queue
- Configuring Class(es) To Monitor
- Deleting Class(es) To Monitor
- Configuring SPAN Pool Group Thresholds
- Deleting SPAN Pool Group Thresholds
- Configuring No-drop Pool Group Thresholds for EX Platforms
- Deleting No-drop Pool Group Thresholds for EX Platforms
- Configuring Noise Thresholds
- Deleting Noise Thresholds
- Configuring Burst-Detect
- Deleting Burst-Detect
Configuring Priority Flow Control
- Configuring Fixed Restore Multiplier
- Deleting Fixed Restore Multiplier
- Configuring the Watch Dog Interval
- Deleting the Watch Dog Interval
- Configuring the Auto-Restore Multiplier
- Deleting the Auto-Restore Multiplier
- Configuring a Shutdown Multiplier
- Deleting a Shutdown Multiplier
- Configuring global PFCWatch-dog forced-on mode
- Unconfiguring global PFCWatch-dog forced-on mode
- Enabling PFC Watch-Dog Interval Globally
- Disabling PFC Watch-Dog Interval Globally
- Configuring Internal Interface Multiplier
- Deleting Internal Interface Multiplier
Configuring the Hardware Buffer Utilization Thresholds
- Configuring the Hardware Buffer Poll-interval
- Unconfiguring the Hardware Buffer Poll-interval
- Configuring Port Egress Buffer Usage Threshold
- Deleting Port Egress Buffer Usage Threshold
Enabling Queue-Based ECN Marking
- Configuring Queue-Based ECN Marking
- Disabling Queue-Based ECN Marking
-
- Configuring an IEEE 802.1Q Class of Service for QoS Classification
- Deleting an IEEE 802.1Q Class of Service for QoS Classification
Changing the Bandwidth Allocated to Unicast and Multicast Traffic
- Configuring Unicast Bandwidth Percentage
- Deleting unicast bandwidth percentage
-
- Configuring the Committed Information Rate
- Deleting the Committed Information Rate
- Configuring the Rate as Percentage of Interface Data-Rate
- Deleting the Rate as Percentage of Interface Data-Rate
- Configuring OOBST Burst-Detect Thresholds for the Class
- Deleting OOBST Burst-Detect Thresholds for the Class
- Configuring Traffic Class Priority
- Deleting the Traffic Class Priority
- Configuring the Queue Size for the Class
- Deleting the Queue Size for the Class
- Configuring the Queue Desired for AFD
- Deleting the Queue Desired for AFD
- Configuring a QoS Group Match
- Deleting a QoS Group Match
- Configuring the Pause and Resume Threshold Buffer Limits in Bytes
- Deleting the Pause and Resume Threshold Buffer Limits in Bytes
- Configuring an Ingress Priority-Group to which the Traffic is Mapped and Pause Limits are Applied
- Deleting an Ingress Priority-Group to which the Traffic is Mapped and Pause Limits are Applied
Configuring a User-Defined Network QoS Policy
- Configuring Dynamic Packet Prioritization
- Deleting Dynamic Packet Prioritization
- Configuring MTU for the CoS
- Unconfiguring MTU for the CoS
- Configuring an IEEE 802.1Q class of Service for a Network QoS Policy
- Deleting an IEEE 802.1Q class of Service for a Network QoS Policy
- Configuring a Congestion Notification
- Deleting a Congestion Notification
- Configuring Global Congestion Control Thresholds
- Unconfiguring Global Congestion Control Thresholds
- Configuring Non-ECN-Capable-Traffic Forwarding Without WRED Drops
- Deleting Non-ECN-Capable-Traffic Forwarding Without WRED Drops
- Configuring Pause Characteristics (CBFC)
- Deleting Pause Characteristics (CBFC)
-
- Configuring a Default Template As Reference
- Configuring TCP NAT Region Within NAT Region
- Deleting TCP NAT Region Within NAT Region
- Configuring NFE2 TCAM Carving Parameters
Configuring User Roles and Rules
- Enabling IOS Type Privilege Level Support
- Disabling IOS Type Privilege Level Support
- Configuring a Feature-Group Name
- Deleting a Feature-Group Name
- Configuring the Range of VLANs Accessible to the Role
- Deleting the Range of VLANs Accessible to the Role
- Configuring a Feature Name
- Deleting a Feature Name
-
- Configuring the Max Number of Failed Attempts
- Deleting the Max Number of Failed Attempts
- Configuring Authorization and Accounting Bypass
- Deleting Authorization and Accounting Bypass
- Configuring Invalid Username Log
- Deleting Invalid Username Log
- Configuring Syslogs for Failed Logins
- Deleting Syslogs for Failed Logins
- Configuring Syslogs for Successful Logins
- Deleting Syslogs for Successful Logins
Configuring Secure Login Features
- Configuring Quiet-Mode Active Time Period
- Deleting Quiet-Mode Active Time Period
- Configuring Access-Class Quiet-Mode
- Deleting Access-Class Quiet-Mode
- Deleting Quiet-Mode Active Time Period
- Deleting Quiet-Mode Options
Configuring IPv4 and IPv6 ACLs
- Matching Inner Header Fields In IPinIP/GRE Packets
- Unmatching Inner Header Fields In IPinIP/GRE Packets
-
- Configuring the Max Number of Log Entries Cached in Software
- Deleting the Max Number of Log Entries Cahed in Software
- Configuring Source Group Tag Info in Syslogs
- Deleting Source Group Tag Info in Syslogs
- Configuring Detailed ACL Information
- Deleting Detailed ACL Information
-
- Configuring the Periodic Time and Date
- Deleting the Periodic Time and Date
- Configuring the Absolute Time and Date
- Deleting the Absolute Time and Date
- Configuring the Periodic Time and Date for an Access List
- Deleting the Periodic Time and Date for an Access List
- Configuring the Absolute Time and Date for an Access List
- Deleting the Absolute Time and Date for an Access List
-
- Configuring DHCPv6 - Option 79
- Deleting DHCPv6 - Option 79
-
- Configuring DHCP Option82 Suboption Circuit Id String (on a Port-Channel Interface)
- Configuring an IP DHCP Snooping Suboption
- Deleting an IP DHCP Snooping Suboption
Configuring Port Security (Ethernet Interface)
- Configuring the Absolute Timer
- Deleting the Absolute Timer
- Configuring Port-Security Aging Time
- Deleting Port-Security Aging Time
- Configuring the Maximum Secure Addresses
- Deleting the Maximum Secure Addresses
- Configuring the Maximum Secure Addresses for a VLAN
- Deleting the Maximum Secure Addresses for a VLAN
- Configuring a Sticky MAC Address
- Deleting a Sticky MAC Address
- Configuring a MAC Address
- Deleting a MAC Address
- Configuring a VLAN on which the MAC Address Should be Secured
- Deleting a VLAN on which the MAC Address Should be Secured
- Configuring Security Violation Protect Mode
- Deleting Security Violation Protect Mode
- Configuring Security Violation Restrict Mode
- Deleting Security Violation Restrict Mode
- Configuring Security Violation Shutdown Mode
- Deleting Security Violation Shutdown Mode
- Enabling Port Security
- Disabling Port Security
Configuring Port Security (Port-Channel Interface)
- Configuring the Absolute Timer
- Deleting the Absolute Timer
- Configuring Port-Security Aging Time
- Deleting Port-Security Aging Time
- Configuring the Maximum Secure Addresses
- Deleting the Maximum Secure Addresses
- Configuring the Maximum Secure Addresses for a VLAN
- Deleting the Maximum Secure Addresses for a VLAN
- Configuring a Sticky MAC Address
- Deleting a Sticky MAC Address
- Configuring a MAC Address
- Deleting a MAC Address
- Configuring a VLAN on which the MAC Address Should be Secured
- Deleting a VLAN on which the MAC Address Should be Secured
- Configuring Security Violation Protect Mode
- Deleting Security Violation Protect Mode
- Configuring Security Violation Restrict Mode
- Deleting Security Violation Restrict Mode
- Configuring Security Violation Shutdown Mode
- Deleting Security Violation Shutdown Mode
- Enabling Port Security
- Disabling Port Security
Configuring a Local Server Profile for RFC 5176 Support
- Configuring the Port on which the Local RADIUS Server Listens
- Deleting the Port on which the Local RADIUS Server Listens
- Configuring the Encryption Key Shared with the RADIUS Clients
- Deleting the Encryption Key Shared with the RADIUS Clients
- Configuring the Encryption Key Shared with the RADIUS Client (Encrypted)
- Configuring the Encryption Key Shared with the RADIUS Client (Clear Text)
-
- Configuring a Macsec Policy
- Deleting a Macsec Policy
- Configuring a Shutdown
- Unconfiguring a Shutdown
- Configuring an Ether Type (Broadcast Address)
- Deleting an Ether Type (Broadcast Address)
- Configuring an Ether Type (MAC Address)
- Deleting an Ether Type (MAC Address)
- Configuring a Fallback Keychain
- Unconfiguring a Fallback Keychain
- Configuring a Cipher Suite
- Deleting a Cipher Suite
- Configuring Confidentiality Offset Options
- Deleting Confidentiality Offset Options
- Including ICV Indicator paramset in MKPDU
- Excluding ICV Indicator paramset in MKPDU
- Configuring Key-Server priority
- Deleting Key-Server priority
- Configuring Time in Seconds to Force SAK Rekey
- Deleting Time in Seconds to Force SAK Rekey
- Configuring a Should-Secure Policy
- Configuring a Must-Secure Policy
- Deleting a Must-Secure Policy
- Configuring the Window Size
- Unconfiguring the Window Size
- Unconfiguring the fallback keychain
Configuring Password Encryption
- Configuring Encryption Using AES Encryption Standard
- Deleting Encryption Using AES Encryption Standard
Configuring the Shell Type for Login
- Specifying Bash Shell for Particular User Login
- Specifying VSH Shell for Login
-
- Enabling Weak Ciphers
- Disabling Weak Ciphers
- Configuring the Maximum Login Attempts From SSH
- Deleting the Maximum Login Attempts From SSH
- Configuring Login Gracetime for SSH Connection
- Deleting Login Gracetime for SSH Connection
- Generating Keypair with ECDSA
- Generating Keypair with RSA
- Generating Keypair with DSA
- Enabling SFTP Server
- Disabling SFTP Server
-
- Configuring the Maximum Login Attempts for Telnet
- Deleting the Maximum Login Attempts for Telnet
-
- Configuring a Cisco-Specific SNMP BGP Trap for State Changes
- Deleting a Cisco-Specific SNMP BGP Trap for State Changes
- Enabling SNMP CBGP2 Traps
- Disabling SNMP CBGP2 Traps
- Configuring a CISCO-Specific SNMP CBGP2 Trap for All FSM State Changes
- Deleting a CISCO-Specific SNMP CBGP2 Trap for All FSM State Changes
- Enabling SNMP CBGP2 Traps
- Disabling SNMP CBGP2 Traps
- Configuring a CISCO-Specific SNMP BGP Trap for All FSM State Changes
- Deleting a CISCO-Specific SNMP BGP Trap for All FSM State Changes
- Enabling SNMP BGP Traps
- Disabling SNMP BGP Traps
- Configuring a Cisco-Specific BGP Trap for Backward Transition
- Deleting a Cisco-Specific BGP Trap for Backward Transition
- Configuring a Cisco-Specific CBGP2 Trap for Backward Transition
- Deleting a Cisco-Specific CBGP2 Trap for Backward Transition
- Configuring a Cisco-Specific CBGP2 Trap for Prefix Threshold Events
- Deleting a Cisco-Specific CBGP2 Trap for Prefix Threshold Events
- Configuring a Cisco-Specific BGP Trap for State-Changes Limited
- Deleting a Cisco-Specific BGP Trap for State-Changes Limited
- Configuring a Cisco-Specific CBGP2 Trap for State-Changes Limited
- Deleting a Cisco-Specific CBGP2 Trap for State-Changes Limited
- Configuring Cisco-Specific BGP Trap for Prefix Threshold Events
- Deleting Cisco-Specific BGP Trap for Prefix Threshold Events
-
- Configuring an ERSPAN Source
- Deleting an ERSPAN Source
- Configuring Global Origin IP Address in Default VDC Across all VDCs
- Configuring a Remote IP Address
- Deleting a Remote IP Address
- Configuring IP DSCP
- Deleting IP DSCP
- Configuring the IP Time-to-Live Value
- Deleting the IP Time-to-Live Value
- Configuring the Source Interface
- Configuring the Source Interface (Ingress and Egress)
- Configuring a Drop SPAN Session as Low Priority
- Deleting a Drop SPAN Session as Low Priority
- Configuring a VRF Membership
- Deleting a VRF Membership
- Configuring the ERSPAN Id
- Deleting the ERSPAN Id
- Configuring the MTU size for SPAN Packets
- Deleting the MTU size for SPAN Packets
-
- Configuring a Source Interface
- Configuring a Source Interface (Ingress and Egress)
- Configuring a Drop SPAN Session as Low Priority
- Deleting a Drop SPAN Session as Low Priority
- Shutting a Monitor Session
- Unconfiguring a Monitor Session Shut
- Configuring the Source Interface
- Configuring a Source Interface (Egress)
- Configuring a Drop SPAN Session as Low Priority
- Deleting a Drop SPAN Session as Low Priority
-
- Configuring the Syslog Message Level for All Facilities
- Deleting the Syslog Message Level for All Facilities
- Configuring the ASCII-CFG Syslog Message Level
- Deleting the ASCII-CFG Syslog Message Level
- Configuring the BFD Syslog Message Level
- Deleting the BFD Syslog Message Level
- Configuring the Bootvar Syslog Message Level
- Unconfiguring the Bootvar Syslog Message Level
- Configuring the Callhome Syslog Message Level
- Deleting the Callhome Syslog Message Level
- Configuring the CLIs Syslog Message Level
- Deleting the CLIs Syslog Message Level
- Configuring the CTS Syslog Message Level
- Deleting the CTS Syslog Message Level
- Configuring the Diagnostic Port Loopback Test Syslog Message Level
- Deleting the Diagnostic Port Loopback Test Syslog Message Level
- Configuring the Delta Statistics Syslog Message Level
- Deleting the Delta Statistics Syslog Message Level
- Configuring ELTM Syslog Message Level
- Deleting ELTM Syslog Message Level
- Configuring the Ethernet SPAN Syslog Message Level
- Deleting the Ethernet SPAN Syslog Message Level
- Configuring the EVMC Syslog Message Level
- Deleting the EVMC Syslog Message Level
- Configuring the Fabric Forwarding Syslog Message Level
- Deleting the Fabric Forwarding Syslog Message Level
- Configuring the Feature Manager Syslog Message Level
- Deleting the Feature Manager Syslog Message Level
- Configuring the GPIXM Syslog Message Level
- Deleting the GPIXM Syslog Message Level
- Configuring the HSRP Syslog Message Level
- Deleting the HSRP Syslog Message Level
- Configuring the ICAM Syslog Message Level
- Deleting the ICAM Syslog Message Level
- Configuring the IM Syslog Message Level
- Deleting the IM Syslog Message Level
- Configuring the Interface VLAN Syslog Message Level
- Deleting the Interface VLAN Syslog Message Level
- Configuring the IPQOSMGR Syslog Message Level
- Unconfiguring the IPQOSMGR Syslog Message Level
- Configuring IP SLA Sender Syslog Message Level
- Deleting IP SLA Sender Syslog Message Level
- Configuring the IP SLA Twamp-Server Syslog Message Level
- Deleting the IP SLA Twamp-Server Syslog Message Level
- Configuring the ISCM Syslog Message Level
- Deleting the ISCM Syslog Message Level
- Configuring the L3VM Syslog Message Level
- Deleting the L3VM Syslog Message Level
- Configuring the LACP Syslog Message Level
- Deleting the LACP Syslog Message Level
- Configuring the LIM Syslog Message Level
- Deleting the LIM Syslog Message Level
- Configuring the MFDM Syslog Message level
- Deleting the MFDM Syslog Message level
- Configuring MVSH Syslog Message Level
- Deleting MVSH Syslog Message Level
- Configuring NXOS SDK Syslog Message Level
- Deleting NXOS SDK Syslog Message Level
- Configuring the OpenFlow Syslog Message Level
- Configuring OSPF Syslog Message Level
- Deleting OSPF Syslog Message Level
- Configuring OSPFv3 Syslog Message Level
- Deleting OSPFv3 Syslog Message Level
- Configuring the PFSTAT Syslog Message Level
- Deleting the PFSTAT Syslog Message Level
- Configuring the PIXM Syslog Message Level
- Deleting the PIXM Syslog Message Level
- Configuring the PLTFM Config Syslog Message Level
- Deleting the PLTFM Config Syslog Message Level
- Configuring the RES_MGR Syslog Message Level
- Deleting the RES_MGR Syslog Message Level
- Configuring the RPM Syslog Message Level
- Deleting the RPM Syslog Message Level
- Configuring the SKSD Syslog Message Level
- Deleting the SKSD Syslog Message Level
- Configuring the Track Syslog Message Level
- Deleting a Track Syslog Message Level
- Configuring the Tunnel Syslog Message Level
- Deleting the Tunnel Syslog Message Level
- Configuring the UFDM Syslog Message Level
- Deleting the UFDM Syslog Message Level
- Configuring the VMM Syslog Message Level
- Deleting the VMM Syslog Message Level
- Configuring the VRRP-CFG Syslog Message Level
- Deleting the VRRP-CFG Syslog Message Level
- Configuring the VRRPv3 Syslog Message Level
- Deleting the VRRPv3 Syslog Message Level
- Configuring the XML Agent Server Syslog Message Level
- Deleting the XML Agent Server Syslog Message Level
- Configuring the XML Master Agent Syslog Message Level
- Deleting the XML Master Agent Syslog Message Level
- Configuring the Rate Limit for Log Messages
- Disabling the Rate Limit for Log Messages
- Configuring DNS Refresh Interval for Remote Syslog Server Hostnames
- Disabling DNS Refresh Interval for Remote Syslog Server Hostnames
- Configuring the Hostname as Origin-Id of Logging Messages
- Deleting the Hostname as Origin-Id of Logging Messages
- Configuring the IP Address as Origin-Id of Logging Messages
- Deleting a Text String as Origin Id of Logging Messages
- Configuring a Text String as Origin Id of Logging Messages
-
- Configuring Regions to Limit the Distribution Scope of Application(s)
- Deleting Regions to Limit the Distribution Scope of Application(s)
- Configuring the Registered Name of the Local Application
- Deleting the Registered Name of the Local Application
Configuring a Fan-Direction Mismatch
- Configuring Fan-Direction Mismatch in Check
- Deleting Fan-Direction Mismatch in Check
-
- Enabling PTP
- Disabling PTP
Configuring NX-OS Container Tracker
- Configuring NXOS Container Tracker
- Deleting NXOS Container Tracker
- Configuring a Kubertnetes Server
- Deleting a Kubertnetes Server Configuration
- Configuring a Service to Watch
- Deleting a Service to Watch
Configuring Embedded Event Manager
- Configuring an Event Manager Policy Applet
- Deleting an Event Manager Policy Applet
- Configuring a Counter Event (Tagged)
- Deleting a Counter Event (Tagged)
- Configuring a Counter Event (Untagged)
- Deleting a Counter Event (Untagged)
- Configuring the Time Interval for a System-Policy Event
- Deleting the Time Interval for a System-Policy Event
- Configuring Shutdown of the Specified LCs Due to Power Over Budget
- Deleting Shutdown of the Specified LCs Due to Power Over Budget
- Configuring Reload for the System or a Specific Module
- Deleting Reload for the System or a Specific Module
- Configuring the Default Action for an Event
- Deleting the Default Action for an Event
- Configuring the Default Action of the Policy Being Overridden
- Deleting the Default Action of the Policy Being Overridden
- Configuring the Send out of an SNMP Trap
- Deleting the Send out of an SNMP Trap
- Deleting an Action
- Configuring Route Extra in FIB for an Adjacency Related Event
- Deleting Route Extra in FIB for an Adjacency Related Event
- Specifying a TCAM Usage Related Event
- Deleting a TCAM Usage Related Event
- Configuring Route Extra in FIB
- Deleting Route Extra in FIB
- Configuring an Inconsistent Route in FIB
- Deleting an Inconsistent Route in FIB
- Configuring a Missing Route in FIB
- Deleting a Missing Route in FIB
- Configuring Online or Offline Status (Tagged)
- Deleting Online or Offline Status (Tagged)
- Configuring Online or Offline Status (Untagged)
- Deleting Online or Offline Status (Untagged)
- Configuring Offline Status (Tagged)
- Deleting Offline Status (Tagged)
- Configuring Offline Status (Untagged)
- Deleting Offline Status (Untagged)
- Configuring the Offline Status for All Modules (Tagged)
- Deleting the Offline Status for All Modules (Tagged)
- Configuring the Offline Status for All Modules (Untagged)
- Deleting the Offline Status for All Modules (Untagged)
- Configuring Online Status (Tagged)
- Deleting Online Status (Tagged)
- Configuring Online Status (Untagged)
- Deleting Online Status (Tagged)
- Configuring the Registration Failure After Hitless Upgrade (Tagged)
- Deleting the Registration Failure After Hitless Upgrade (Tagged)
- Configuring the Registration Failure After Hitless Upgrade (Untagged)
- Deleting the Registration Failure After Hitless Upgrade (Untagged)
- Configuring the Registration Failure After Hitless Upgrade for All Modules (Tagged)
- Deleting the Registration Failure After Hitless Upgrade for All Modules (Tagged)
- Configuring the Registration Failure After Hitless Upgrade for All Modules (Untagged)
- Deleting the Registration Failure After Hitless Upgrade for All Modules (Untagged)
- Configuring Any OIR (Fan; Tagged)
- Deleting Any OIR (Fan; Tagged)
- Configuring Any OIR (Fan; Untagged)
- Deleting Any OIR (Fan; Untagged)
- Configuring OIR Insert (Fan; Tagged)
- Deleting OIR Insert (Fan; Tagged)
- Configuring OIR Insert (Fan; Untagged)
- Deleting OIR Insert (Fan; Untagged)
- Configuring OIR Remove (Fan; Tagged)
- Deleting OIR Remove (Fan; Tagged)
- Configuring OIR Remove (Fan; Untagged)
- Deleting OIR Remove (Fan; Untagged)
- Configuring Any OIR (Module; Tagged)
- Deleting Any OIR (Module; Tagged)
- Configuring Any OIR (Module; Untagged)
- Deleting Any OIR (Module; Untagged)
- Configuring OIR Insert (Module; Tagged)
- Deleting OIR Insert (Module; Tagged)
- Configuring OIR Insert (Module; Untagged)
- Deleting OIR Insert (Module; Untagged)
- Configuring OIR Remove (Module; Tagged)
- Deleting OIR Remove (Module; Tagged)
- Configuring OIR Remove (Module; Untagged)
- Deleting OIR Remove (Module; Untagged)
- Configuring Any OIR (Powersupply; Tagged)
- Deleting Any OIR (Powersupply; Tagged)
- Configuring Any OIR (Powersupply; Untagged)
- Deleting Any OIR (Powersupply; Untagged)
- Configuring OIR Insert (Powersupply; Tagged)
- Deleting OIR Insert (Powersupply; Tagged)
- Configuring OIR Insert (Powersupply; Untagged)
- Deleting OIR Insert (Powersupply; Untagged)
- Configuring OIR Remove (Powersupply; Tagged)
- Deleting OIR Remove (Powersupply; Tagged) `
- Configuring OIR Remove (Powersupply; Untagged)
- Deleting OIR Remove (Powersupply; Untagged) `
- Configuring a Storm Control Event Specification
- Deleting a Storm Control Event Specification
- Configuring the State of the Tracking Object as Any (Tagged)
- Deleting the State of the Tracking Object Configured as Any (Tagged)
- Configuring the State of the Tracking Object as Any (Untagged)
- Deleting the State of the Tracking Object Configured as Any (Untagged)
- Configuring the State of the Tracking Object as Down (Tagged)
- Deleting the State of the Tracking Object Configured as Down (Tagged)
- Configuring the State of the Tracking Object as Down (Untagged)
- Deleting the State of the Tracking Object Configured as Down (Untagged)
- Configuring the State of the Tracking Object as Up (Tagged)
- Deleting the State of the Tracking Object as Up (Tagged)
- Configuring the State of the Tracking Object as Up (Tagged)
- Deleting the State of the Tracking Object as Up (Untagged)
- Configuring the Fanabsent Event Timer
- Deleting the Fanabsent Event Timer
- Configuring the Fanbad Event Time
- Deleting the Fanbad Event Time
- Configuring a Poweroverbudget Event
- Deleting a Poweroverbudget Event
- Configuring the Number of Occurrences before Raising the Event
- Deleting the Number of Occurrences before Raising the Event
- Configuring a Counter
- Deleting a Counter
- Configuring a VSH CLI Action
- Deleting a VSH CLI Action
- Configuring a Cron Entry String
- Deleting a Cron Entry String
- Configuring an Event Tag Id
- Deleting an Event Tag Id
- Configuring a CLI Event Specification
- Deleting a CLI Event Specification
- Configuring an SNMP Event Specification
- Deleting an SNMP Event Specification
- Configuring an SNMP Event Specification
- Deleting an SNMP Event Specification
- Configuring a Syslog Event Specification
- Deleting a Syslog Event Specification
- Configuring a New CDP Cache Entry Addition (Tagged)
- Deleting a New CDP Cache Entry Addition (Tagged)
- Configuring a New CDP Cache Entry Addition (Untagged)
- Deleting a New CDP Cache Entry Addition (Untagged)
- Configuring CDP Cache Entry Addition, Deletion, or Update (Tagged)
- Deleting CDP Cache Entry Addition, Deletion, or Update (Tagged)
- Configuring CDP Cache Entry Addition, Deletion, or Update (Untagged)
- Deleting CDP Cache Entry Addition, Deletion, or Update (Untagged)
- Deleting Existing CDP Cache Entry (Tagged)
- Unconfiguring the Existing CDP Cache Entry Deletion (Tagged)
- Deleting Existing CDP Cache Entry (Untagged)
- Unconfiguring the Existing CDP Cache Entry Deletion (Untagged)
- Configuring a CDP Cache Entry Update (Tagged)
- Deleting a CDP Cache Entry Update (Tagged)
- Configuring a CDP Cache Entry Update (Untagged)
- Deleting a CDP Cache Entry Update (Untagged)
- Configuring Debugging Collection Using a YAML File
- Deleting Debugging Collection Using a YAML File
- Configuring the Timer Period for which Older Files are Purged
- Deleting the Timer Period for which Older Files are Purged
- Disabling the Trigger-Based Collection
- Unconfiguring the Disabled Trigger-Based Collection
- Configuring Debugging Collection Using a YAML File and the Timer Period for which Older Files are Purged
- Configuring Debugging Collection Using a YAML File and the Timer Period for which Older Files are Purged
Configuring Online Diagnostics
- Configuring a Diagnostic Monitoring Test
- Unconfiguring a Diagnostic Monitoring Test
- Configuring the Skip All Bootup Test
- Unconfiguring the Skip All Bootup Test
- Configuring the Complete Diagnostic Level
- Unconfiguring the Complete Diagnostic Level
- Configuring the Minimal Diagnostic Level
- Unconfiguring the Minimal Diagnostic Level
- Configuring a Diagnostic Test
- Unconfiguring an USB Diagnostic Test
- Configuring the Hour, Minute, and Seconds for a Diagnostic Test
- Unconfiguring the Hour, Minute, and Seconds for an NVRAM Diagnostic Test
Configuring a Collector for a Hardware-Telemetry Buffer Drop
- Configuring a Description
- Deleting a Description
- Configuring the Collector Destination
- Deleting the Collector Destination
Configuring a Monitor for a Hardware-Telemetry Buffer Drop
- Configuring a Collector
- Deleting a Collector
- Configuring a Filter IP Access List
- Deleting a Filter IP Access List
- Configuring a Filter IPv6 Access List
- Deleting a Filter IPv6 Access List
- Configuring a Queue
- Deleting a Queue
- Configuring Microburst Mode for a Buffer Drop
- Deleting Microburst Mode for a Buffer Drop
- Configuring a Sampling Rate for a Buffer Drop
- Deleting a Sampling Rate for a Buffer Drop
- Configuring a Description
- Deleting a Description
Configuring a Hardware-Telemetry Buffer Drop
- Enabling Buffer Drop
- Disabling Buffer Drop
- Configuring a Collector
- Deleting a Collector
- Configuring a Buffer-Drop Monitor
- Deleting a Buffer-Drop Monitor
Configuring a Collector for Hardware-Telemetry Buffer Latency
- Configuring a Description
- Deleting a Description
- Configuring the Collector Destination
- Deleting the Collector Destination
- Configuring a Collector
- Deleting a Collector
Configuring a Monitor for Hardware-Telemetry Buffer Latency
- Configuring a Filter IP Access List
- Deleting a Filter IP Access List
- Configuring a Filter IPv6 Access List
- Deleting a Filter IPv6 Access List
- Configuring a Record
- Deleting a Record
- Configuring Microburst Mode
- Deleting Microburst Mode
- Configuring a Sampling Rate
- Deleting a Sampling Rate
- Configuring a Description
- Deleting a Description
Configuring a Record for Hardware-Telemetry Buffer Latency
- Configuring a Queue Latency Threshold
- Deleting a Queue Latency Threshold
- Configuring a Description
- Deleting a Description
Configuring Hardware-Telemetry Buffer Latency
- Enabling Buffer Latency
- Disabling Buffer Latency
- Configuring a Buffer Latency System Monitor
- Deleting a Buffer Latency System Monitor
- Configuring a Buffer Latency Collector
- Deleting a Buffer Latency Collector
- Configuring a Buffer Latency Monitor
- Deleting a Buffer Latency Monitor
- Configuring a Buffer Latency Record
- Deleting a Buffer Latency Record
- Configuring a Buffer Latency Threshold
- Deleting a Buffer Latency Threshold
-
- Configuring Unchanged Address During Redistribution (for BGP Session Only)
- Deleting Unchanged Address During Redistribution (for BGP Session Only)
-
- Configuring an IPv6 Prefix List with a Prefix Length Start Range
- Deleting an IPv6 Prefix List with a Prefix Length Start Range
- Configuring an IPv6 Prefix List
- Deleting an IPv6 Prefix List
-
- Configuring the Sequence to Insert From a Route-Map Entry
- Deleting the Sequence to Insert From a Route-Map Entry
- Configuring Match First Hop Interface of Route
- Deleting Match First Hop Interface of Route
- Configuring Match Address of Route or Match packet
- Deleting Match Address of Route or Match packet
- Configuring Match Entries of Mac Lists
- Deleting Match Entries of Mac Lists
- Configuring Unchanged Address During Redistribution (for BGP Session Only)
- Deleting Unchanged Address During Redistribution (for BGP Session Only)
- Configuring Unchanged Address During Redistribution (for BGP Session Only)
- Deleting Unchanged Address During Redistribution (for BGP Session Only)
- Configuring Prepend to the AS-Path
- Deleting Prepend to the AS-Path
- Configuring Prepend Last AS to the AS-Path
- Deleting Prepend Last AS to the AS-Path
- Configuring the Tag as an AS-Path Attribute
- Deleting the Tag as an AS-Path Attribute
-
- Configuring to Deny
- Configuring to Permit
Configuring the Delay Period for FHRP Client Initialization
- Configuring Minimum Delay
- Deleting Minimum Delay
- Configuring Reload Delay
- Deleting Reload Delay
-
- Configuring Address Match in Advertisement Packets
- Deleting Address Match in Advertisement Packets
- Configuring VRRPv2 Compatibility Mode
- Deleting VRRPv2 Compatibility Mode
- Configuring the Group Leader Name (VRRS Tag)
- Deleting the Group Leader Name (VRRS Tag)
-
- Configuring an IP Address
- Deleting an IP Address
- Configuring an IP Address
- Deleting an IP Address
- Configuring a Group Description
- Configuring a Mac Address
- Deleting a Mac Address
- Configuring Pathway Shutdown
- Configuring Pathway Shutdown
- Deleting Pathway Shutdown
- Configuring Pathway Will Inherit vMAC
- Configuring the Interval Between vMAC Unsolicited Advertisements
- Deleting the Interval Between vMAC Unsolicited Advertisements
-
- Configuring Address Match in Advertisement Packets
- Deleting Address Match in Advertisement Packets
- Configuring VRRPv2 Compatibility Mode
- Deleting VRRPv2 Compatibility Mode
- Configuring the Group Leader Name (VRRS Tag)
- Deleting the Group Leader Name (VRRS Tag)
Configuring Load Sharing in the Unicast FIB
- Configuring the TTL Value to be Used in Hash for Source Port
- Unconfiguring the TTL Value to be Used in Hash for Source Port
- Configuring the UDF Value to be Used in Hash for Source Port
- Unconfiguring the UDF Value to be Used in Hash for Source Port
-
- Configuring Round-Robin Hashing of Underlay-Paths for VXLAN Ingress-Replication Peers
- Unconfiguring Round-Robin Hashing of Underlay-Paths for VXLAN Ingress-Replication Peers
-
- Configuring Fabric Forwarding Protocol
- Deleting Fabric Forwarding Protocol
-
- Configuring ICAM
- Deleting ICAM
-
- Enabling OpenFlow
- Disabling OpenFlow
- Configuring OpenFlow
- Disabling OpenFlow
- Choosing a Forwarding Profile
- Deleting a Forwarding Profile
- Configuring an OpenFlow Controller
- Enabling Logging for Flow-Modify
- Disabling Logging for Flow-Modify
- Adding an Interface to an OpenFlow Switch
- Removing an Interface to an OpenFlow Switch
- Configuring an OpenFlow Switch Shutdown
- Unconfiguring an OpenFlow Switch Shutdown
- Configuring a Datapath Id
- Unconfiguring a Datapath Id
- Configuring Forward to Normal Dataplane
- Unconfiguring Forward to Normal Dataplane
- Configuring Max-Backoff Timer
- Unconfiguring Max-Backoff Timer
- Configuring OpenFlow Controller Probe Interval Timer
- Unconfiguring OpenFlow Controller Probe Interval Timer
- Configuring OpenFlow Protocol Version
- Unonfiguring OpenFlow Protocol Version
- Configuring the Source Address for Connection to Controllers
- Unconfiguring the Source Address for Connection to Controllers
- Configuring Statistics-Related Commands
- Unconfiguring Statistics-Related Commands
- Configuring Burst Rate-limit
- Configuring a Rate-Limit
Configuring RTP Flow Monitoring
- Configuring RTP Flows for Packet Loss Monitoring (IPv4)
- Deleting RTP Flows for Packet Loss Monitoring (IPv4)
- Configuring RTP Flows for Packet Loss Monitoring (IPv6)
- Deleting RTP Flows for Packet Loss Monitoring (IPv6)
- Configuring RTP Flow Error Monitoring Duration
Querying NetFlow RTP Information
- Querying for Detailed NetFlow RTP Information (IPv4 and IPv6)
- Querying for Detailed NetFlow RTP Information (IPv4 Only)
- Querying for RTP Flows with Active Losses
- Querying RTP Flows with Loss History (IPv6 Only)
Configuring Virtual Machine Tracker
- Configuring Shut of All LAN VLANs on an Interface
- Deleting Shut of All LAN VLANs on an Interface
- Configuring a Host to Connect
- Deleting a Host to Connect
- Configuring VM Tracker Fabric Autoconfiguration
- Deleting VM Tracker Fabric Autoconfiguration
- Configuring VM Tracker on an Interface
- Deleting VM Tracker on an Interface
- Configuring Auto Creation of VLANs
- Deleting Auto Creation of VLANs
- Configuring a Host to Connect
- Deleting a Host to Connect
- Configuring Interval for the New Host Searching Timer
- Deleting Interval for the New Host Searching Timer
- Configuring Interval for Syncing Complete Info From Host
- Deleting Interval for Syncing Complete Info From Host
- Configuring a Username
- Deleting a Username
- Configuring a Username
- Deleting a Username
- Configuring List of Allowed VLANs Used for Interface Configuration
- Configuring an IP Address
- Deleting an IP Address
Querying Configurations (Show Commands)
- Querying NAT ITD
Release 9.3(4)
When Configuring Flow Table Events (FTE), you must now enable feature analytics.
Release 9.3(5)
-
- Enabling EPBR
- Disabling EPBR
- Configuring an EPBR Policy
- Deleting an EPBR Policy
- Configuring an EPBR Service Name
- Deleting an EPBR Service Name
- Configuring an EPBR Policy Logging Level
- Deleting an EPBR Policy Logging Level
- Configuring EPBR Policy Refresh based on ACL Changes
- Configuring an EPBR Session
Configuring EPBR on an Ethernet Interface
- Configuring an EPBR Policy
- Deleting an EPBR Policy
- Configuring the Policy in the Reverse Direction (IP)
- Deleting the Policy in the Reverse Direction (IP)
- Configuring the Policy in the Reverse Direction (IPv6)
-
- Configuring an IP Access-List Name
- Deleting an IP Access-List Name
- Configuring an IPv6 Access-List Name
- Deleting an IPv6 Access-List Name
- Configuring Clear Adjacency Statistics
- Deleting Clear Adjacency Statistics
- Adding a Service to a Policy
- Deleting a Service to a Policy
- Configuring Source-IP Based Load Balancing
- Deleting Source-IP Based Load Balancing
- Configuring the Action to be Taken on Failure of this Service
- Deleting the Action to be Taken on Failure of this Service
-
- Configuring Probe for Service Health-Checks
- Deleting Probe for Service Health-Checks
- Configuring the Retry Count When the Node Goes Down
- Deleting the Retry Count When the Node Goes Down
- Configuring an HTTP-Get Probe
- Deleting an HTTP-Get Probe
- Configuring a Source Interface for Probe
- Deleting a Source Interface for Probe
- Configuring an ICMP Probe Retry Count Frequency
- Deleting an ICMP Probe Retry Count Frequency
- Configuring an Reverse Service-End-Point Instance
- Deleting an Reverse Service-End-Point Instance
- Configuring an EPBR Service VRF Name
- Deleting an EPBR Service VRF Name
- Configuring a DNS Probe Retry Count Frequency
- Deleting a DNS Probe Retry Count Frequency
- Configuring an HTTP-Get Probe Retrycount
- Deleting an HTTP-Get Probe Retrycount
- Configuring an ICMP Probe Retrycount
- Deleting an ICMP Probe Retrycount
- Configuring an ICMP Retrycount Frequency
- Deleting an ICMP Retrycount Frequency
- Configuring the Interface Through Which Service is Connected (IP)
- Deleting the Interface Through Which Service is Connected (IP)
- Configuring the Interface Through Which Service is Connected (IPv6)
- Deleting the Interface Through Which Service is Connected (IPv6)
- Configuring an Interface Through Which All End Points of Service are Connected
- Deleting an Interface Through Which All End Points of Service are Connected
- Configure Probe for Reverse Endpoint
- Deleting Probe for Reverse Endpoint
-
- Configuring an IP Access-List Name
- Deleting an IP Access-List Name
- Configuring an IPv6 Access-List Name
- Deleting an IPv6 Access-List Name
- Configuring Abort EPBR Session
- Configuring Commit EPBR Session
- Adding a Service to a Policy
- Deleting a Service to a Policy
- Configuring Load Balance for Fail-Action
- Deleting Load Balance for Fail-Action
- Configuring a Probe
- Deleting a Probe
- Configuring a DNS Probe with Frquency, Retry Up and Down Count
- Deleting a DNS Probe with Frquency, Retry Up and Down Count
- Configuring a Source Interface in a Probe
- Deleting a Source Interface in a Probe
- Configuring a Probe for Reverse IP
- Deleting a Probe for Reverse IP
- Configuring Reverse IP
- Deleting Reverse IP
- Configuring a Load Balance Method
- Deleting a Load Balance Method
-
- Enabling PNP
- Disabling PNP
Configuring PVLAN on an Ethernet Interface
- Configuring a VLAN Addition to a PVLAN List
- Configuring a VLAN Removal from a PVLAN List
- Configuring a VLAN Addition to a PVLAN list
- Deleting a VLAN Addition to a PVLAN list
- Configuring a VLAN Removal from a PVLAN List
- Deleting a VLAN Removal from a PVLAN List
- Configuring Private-VLAN Trunk Secondary
- Deleting Private-VLAN Trunk Secondary
- Configuring the Private VLAN Host Association
- Deleting the Private VLAN Host Association
- Setting the Private VLAN Trunking Native Configuration
- Unsetting the Private VLAN Trunking Native Configuration
- Configuring VLAN Additions to the Trunk-Allowed VLAN List
- Deleting VLAN Additions to the Trunk-Allowed VLAN List
- Configuring VLAN Exceptions (Trunk-Allowed VLAN List)
- Deleting VLAN Additions to the Current List
- Configuring Setting Allowed VLANs when Interface is in Private-VLAN Trunking Mode (Trunk-Allowed VLAN List)
- Deleting Allowed VLANs when Interface is in Private-VLAN Trunking Mode (Trunk-Allowed VLAN List)
- Configuring VLAN Removal From the Trunk-Allowed VLAN List
- Deleting VLAN Additions to the Trunk-Allowed VLAN List
Configuring PVLAN on a Port Channel Interface
- Configuring a VLAN Addition to a PVLAN List
- Configuring a VLAN Removal from a PVLAN List
- Configuring a VLAN Addition to a PVLAN List
- Deleting a VLAN Addition to a PVLAN List
- Configuring a VLAN Removal from a PVLAN List
- Deleting a VLAN Removal from a PVLAN List
- Configuring PVLANs on FEX Trunk Ports
- Deleting PVLANs on FEX Trunk Ports
- Configuring Private-VLAN Trunk Secondary
- Deleting Private-VLAN Trunk Secondary
- Configuring the Private VLAN Host Association
- Deleting the Private VLAN Host Association
- Setting Private VLAN Trunking Native Configuration
- Unsetting Private VLAN Trunking Native Configuration
- Configuring a Trunk-Allowed VLAN List
- Deleting a Trunk-Allowed VLAN List
- Configuring VLAN Exceptions (Trunk-Allowed VLAN List)
- Setting Allowed VLANs when Interface is in Private-VLAN Trunking Mode (Trunk-Allowed VLAN List)
- Deleting Allowed VLANs when Interface is in Private-VLAN Trunking Mode (Trunk-Allowed VLAN List)
- Configuring VLAN Removal From the Trunk-Allowed VLAN List
Configuring PVLAN on a VLAN Interface
- Configuring VLAN Additions to the Private VLAN List (SVI Secondary VLANs)
- Deleting VLAN Additions to the Private VLAN List (SVI Secondary VLANs)
- Configuring VLAN Removal From the Current List (SVI Secondary VLANs)
- Deleting VLAN Removal From the Current List (SVI Secondary VLANs)
-
- Configuring the VLAN as a Community PVLAN
- Deleting the VLAN as a Community PVLAN
- Adding an Association Between PVLANs
- Removing a VLAN from a PVLAN List
- Deleting an Association Between PVLANs
Configuring an Ethernet Interface (Layer 2)
- Configuring Router Guard IP Multicast VLAN
- Deleting Router Guard IP Multicast VLAN
- Configuring Router Guard IPv6 Multicast VLAN
Configuring IGMP Global Parameters
- Configuring Subnet Check for Layer 3 IGMP Querier Election
- Deleting Subnet Check for Layer 3 IGMP Querier Election
- Configuring a VLAN List to Drop Unknown Multicast Traffic
- Deleting a VLAN List to Drop Unknown Multicast Traffic
- Configuring Spoof Check for IGMP
- Deleting Spoof Check for IGMP
- Configuring CLI Events for MLD
- Deleting CLI Events for MLD
- Configuring Group Events for MLD
- Deleting Group Events for MLD
- Configuring HA Events for MLD
- Deleting HA Events for MLD
- Configuring Interface Events for MLD
- Deleting Interface Events for MLD
- Configuring Internal Events for MLD
- Deleting Internal Events for MLD
- Configuring Policy Events for MLD
- Deleting Policy Events for MLD
- Configuring VRF Events for MLD
- Deleting VRF Events for MLD
- Configuring Interface-Debug Events for MLD
- Deleting Interface-Debug Events for MLD
- Configuring Group-Debug Events for MLD
- Deleting Group-Debug Events for MLD
- Configuring the IP IGMP Logging Level
- Deleting the IP IGMP Logging Level
- Configuring Router Guard for Multicast Packet Processing
- Deleting Router Guard for Multicast Packet Processing
- Configuring Router Guard for Multicast Packet Proccesing
- Deleting Router Guard for Multicast Packet Proccesing
- Configuring an IGMP Table Syslog Threshold
- Deleting an IGMP Table Syslog Threshold
- Configuring the MLD Table Syslog Threshold
- Deleting the MLD Table Syslog Threshold
Configuring IGMP Under a VLAN Configuration
- Deleting Router Guard IPv6 Multicast VLAN
- Configuring a Group Address for Proxy Leave
- Deleting a Group Address for Proxy Leave
- Configuring IP IGMP Snooping Report Flood All
- Deleting IP IGMP Snooping Report Flood All
- Configuring IP IGMP Snooping Report Flood Ethernet Interface
- Deleting IP IGMP Snooping Report Flood Ethernet Interface
Configuring Global MLD Snooping
- Configuring IPv6 MLD Snooping Events
- Deleting IPv6 MLD Snooping Events
- Configuring the Event History Buffer Size for MFDM Events
- Deleting the Event History Buffer Size for MFDM Events
- Configuring the Event History Buffer Size for MFDM-Sum Events
- Deleting the Event History Buffer Size for MFDM-Sum Events
- Deleting the Event History Buffer Size for MLD-Snoop-Internal Events
- Configuring the Event History Buffer Size as Medium for VLAN Events
- Deleting the Event History Buffer Size as Medium for VLAN Events
- Configuring the Event History Buffer Size as Large for VLAN Events
- Deleting the Event History Buffer Size as Large for VLAN Events
- Configuring the Event History Buffer Size for VPC Events
- Deleting the Event History Buffer Size for VPC Events
- Configuring VLAN/BD Link-Local Groups Suppression
- Deleting VLAN/BD Link-Local Groups Suppression
- Configuring MLDv1 Report Suppression for the VLAN/BD
- Deleting MLDv1 Report Suppression for the VLAN/BD
- Configuring MLDv2 Report Suppression and Proxy Reporting for the VLAN/BD
- Deleting MLDv2 Report Suppression and Proxy Reporting for the VLAN/BD
Configuring MRIB Under a VRF Interface
- Configuring Resilient RPF Interface
- Deleting Resilient RPF Interface
Configuring Global IP Multicast Parameters
- Configuring Resilient RPF Interface
- Deleting Resilient RPF Interface
Configuring Software Replication of PIM ASM Leak Packets
- Deleting Software Replication of PIM ASM Leak Packets
Configuring Multicast Service Reflection
- Configuring the Interface to be a Boundary of a PIM-SM Domain
- Querying the IP PIM Border Router Using YANG (Netconf)
- Unconfiguring an IP PIM Border Router
- Configuring the UDP Source Port
- Deleting the UDP Source Port
- Configuring a Source Interface (Loopback)
- Deleting a Source Interface (Loopback)
- Configuring the Map-to-Service Interface
- Deleting the Map-to-Service Interface
- Configuring a Static OIF
- Configuring an IP Service-Reflect Mode Egress
- Configuring an IP Service-Reflect Mode Ingress
Configuring IPv6 MFWD Event History Buffers
- Configuring CLI Event History Buffers for MCASTFWD
- Deleting CLI Event History Buffers for MCASTFWD
- Configuring Event History Buffers for MCASTFWD Internal Events
- Deleting Event History Buffers for MCASTFWD Internal Events
- Configuring Event History Buffers for Layer 2 Events
- Deleting Event History Buffers for Layer 2 Events
- Configuring Event History Buffers for NBM Events
- Deleting Event History Buffers for NBM Events
- Configuring Event History Buffers for Packet Events
- Deleting Event History Buffers for Packet Events
- Configuring Event History Buffers for VRF events
- Deleting Event History Buffers for VRF events
Configuring Priority Flow Control on an Ethernet Interface
- Configuring Priority Flow Control in Auto Mode
- Forcing Priority Flow Control Off
- Configuring DCBX TLV for PFC
- Configuring PFC Watch-Dog Interval to On
- Configuring PFC Watch-Dog Interval to Off
- Deleting PFC Watch-Dog Interval
- Configuring Priorty Flow Control, Disable Action, and Shutdown Multiplier
- Deleting Priorty Flow Control, Disable Action, and Shutdown Multiplier
- Disabling Statistics for a Policy
- Enabling Statistics
Configuring Priority Flow Control on an NVE Interface
- Disabling Statistics for a Policy
- Enabling Statistics for a Policy
-
- Configuring IEEE 802.1Q Class of Service
- Deleting IEEE 802.1Q Class of Service
- Configuring Disable Dynamic Load Balancing
- Deleting Disabled Dynamic Load Balancing
- Configuring DSCP in Tunnel Encapsulation
- Deleting DSCP in Tunnel Encapsulation
- Configuring AF12 DSCP (001100)
- Deleting AF12 DSCP (001100)
- Configuring to Push the Label and Set New One on Top
- Deleting the Config to Push the Label and Set New One on Top
- Configuring the Immediate Precedence
- Unconfiguring the Immediate Precedence
- Configuring the QoS Group
- Deleting the QoS Group
-
- Querying IS-IS Adjacency
- Querying IS-IS Adjacency Ethernet Interfaces
- Querying IS-IS Adjacency VRF
Configuring Secure VXLAN EVPN Multi-Site using CloudSec
- Configuring Tunnel Encryption
- Deleting Tunnel Encryption
- Configuring a Tunnel Encryption Policy
- Deleting a Tunnel Encryption Policy
- Configuring the Window Size
- Deleting the Window Size
- Configuring the Time in Seconds to Force SAK Rekey
- Deleting the Time in Seconds to Force SAK Rekey
- Configuring GCM AES XPN 128 Bit Encryption
- Deleting GCM AES XPN 128 Bit Encryption
- Configuring a Tunnel Encryption Peer IP
- Deleting a Tunnel Encryption Peer IP
- Configuring a Key Chain
- Deleting a Key Chain
- Configuring Tunnel Encryption Must-Secure Global Policy
- Deleting Tunnel Encryption Must-Secure Global Policy
- Configuring Advertise-PIP Towards DCI
- Deleting Advertise-PIP Towards DCI
- Configuring Encryption on the Port
- Deleting Encryption on the Port
- Configuring Encryption on the Port
- Deleting Encryption on the Port
- Configuring Encryption on the Port
- Deleting Encryption on the Port
- Configuring Encryption on the Port
- Deleting Encryption on the Port
Loop prevention and detection in VxLAN EVPN
- Configuring Loop Detection
- Disabling Loop Detection
- Disabling Detection on a VLAN
- Configuring the Loop Detection Probe Interval
- Deleting the Configured Loop Detection Probe Interval
- Configuring the Time Interval to Send Recovery Probes
- Deleting the Time Interval to Send Recovery Probes
- Configuring an NGOAM Loop Detection Probe
- Deleting an NGOAM Loop Detection Probe
- Configuring NGOAM Loop Detection Bring Up
- Deleting NGOAM Loop Detection Bring Up
MVPN Configuration for the Handoff Node
- Configuring the MTU for Backbone Multicast Distribution Tree
- Deleting the MTU for Backbone Multicast Distribution Tree
- Configuring the Hardware Profile for Module for MVPN Statistics
- Deleting the Hardware Profile for Module for MVPN Statistics
Configuring Critical Flow Prioritization for Multicast Groups
- Enabling Critical Flow Prioritization for Multicast Groups
- Disabling Critical Flow Prioritization for Multicast Groups
VNF Multipath Enhancements (Proportional VNF) Some parts are CIA-OUT)
- Configuring the Gateway IP for Type 5 EVPN Routes
- Deleting the Gateway IP for Type 5 EVPN Routes
- Configuring Nexthop Address as the Gateway IP
- Deleting Nexthop Address as the Gateway IP
- Configuring Multipath for Local Paths
- Deleting Multipath for Local Paths
- Configuring Multipath for Local Paths
- Deleting Multipath for Local Paths
- Configuring Multipath for Local Paths
- Deleting Multipath for Local Paths
-
- Configuring UDP Forwarding
- Deleting UDP Forwarding
- Configuring UDP Forwarding (Using UDP Port Number)
- Deleting UDP Forwarding (Using UDP Port Number)
- Configuring UDP Relay
- Deleting UDP Relay
- Configuring UDP Relay IP Address Group
- Deleting UDP Relay IP Address Group
- Configuring UDP Forwarding for Subnet Broadcast
- Deleting UDP Forwarding for Subnet Broadcast
Configuring License Reservation
- Enabling License Reservation
- Disabling License Reservation
Configuring Forward Link-Level PDUs
- Configuring Forward_PDU
- Deleting Forward_PDU
-
- Configuring the GRPC Port Number
- Deleting the GRPC Port Number
- Configuring the Certificate Id
- Deleting the Certificate Id
- Deleting the GRPC Set VRF
- Configuring the Max Concurrent Calls for GRPC GNMI
- Deleting the Max Concurrent Calls for GRPC GNMI
-
- Configuring the Number of Maximum Simultaneous Client Sessions for Netconf
- Deleting the Number of Maximum Simultaneous Client Sessions for Netconf
- Configuring the Netconf Duration until Idle Session Expires
- Deleting the Netconf Duration until Idle Session Expires
-
- Configuring the System Threshold Percentage
- Reverting the System Threshold Percentage to the Default Value
- Configuring System Monitoring
- Deleting System Monitoring
Optimizing Bandwidth Utilization
- Configuring NBM VRF in PIM Active Mode to Restrict Reserving RPF Bandwidth if Only Valid Receivers
- Deleting Global Knob to Restrict Reserving RPF Bandwidth if Only Valid Receivers
Logging System Messages to a File
- Configuring the Persistent Logging Utilization Alert Threshold in Percentage
- Unconfiguring the Persistent Logging Utilization Alert Threshold in Percentage
Configuring a MACsec Keychain and Keys
- Configuring a MACsec Keychain
- Deleting a MACsec Keychain
- Configuring a Tunnel-Encryption Keychain
- Deleting a Tunnel-Encryption Keychain
- Configuring Keychain Management
- Deleting Keychain Management
- Configuring MACsec Preshared Key as Do Not Show
- Deleting MACsec Preshared Key as Do Not Show
- Configuring Tunnel-Encryption Preshared Key as Do Not Show
- Deleting Tunnel-Encryption Preshared Key as Do Not Show
- Configuring a Key
- Configuring a Tunnel-Encryption Key Chain
- Configuring HMAC-SHA-256 Authentication Algorithm
- Deleting HMAC-SHA-256 Authentication Algorithm
- Configuring the Timezone for Accept Lifetime of the Key
- Deleting the Timezone for Accept Lifetime of the Key
- Configuring the Timezone for the Send Lifetime of the Key
- Deleting the Timezone for the Send Lifetime of the Key
- Configuring a Key
- Deleting a Key
- Configuring the Timezone for the Send Lifetime
- Deleting the Timezone for the Send Lifetime
- Configuring the Cryptographic-Algorithim AES-256-CMAC
- Deleting the Cryptographic-Algorithim AES-256-CMAC
- Configuring the Cryptic Algorithim AES-128-CMAC
- Deleting the Cryptic Algorithim AES-128-CMAC
- Configuring a Key
- Deleting a Key
- Configuring the Timezone for the Send Lifetime
- Deleting the Timezone for the Send Lifetime
- Configuring the Cryptic Algorithim AES-128-CMAC
- Deleting the Cryptic Algorithim AES-128-CMAC
- Deleting the Cryptic Algorithim AES-256-CMAC
- Deleting the Cryptic Algorithim AES-256-CMAC
Support PIP (Portable IP) routes with Gateway IPs in EVPN
- Configuring Next-Hop Address as Gateway IP
- Deleting Next-Hop Address as Gateway IP
- Configuring Forward Packets Over Multipath Paths (L2VPN EVPN AF)
- Deleting Forward Packets Over Multipath Paths (L2VPN EVPN AF)
- Configuring Forward Packets Over Multipath Paths (IPv4 Unicast AF)
- Deleting Forward Packets Over Multipath Paths (IPv4 Unicast AF)
- Configuring Forward Packets Over Multipath Paths (IPv6 Unicast AF)
- Deleting Forward Packets Over Multipath Paths (IPv6 Unicast AF)
Configuring LLFC Watch-Dog Interval Globally
- Enabling LLFC Watch-Dog Interval Globally
- Disabling LLFC Watch-Dog Interval Globally
Configuring DSCP Wildcard Mask
- Configuring DSCP Wildcard Mask for IPv4
- Deleting DSCP Wildcard Mask for IPv4
- Configuring the DSCP Bit Mask on Which to Match or Filter Traffic for IPv4
- Deleting the DSCP Bit Mask on Which to Match or Filter Traffic for IPv4
- Configuring DSCP Wildcard Mask for IPv6
- Deleting DSCP Wildcard Mask for IPv6
- Configuring the DSCP Bit Mask on Which to Match or Filter Traffic for IPv6
- Deleting the DSCP Bit Mask on Which to Match or Filter Traffic for IPv6
Enabling MAB for the Authentication of the Data Traffic with the RADIUS Server.
- Configuring the Authentication Order
- Deleting the Authentication Order
Configuring RTP Flow Monitoring
- Configuring the RTP Flow Error History Size
Configuring Certificate Authority Related Information
- Configuring Local and Remote Certstore
- Configuring Local Certstore
- Configuring Remote Certstore
- Deleting Remote Certstore
- Configuring Refresh-Time to Fetch CRL From Remote Certstore
- Deleting Refresh-Time to Fetch CRL From Remote Certstore
- Configuring LDAP Certstore
- Deleting LDAP Certstore
- Configuring Trustpoint Certificate Authority
- Deleting Trustpoint Certificate Authority
- Configuring a Mapping Filter for SSH
- Deleting a Mapping Filter for SSH
- Configuring a Mapping Filter for SSH (Default VRF)
- Deleting a Mapping Filter for SSH (Default VRF)
- Configuring Certificate Map Filters
- Deleting Certificate Map Filters
Configuring Certificatemap Filters
- Configuring an Email Id as an Alternate Name
- Deleting an Email Id as an Alternate Name
- Configuring Principal Name as an Alternate Name
- Deleting Principal Name as an Alternate Name
- Configuring Subject Name of the Certificate
- Deleting Subject Name of the Certificate
Configuring a Trustpoint Certificate Authority
- Configuring Trustpoint Enrollment
- Deleting Trustpoint Enrollment
- Configuring Trustpoint RSA Key-Pair Details
- Deleting Trustpoint RSA Key-Pair Details
Configuring a Trustpool Policy
- Configuring Cabundle URL
- Deleting Cabundle URL
- Configuring an HTTP Proxy Server Port
- Configuring Source Interface to Reach HTTP Server
- Deleting Source Interface to Reach HTTP Server
- Configuring the VRF to be Used to Contact HTTP Server
- Deleting the VRF to be Used to Contact HTTP Server
- Configuring the VRF to be Used to Contact HTTP Server (Default VRF)
- Deleting the VRF to be Used to Contact HTTP Server (Default VRF)
- Configuring the Management VRF
- Deleting the Management VRF
Configuring Frequency Synchronization
- Configuring fsync
- Deleting fsync
- Configuring ITU-T QL Option 2 Generation
- Configuring ITU-T QL Option 2 Generation
- Configuring Clock Identity
- Deleting Clock Identity
- Configuring Receive Timer During Update
- Deleting Receive Timer During Update
Configuring Frequency Synchronization on an Interface
- Configuring this Source for Selection
- Deleting this Source for Selection
- Configuring the Source Priority
- Deleting the Source Priority
- Configuring the Wait-to-Restore Time
- Removing Frequency Synchronization from an Interface
- Configuring SSM Disable
- Deleting SSM Disable
- Configuring Members of a Link Aggregation or PO
- Deleting Members of a Link Aggregation or PO
Configuring LLDP in Global Mode
- Enabling LLDP on Port Channels
- Disabling LLDP on Port Channels
- Configuring Multiple LLDP Neighbors Per Interface
- Deleting Multiple LLDP Neighbors Per Interface
Configuring PTP Clock Correction
- Configuring the Frequency Correction From Hardware or Software
- Deleting the Frequency Correction From Hardware or Software
- Enabling Increasing Number of PTP Sessions per System by Offloading Some Timers to Linecard
- Disabling Increasing Number of PTP Sessions per System by Offloading Some Timers to Linecard
- Configuring the Domain Clock Class Threshold
- Deleting the Domain Clock Class Threshold
- Configuring the Domain Priority
- Deleting the Domain Priority
- Configuring PTP Multi-Domain
- Deleting PTP Multi-Domain
- Configuring PTP Multi-Domain Transition-Attributes Priority1
- Deleting PTP Multi-Domain Transition-Attributes Priority1
- Configuring PTP Multi-Domain Priority Domain Conversion Priority2 Value
- Deleting PTP Multi-Domain Priority Domain Conversion Priority2 Value
- Configuring Marker Packet Interval
- Deleting Marker Packet Interval
- Configuring PTP Clock Identity
- Deleting PTP Clock Identity
- Configuring PTP Grandmaster Capability
- Deleting PTP Grandmaster Capability
- Configuring PTP Convergence Time in Seconds
- Deleting PTP Convergence Time in Seconds
- Configuring PTP Clock Sync to Auto Adjust Frequency
- Deleting PTP Clock Sync to Auto Adjust Frequency
- Configuring Management Packet Support
- Deleting Management Packet Support
- Configuring Tolerance for Mean-Path-Delay Variation
- Deleting Tolerance for Mean-Path-Delay Variation
- Configuring for Reverse-Path Delay Variation
- Deleting for Reverse-Path Delay Variation
- Configuring the Clock Protocol
- Deleting the Clock Protocol to None
- Configuring the Clock Protocol to NTP
- Deleting the Clock Protocol to NTP
- Configuring the Clock Protocol to PTP
- Deleting the Clock Protocol to PTP
- Configuring the PTP Clock Operation
- Deleting the PTP Clock Operation
- Configuring the Correction Range Threshold Value
- Deleting the Correction Range Threshold Value
- Configuring Logging for Corrections Exceeding Threshold Value
- Deleting Logging for Corrections Exceeding Threshold Value
- Configuring Boundary Clock
- Deleting Boundary Clock
- Configuring Generalized PTP
- Deleting Generalized PTP
- Configuring PTP Clock Domain
- Deleting PTP Clock Domain
- Configuring Mean-Path-Delay Threshold Value
- Deleting Mean-Path-Delay Threshold Value
- Configuring Mean Peer Delay Request Interval Logging
- Deleting Mean Peer Delay Request Interval Logging
- Configuring PTP Priority1
- Deleting PTP Priority1
- Configuring PTP Priority2
- Deleting PTP Priority2
- Configuring the Source IP Address
- Deleting the Source IP Address
- Configuring a Marker Packet Interval
- Deleting a Marker Packet Interval
- Configuring the Ether Header Ether Type For TTAG
- Disabling the Ether Header Ether Type For TTAG
Configuring PTP on an Ethernet Range
- Configuring PTP Multicast Transmission
- Configuring PTP Unicast Transmission
- Configuring the PTP Sync Interval
- Deleting the PTP Sync Interval
- Configuring the PTP Sync Interval as AES67-2015
- Deleting the PTP Sync Interval as AES67-2015
- Configuring the PTP Sync Interval as SMPTE-2059-2
- Deleting the PTP Sync Interval as SMPTE-2059-2
- Configuring the Source IP Address for UCAST Messages
- Deleting the Source IP Address for UCAST Messages
- Configuring the PTP Delay Request Minimum Interval
- Deleting the PTP Delay Request Minimum Interval
- Configuring the PTP Delay Request Minimum Interval as AES67-2015
- Deleting the PTP Delay Request Minimum Interval as AES67-2015
- Configuring the PTP Delay Request Minimum Interval as SMPTE-2059-2
- Deleting the PTP Delay Request Minimum Interval as SMPTE-2059-2
- Configuring the PTP Announce Timeout
- Deleting the PTP Announce Timeout
- Configuring the PTP Announce Timeout as AES67-2015
- Deleting the PTP Announce Timeout as AES67-2015
- Configuring the PTP Announce Timeout as SMPTE-2059-2
- Deleting the PTP Announce Timeout as SMPTE-2059-2
- Configuring PTP Announce Interval
- Deleting PTP Announce Interval
- Configuring PTP Announce Interval as AES67
- Deleting PTP Announce Interval as AES67
- Configuring PTP Announce Interval as SMPTE-2059-2
- Deleting PTP Announce Interval as SMPTE-2059-2
- Configuring PTP Unicast Master
- Deleting PTP Unicast Master
- Configuring a Dynamic PTP Role
- Configuring a Master-Only Role
- Configuring PTP Unicast Slave
- Deleting PTP Unicast Slave
- Configuring the Cost Associated With the Interface
- Deleting the Cost Associated With the Interface
- Configuring PTP Clock Domain
- Deleting PTP Clock Domain
- Configuring GPTP Propagation Delay Threshold
- Deleting GPTP Propagation Delay Threshold
- Configuring PTP VLAN
- Deleting PTP VLAN
- Configuring Hardware TTAG Timestamp
- Deleting Hardware TTAG Timestamp
- Configuring Strip TTAG From Egress Packet on This Interface
- Deleting Strip TTAG From Egress Packet on This Interface
Configuring PTP on an Interface
- Enabling PTP on an Interface
- Disabling PTP on an Interface
- Configuring a PTP Clock Domain
- Deleting a PTP Clock Domain
- Configuring the Cost Associated With the Interface
- Deleting the Cost Associated With the Interface
- Configuring PTP Multicast Transmission
- Configuring PTP Unicast Transmission
- Configuring the Marker Packet on an Interface
- Deleting the Marker Packet on an Interface
- Configuring the PTP Sync Interval
- Deleting the PTP Sync Interval
- Configuring the PTP Sync Interval as AES67-2015
- Deleting the PTP Sync Interval as AES67-2015
- Configuring the PTP Sync Interval as SMPTE-2059-2
- Deleting the PTP Sync Interval as SMPTE-2059-2
- Configuring the PTP Delay Request Minimum Interval
- Deleting the PTP Delay Request Minimum Interval
- Configuring the PTP Delay Request Minimum Interval as AES67-2015
- Deleting the PTP Delay Request Minimum Interval as AES67-2015
- Configuring the PTP Delay Request Minimum Interval as SMPTE-2059-2
- Deleting the PTP Delay Request Minimum Interval as SMPTE-2059-2
- Configuring PTP Announce Interval
- Deleting PTP Announce Interval
- Configuring PTP Announce Interval as AES67
- Deleting PTP Announce Interval as AES67
- Configuring PTP Announce Interval as SMPTE-2059-2
- Deleting PTP Announce Interval as SMPTE-2059-2
- Deleting the PTP Announce Timeout
- Configuring PTP Announce Timeout as AES67-2015
- Deleting PTP Announce Timeout as AES67-2015
- Configuring PTP Announce Timeout as SMPTE-2059-2
- Deleting PTP Announce Timeout as SMPTE-2059-2
- Configuring PTP IPv4 Transport
- Deleting PTP IPv4 Transport
- Configuring a Dynamic PTP Role
- Configuring a Master-Only Role
- Configuring a Slave-Only Role
-
- Configuring PTP Notifications for High Corrections (Default Options)
- Configuring How PTP Notifications for High Corrections are Sent Immediately
- Configuring How PTP Notifications for High Corrections are Sent With a Non-Default Interval
- Configuring How PTP Notifications for High Corrections are Sent Periodically With or Without High-Corrections During the Interval
- Configuring How PTP Notifications for High Corrections are Sent Periodically Only if There are No High-Corrections During the Interval
- Deleting PTP Notification for High Corrections
-
- Configuring Notifications for Changes in the PTP Grand Master
- Deleting Notifications for Changes in the PTP Grand Master
- Configuring Notifications for Changes in PTP Parent
- Deleting Notifications for Changes in PTP Parent
- Configuring How PTP Notifications are Sent for Port-State Changes (Default Options)
- Configuring How PTP Notifications are Sent for All Port-State Changes
- Configuring How PTP Notifications are Sent for Master-Slave-Only Port-State Changes
- Configuring How PTP Notifications are Sent for Port-State Changes Immediately
- Configuring How PTP Notifications are Sent for Port-State Changes at Fixed Intervals
- Configuring How PTP Notifications are Sent for Port-State Changes at Fixed Intervals With or Without State Changes During the Interval
- Configuring How PTP Notifications are Sent for Port-State Changes at Fixed Intervals Only if No State Changes are Made During the Interval
- Configuring How PTP Notifications are Sent for All Categories of Port-State Changes at Fixed Intervals With or Without State Changes During the Interval
- Deleting Notifications for Changes in Port-State Changes
- Disabling Notifications for Changes in Port-State Changes
-
- Configuring Packet Acceptance and Response Based on Config (Non-Forwardable)
- Deleting Packet Acceptance and Response Based on Config (Non-Forwardable)
- Configuring Drop Packet and No Response (Non-Forwardable)
- Deleting Drop Packet and No Response (Non-Forwardable)
- Configuring Packet Acceptance and Response Based on Received Packet (Non-Forwardable)
- Deleting Packet Acceptance and Response Based on Received Packet (Non-Forwardable)
- Configuring Packet Acceptance and Response Based on Config (Forwardable)
- Deleting Packet Acceptance and Response Based on Config (Forwardable)
- Configuring Drop Packet and No Response (Forwardable)
- Deleting Drop Packet and No Response (Forwardable)
- Configuring Packet Acceptance and Response Based on Received Packet (Forwardable)
- Deleting Packet Acceptance and Response Based on Received Packet (Forwardable)
- Configuring Override of Some PTP Profile Parameters on an Interface
- Deleting Override of Some PTP Profile Parameters on an Interface
-
- Configuring Override of Some PTP Profile Parameters on an Interface
- Deleting Override of Some PTP Profile Parameters on an Interface
- Configuring Packet Acceptance and Response Based on Config (Non-Forwardable)
- Deleting Packet Acceptance and Response Based on Config (Non-Forwardable)
- Configuring Drop Packet and No Response (Non-Forwardable)
- Deleting Drop Packet and No Response (Non-Forwardable)
- Configuring Packet Acceptance and Response Based on Received Packet (Non-Forwardable)
- Deleting Packet Acceptance and Response Based on Received Packet (Non-Forwardable)
- Configuring Packet Acceptance and Response Based on Config (Forwardable)
- Deleting Packet Acceptance and Response Based on Config (Forwardable)
- Configuring Drop Packet and No Response (Forwardable)
- Deleting Drop Packet and No Response (Forwardable)
- Configuring Packet Acceptance and Response Based on Received Packet (Forwardable)
- Deleting Packet Acceptance and Response Based on Received Packet (Forwardable)
- Configuring PTP Ethernet Transport
- Deleting PTP Ethernet Transport
Configuring a PTP Telecom Profile
- Configuring PTP Telecom Profile Matching 8275.1
- Deleting PTP Telecom Profile Matching 8275.1
- Configuring a Default PTP Profile
- Configuring the PTP Profile Mode as Hybrid
- Configuring the Default PTP Profile Mode to None
-
- Configuring ACL-Based PTP Forwarding
- Deleting ACL-Based PTP Forwarding
-
- Configuring the MSDP Syslog Message Level
- Deleting the MSDP Syslog Message Level
- Configuring the MSDP Syslog Message Level
- Deleting the MSDP Syslog Message Level
- Configuring Global IPv6 Multicast Forwarding
- Deleting Global IPv6 Multicast Forwarding
- Configuring Syslog Message for Global IPv6 Multicast Forwarding
- Deleting Syslog Message for Global IPv6 Multicast Forwarding
-
- Configuring the Stripping of MPLS Headers
- Deleting the Stripping of MPLS Headers
Attaching a TAP Aggregation Policy to an Interface
- Configuring Tap Aggregation on an Interface
- Deleting Tap Aggregation on an Interface
Configuring an L2VPN EVPN Address Family under a Neighbor
- Configuring a Route Map to Specify Import Criteria
- Deleting a Route Map to Specify Import Criteria
- Reoriginating the Route with a New RT
- Deleting the Reoriginating Config
- Importing the Routes into Another Address Family (VPN EVPN Under a L2VPN EVPN AF)
- Deleting the Routes Imported into another Address Family (VPN EVPN Under a L2VPN EVPN AF)
Configuring a VPNv4 Unicast Subaddress Family Under a BGP Neighbor (IP Address)
- Configuring a Route Map to Specify Import Criteria
- Deleting a Route Map to Specify Import Criteria
- Reoriginating the Route with a New RT
- Deleting the Reoriginating Config
- Importing the Routes into another Address Family (L2VPN EVPN Under a VPNv4 Unicast AF)
- Deleting the Routes Imported into another Address Family (L2VPN EVPN Under a VPNv4 Unicast AF)
Configuring a VPNv6 Unicast Subaddress Family Under a BGP Neighbor (IP Address)
- Configuring a Route Map to Specify Import Criteria
- Deleting a Route Map to Specify Import Criteria
- Reoriginating the Route with a New RT
- Deleting the Reoriginating Config
- Importing the Routes into another Address Family (L2VPN EVPN Under a VPNv6 Unicast AF)
- Deleting the Routes Imported into another Address Family (L2VPN EVPN Under a VPNv6 Unicast AF)
Configuring a Template Peer Policy under a VRF
- Importing the Routes into another Address Family (L2VPN EVPN)
- Deleting the Routes Imported into another Address Family (L2VPN EVPN)
- Reoriginating the Route with a New RT
- Deleting the Reoriginating Config
- Importing the Routes into Another Address Family (VPN EVPN)
- Deleting the Routes Imported into another Address Family (VPN EVPN)
- Reoriginating the Route with a New RT
- Deleting the Reoriginating Config
Configuring BFD Multihop under a Neighbor
- Configuring a BFD Multihop Session
- Deleting a BFD Multihop Session
- Configuring the Detect Multiplier for BFD Sessions
- Deleting the Detect Multiplier for BFD Sessions
Configuring HSRP IPv4 on an Ethernet Interface
- Configuring MD5 Authentication
- Deleting MD5 Authentication
- Configuring Track Object to HSRP Group
- Deleting Track Object to HSRP Group
- Configuring Decrements When Tracked Object Goes Down
- Deleting Decrements When Tracked Object Goes Down
Configuring HSRP IPv6 on an Ethernet Interface
- Configuring MD5 Authentication
- Configuring Decrements When Tracked Object Goes Down
- Deleting Decrements When Tracked Object Goes Down
- Configuring Track Object to HSRP Group
- Deleting Track Object to HSRP Group
Configuring IS-IS in Router VRF Configuration Mode
- Configuring the Maximum Size of the Retransmit Queue
- Deleting the Maximum Size of the Retransmit Queue
- Configuring an Unlimited Retransmit Queue
- Deleting an Unlimited Retransmit Queue
Configuring OSPFv3 on an Ethernet Interface
- Configuring Multi-Area Associated with Interface
- Deleting Multi-Area Associated with Interface
- Configure ospfv3 authentication disable
- Configure ospfv3 authentication ipsec spi spi_id md5 authentication key
- Deleting ospfv3 authentication ipsec spi spi_id md5 authentication key
- Configure ospfv3 authentication ipsec spi spi_id sha1 authentication key
- Deleting ospfv3 authentication ipsec spi spi_id sha1 authentication key
- Configuring BFD on the Interface
- Deleting BFD on the Interface
Configuring a Virtual Link Under an OSPFv3 Instance
- Configure authentication ipsec spi spi_id md5 authentication key on a virtual link
- Delete authentication ipsec spi spi_id md5 authentication key on a virtual link
- Configure authentication ipsec spi spi_id sha1 authentication key on a virtual link
- Delete authentication ipsec spi spi_id sha1 authentication key on a virtual link
-
- Configuring the Area NSSA with a Route Map Filter Name
- Deleting the Area NSSA with a Route Map Filter Name
- Configuring to not Send Summary LSAs into a Stub Area
- Configuring Send Summary LSAs into Stub Area
- Configuring BFD under router instance
- Deleting BFD under router instance
- Configuring discard route external
- Deleting discard route external
- Configuring discard route internal
- Deleting discard route internal
- Configuring Log Adjacency Change Details
- Deleting Log Adjacency Change Details
- Configuring maxLsa attributes
- Deleting the maxLsa attributes
- Configuring to Log a Warning Message When the maxLsa Limit is Exceeded
- Deleting to Log a Warning Message When the maxLsa Limit is Exceeded
- Configuring max-metric router-lsa attributes
- Deleting max-metric router-lsa attributes
- Configuring the LSA Arrival
- Deleting the LSA Arrival
- Configuring Suppress of Forwarding Address in Translated LSAs
- Deleting Suppress of Forwarding Address in Translated LSAs
- Configure authentication ipsec spi spi_id md5 authentication key
- Delete authentication ipsec spi spi_id md5 authentication key
- Configure authentication ipsec spi spi_id sha1 authentication key
- Delete authentication ipsec spi spi_id sha1 authentication key
- Configuring area authentication ipsec spi spi_id sha1 authentication key
- Delete area authentication ipsec spi spi_id sha1 authentication key
- Configure area authentication disable
- Configure area authentication ipsec spi spi_id md5 authentication key
- Delete area authentication ipsec spi spi_id md5 authentication key
- Configure area authentication ipsec spi spi_id| sha1 authentication key
- Deleting area authentication ipsec spi spi_id| sha1 authentication key
- Configuring to Never Translate LSAs
- Deleting to Never Translate LSAs
- Configuring the Reference Bandwidth in Mbps/Gbps
- Deleting the Reference Bandwidth in Mbps/Gbps
- Configuring the Cost for Range of networks
- Configuring the Summary Address as Not Advertise
- Deleting the Summary Address as Not Advertise
- Configuring the Summary Address
- Deleting the Summary Address
- Configuring Table Map Filter
- Deleting Table Map Filter
- Configuring area level filter-list route-map
- Deleting area level filter-list route-map
- Configuring Filter Networks Sent from This Area
- Deleting Filter Networks Sent from This Area
- Configuring to Log a Warning Message When redistribution prefix Limit is Exceeded
- Deleting to Log a Warning Message When redistribution prefix Limit is Exceeded
- Configuring to Withdraw All Redistributed Routes
- Deleting to Withdraw All Redistributed Routes
- Configuring Maximum Paths
- Deleting Maximum Paths
- Configure timers throttle spf start-time hold-time max-time
- Delete timers throttle spf start-time hold-time max-time
- Configure area default-cost
- Delete area default-cost
- Configuring a VRF
- Configuring a VRF
- Configuring NSSA with route-map
- Deleting NSSA with route-map
- Configuring discard of an External Route
- Deleting discard of an External Route
- Configuring an discard of Internal Route
- Deleting discard of Internal Route
- Configuring maxLsa attributes
- Deleting maxLsa attributes
- Configuring to Log a Warning Message When max-lsa Limit is Exceeded
- Deleting to Log a Warning Message When max-lsa Limit is Exceeded
- Configuring Inter-Area-Prefix LSAs
- Deleting Inter-Area-Prefix LSAs
- Configuring the Minimum Interval Between Arrival of an LSA
- Deleting the Minimum Interval Between Arrival of an LSA
- Configure authentication disable on a virtual link
- Configure timers throttle lsa start-time hold-time max-time
- Delete timers throttle lsa start-time hold-time max-time
- Configure timers lsa-group-pacing interval
- Delete timers lsa-group-pacing interval
-
- Enabling MPLS Traffic Engineering Capability for a Given Area
- Disabling MPLS Traffic Engineering Capability for a Given Area
- Configuring an MPLS TE Multicast
- Deleting an MPLS TE Multicast
- Configuring MPLS TE Router ID
- Deleting MPLS TE Router ID
- Configuring Sham-Link Properties
- Deleting the Sham-Link Properties
- Configuring a Domain Id and Domain Tag
- Deleting a Domain Id and Domain Tag
- Configuring a Domain Id Type
- Deleting a Domain Id Type
-
- Configuring to Maintain Next-Hop Order as per CLI Config
- Deleting the Config to Maintain Next-Hop Order as per CLI Config
- Configuring to Drop Packets When Next-Hop is Unreachable
- Deleting the Config to Drop Packets When Next-Hop is Unreachable
-
- Configuring to Maintain Next-Hop Order as per CLI Config
- Deleting the Config to Maintain Next-Hop Order as per CLI Config
- Configuring to Drop Packets When Next-Hop is Unreachable
- Deleting the Config to Drop Packets When Next-Hop is Unreachable
Configuring Logging for Software Forwarding of IP Packets
- Configuring a Counter for Unicast Forward Packets
- Deleting a Counter for Unicast Forward Packets
Configuring Selective Q-in-VNI
- Configuring a Transit Box for Multi-Tag Ethernet Frames for a VLAN
- Deleting a Transit Box for Multi-Tag Ethernet Frames for a VLAN
-
- Configuring the Override Source Address of Routed MCAST Packets
- Deleting the Override Source Address of Routed MCAST Packets
- Configuring Suppress MAC-Only Route Advertiement
- Deleting Suppress MAC-Only Route Advertiement
- Configuring a Tunnel Endpoint
- Deleting a Tunnel Endpoint
- Configuring Spine Anycast Gateway
- Deleting Spine Anycast Gateway
Configuring Smart Software Licensing
- Configuring Smart License
- Disabling Smart License
- Enabling Smart License
- Disabling Smart License
-
- Configuring a Locator and Encapsulation Source
- Configuring Traffic Engineering
- Deleting Traffic Engineering
- Configuring a Policy
- Deleting a Policy
- Configuring SRv6 Under SRTE
- Deleting SRv6 Under SRTE
- Configuring the SRv6 SRTE Locators Item
- Deleting the SRv6 SRTE Locators Item
- Configuring the Default Locator Name
- Deleting the Default Locator Name
- Configuring a Route with Complete SRv6 Encap (Without Traffic Engineering Policy)
- Configuring a Route with Complete SRv6 Encap with Traffic Engineering Policy
- Configuring a Route with Complete SRv6 Encap with Traffic Engineering Policy via Color and Endpoint
- Configuring a Route with Traffic Engineering via a Policy Name
- Configuring a Route with Traffic Engineering via Color and Endpoint
- Enabling OFM
- Disabling OFM
- Enabling an SRv6 Tunnel Profile
- Configuring a Segment List
- Show IPv6 Route Detail
- Show IP Route Detail